Brother P-touch D450 Manual de usuario

www.brother.com

Read this User’s Guide before you start using your P-touch.

Keep this User’s Guide in a handy place for future reference.

Please visit us at http://support.brother.com/ where you can get product support and

answers to frequently asked questions (FAQs).

ENGLISH

USER’S GUIDE D450

INTRODUCTION

Thank you for purchasing the P-touch D450.

This manual contains various precautions and basic procedures for using this

labeller. Read this manual carefully before using and keep in a handy place for

future reference.

International ENERGY STAR®Compliance Statement

The purpose of the International ENERGY STAR®Program

is to promote the development and popularisation of energy-

efficient office equipment. As an ENERGY STAR®Partner,

Brother Industries, Ltd. has determined that this product

meets the ENERGY STAR®guidelines for energy efficiency.

Compilation and Publication Notice

Under the supervision of Brother Industries, Ltd., this manual has been compiled

and published, covering the latest product’s descriptions and specifications.

The contents of this manual and the specifications of this product are subject to

change without notice.

If new versions of the PT-D450 software become available, this manual may not

reflect the updated features. Therefore, you may find that the software and the

contents in this manual are different.

Any trade names and product names of companies appearing on Brother products,

related documents and any other materials are all trademarks or registered

trademarks of those respective companies.

BROTHER is either a trademark or a registered trademark of Brother Industries, Ltd.

INTRODUCTION

Contents

Safety Precautions................................................................................................. 4

General Precautions .............................................................................................. 6

GETTING STARTED.................................................................7

Unpacking Your P-touch........................................................................................ 7

LCD Display & Keyboard ....................................................................................... 7

Power Supply and Tape cassette .......................................................................... 9

When using AC adapter (AD-E001) ............................................................... 9

When using six new AA alkaline batteries (LR6) or fully charged

Ni-MH batteries (HR6) .................................................................................... 9

Insert a Tape Cassette ................................................................................. 10

Turning Power On/Off.......................................................................................... 11

Feeding Tape....................................................................................................... 11

Setting LCD Display............................................................................................. 11

LCD Contrast................................................................................................ 11

Back Light..................................................................................................... 11

How to use the P-touch ....................................................................................... 12

Create a label with the P-touch .................................................................... 12

Create a label by connecting your P-touch to a PC...................................... 13

EDITING A LABEL ..................................................................15

Entering and Editing Text .................................................................................... 15

Switching Upper Case/Lower Case.............................................................. 15

Select The Input Method .............................................................................. 15

Entering Text from the Keyboard.................................................................. 17

Adding a New Line ....................................................................................... 17

Adding a New Block ..................................................................................... 18

Deleting Text ................................................................................................ 18

Inserting a Tab.............................................................................................. 18

Entering Symbols................................................................................................. 19

Entering Symbols Using the Symbol Function ............................................. 19

Setting Symbol History ................................................................................. 19

Setting Character Attributes ([ 英字形 ]/[ 字大小 ]/[ 字寬 ]/[ 字體 ]/[ 底線 ]/

[ 對齊 ]/[ 字距 ]/[ 縱印 ]) ........................................................................................ 24

Setting Character Attributes by Label........................................................... 24

Setting Character Attributes by Each Line.................................................... 24

Setting 自動縮小設定.................................................................................... 26

Setting Frames .................................................................................................... 26

Setting Label Attributes ([ 長度 ]/[ 兩端空白 ]/[ 標籤空白長度 ])............................ 28

INTRODUCTION

Using Auto-Format Layouts ................................................................................. 28

Using Templates........................................................................................... 28

Using Block Layouts ..................................................................................... 32

Creating a Barcode Label .................................................................................... 34

Setting Barcode Parameters and Entering Barcode Data ............................ 34

Editing and Deleting a Barcode .................................................................... 36

LABEL PRINTING ...................................................................37

Previewing Labels................................................................................................ 37

Printing Labels ..................................................................................................... 37

Single and Multiple Copy Printing................................................................. 37

自動跳號 Printing .......................................................................................... 38

鏡像列印 Printing .......................................................................................... 38

Setting Tape Cutting Options............................................................................... 38

[大]/[ 小]/[ 省帶 ]/[ 不裁切 ]/[ 特別色帶 ]....................................................... 38

Adjusting the Label Length .................................................................................. 41

Printing from the Label Collection........................................................................ 41

Printing a label from the label collection stored in the P-touch..................... 41

Downloading a new Label Collection Category ............................................ 44

USING THE FILE MEMORY ...................................................45

Saving Label Files ............................................................................................... 45

Printing, Opening, or Deleting a Saved Label...................................................... 45

[列印 ]........................................................................................................... 45

[開啟舊檔 ] ................................................................................................... 45

[刪除 ]........................................................................................................... 46

RESETTING & MAINTAINING YOUR P-TOUCH ...................47

Resetting the P-touch .......................................................................................... 47

Resetting the Data Using the home key ....................................................... 47

Resetting the Data to Factory Settings Using the P-touch Keyboard........... 47

Maintenance ........................................................................................................ 48

Cleaning the Unit .......................................................................................... 48

Cleaning the Print Head ............................................................................... 48

Cleaning the Tape Cutter ............................................................................. 49

TROUBLESHOOTING ............................................................50

What to do when.................................................................................................. 50

When an error message appears on the display ................................................. 51

INTRODUCTION

APPENDIX ..............................................................................52

Specifications....................................................................................................... 52

System Requirements ......................................................................................... 53

INTRODUCTION

Safety Precautions

To prevent injury and damage, important notes are explained using various

symbols. The symbols and their meanings are as follows:

The symbols used in this manual are as follows:

WARNING Indicates a potentially hazardous situation which, if not

avoided, may result in death or serious injuries.

CAUTION Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injuries.

Action NOT allowed DO NOT touch a given portion of

the product

Mandatory action Unplugging is required

DO NOT disassemble the product Alerts to the possibility of

electrical shock

WARNING

Follow these guidelines to avoid the risk of fire, burns, injury, electric shocks,

rupture, overheating, abnormal odours or smoke.

Always use the specified voltage

and the suggested AC adapter

(AD-E001) for the P-touch to

prevent any damage or failure.

Do not touch the AC adapter and

P-touch during a thunder storm.

Do not use the P-touch/AC adapter

in places of high humidity such as

bathrooms.

Do not damage, or place heavy

objects on the power cord or plug.

Do not forcibly bend or pull the

power cord. Always hold the AC

adapter when disconnecting from

the power outlet.

Make sure that the plug is fully

inserted in the power outlet. Do not

use an outlet that is loose or

damaged.

Do not allow the P-touch/AC

adapter/power plug/batteries to get

wet, for example, by handling them

with wet hands or spilling liquids on

to them.

Since loss of eyesight may result

when leaked fluid from batteries

gets into your eyes, immediately

rinse your eyes with a large amount

of clean water, and then seek

medical attention.

Do not disassemble or modify the

P-touch/AC adapter/batteries.

Do not allow a metal object to

contact both the plus and minus

ends of a battery.

Do not use sharp objects, such as

tweezers or a metallic pen, to

change the batteries.

Do not throw the batteries into fire

or expose to heat.

Disconnect the AC adapter and

remove batteries immediately and

stop using the P-touch if you notice

abnormal odour, heat,

discolouration, deformation or

anything unusual while using or

storing it.

INTRODUCTION

Safety Precautions

Do not use a damaged or leaking

battery as the fluid may get on your

hands.

Do not use a deformed or leaking

battery or one whose label is

damaged. There is a possibility of it

generating heat.

Do not touch metal parts around

the print head immediately after

printing.

When the P-touch is not being

used, store it out of the reach of

children. In addition, do not allow

children to put any P-touch parts or

labels in their mouths. If any object

has been swallowed, seek medical

attention.

Do not use a damaged adapter

cord or power plug.

Do not use the P-touch if a foreign

object enters the P-touch. If any

foreign object enters the P-touch,

disconnect the AC adapter and

remove the batteries, and contact

Brother customer service.

CAUTION

Follow these guidelines to avoid personal injury, liquid leakage, burns or heat.

Do not touch the cutter blade.

If leaked fluid from batteries gets on

your skin or clothes, immediately

rinse them with clean water.

Remove the batteries and

disconnect the AC adapter if you do

not intend to use the P-touch.

Do not use a battery other than that

specified. Do not use combinations

of old and new batteries or

combinations of different types,

different charging levels, different

manufacturers or different models.

Do not insert a battery with the

polarity (+ and -) reversed.

Do not drop or hit the P-touch/

AC adapter.

Do not press on the LCD display.

Do not put your finger inside the

P-touch when you close the tape

cassette compartment cover or

battery compartment cover.

Before using Ni-MH rechargeable

batteries, carefully read the

instructions for the batteries and

battery charger, and be sure to use

them correctly.

When using Ni-MH rechargeable

batteries, charge the batteries with

a specialised battery charger

before using the batteries.

WARNING

INTRODUCTION

General Precautions

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, or the colour of the label may change or be

transferred to other objects. Before applying the label, check the environmental

conditions and the material.

• Do not use the P-touch in any way or for any purpose not described in this guide.

Doing so may result in accidents or damage to the P-touch.

• Use Brother TZe tapes with the P-touch.

• Only use a soft, dry cloth to clean the labeller; never use alcohol or other organic

solvents.

• Use a soft wipe to clean the print head; never touch the print head.

• Do not put any foreign objects into the tape exit slot, AC adapter connector or

USB port, etc.

• Do not place the P-touch/batteries/AC adapter in direct sunlight or rain, near

heaters or other hot appliances, in any location exposed to extremely high or low

temperatures (e.g., on the dashboard or in the back of your car) or high humidity,

or in dusty locations.

• Do not apply excessive pressure to the cutter lever.

• Do not try to print if the cassette is empty; it will damage the print head.

• Do not pull the tape while printing or feeding; it will damage the tape and the

P-touch.

• It is recommended that you use the USB cable supplied with the P-touch. Should

another USB cable need to be used, ensure it is of high quality construction.

• Any data saved in memory may be lost due to failure or repair of the P-touch, or

if the battery expires.

• The P-touch is not equipped with a charging feature for rechargeable batteries.

• The printed text may differ from the text that appears on the LCD.

• The length of the printed label may differ from the displayed label length.

• When power is disconnected for two minutes, all text, format settings and any text

files saved in the memory will be cleared.

• You can also use Heat Shrink Tube in this model. Check the Brother website

(http://www.brother.com/) for further information. You cannot print frames,

pre-set P-touch templates, or use certain font settings when using Heat Shrink

Tube. Printed characters may also be smaller than when using TZe tape.

•A protective clear plastic sticker is placed over the display during

manufacturing and shipping. This sticker should be removed prior to use.

Unpacking Your P-touch

GETTING STARTED

Unpacking Your P-touch

LCD Display & Keyboard

Carton Contents

P-touch

Starter Tape Cassette

AC adapter

USB Cable

User’s Guide

87123456

11 12

15 16 17 18 19 20

31 32 33 34 35

25 30

GETTING STARTED

LCD Display & Keyboard

NOTE

• When the caps mode is on, all characters you type will be in

uppercase letters.

• The text that you enter can be up to 280 characters in length.

• Use ( ) in combination with the letter and number keys to type

uppercase letters or the symbols indicated on the upper-right corner

of the keys.

• Use or with ( ) to go to the start of the previous or next

block.

• Use or with ( ) to go to the start or end of the current line.

• While selecting the settings, press ( ) to go back to the

default item.

• Unless otherwise mentioned, press ( ) to cancel any operation.

• Press ( ) to return to the home screen.

• Label length shown on the LCD may slightly differ from the actual

label length when printed.

1. Input mode

2-7. Style guidance

8. Tape width x Label length

9. Block number

10. Line number

11. Cursor

12. Return mark

13. Power

14. Home

15. 字形

16. 標籤格式

17. 外框

18. 符號

19. 儲存

20. 預覽

21. 列印

22. 縱向列印

23. Tab

24. 背光

25. Shift

26. 全部刪除

27. 倒退

28. Cursor

29. 取消

30. 執行

31. A/a

32. 倉/簡/廣

33. 空格 /轉換

34. 條碼

35. 段落更換

36. Letter

Otros manuales para P-touch D450

Tabla de contenidos

Otros manuales de Etiquetadora de Brother

Brother

Brother P-touch PT-9400 Manual de usuario

Brother

Brother P-Touch 2730 Manual de usuario

Brother

Brother PT-65 Manual

Brother

Brother VC-500W Manual de usuario

Brother

Brother P-touch PT-P300BTBU Manual de usuario

Brother

Brother P-touch PT-2200 Manual de usuario

Brother

Brother P-touch Embelish PT-D215e Manual de usuario

Brother

Brother QL-1050 Manual de usuario

Brother

Brother P-touch PT-D410 Manual de usuario

Brother

Brother QL-500W Manual de usuario

Brother

Brother P-touch Extra PT-320 Manual de usuario

Brother

Brother P-Touch PT-530 Manual de usuario

Brother

Brother QL 650TD - P-Touch B/W Direct Thermal... Manual de instrucciones

Brother

Brother P-touch PT-1500PC Manual de usuario

Brother

Brother PT 1950 - P-Touch 1950 B/W Thermal Transfer... Manual de usuario

Brother

Brother P-TOUCH 55 Manual de usuario

Brother

Brother PT7100 - P-Touch B/W Thermal Transfer... Guía de inicio rápido

Brother

Brother P-Touch PT-12 Manual de usuario

Brother

Brother QL 570 - P-Touch B/W Direct Thermal Printer Manual de usuario

Brother

Brother andtrade; QL-570VM Manual de usuario

Brother

Brother QL-810W Manual de usuario

Brother

Brother PT 1400 - P-Touch 1400 Two-color Thermal Transfer... Manual de usuario

Brother

Brother SC-2000 Manual de usuario

Brother

Brother P-touch PT-18R Manual de usuario

Manuales populares de Etiquetadora de otras marcas

newell

newell Dymo LabelManager 210D Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario

Novexx Solutions

Novexx Solutions XLP 604 Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Dymo

Dymo LabelManager 420P Manual de usuario

Epson

Epson LW-PX400 Manual de usuario