Brocade Communications Systems DCX 8510-8 Guía rápida de usuario

53-1002180-03

28 July 2011

Brocade DCX 8510-8

Backbone

Hardware Reference Manual

Brocade, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, IronPoint, IronShield, IronView, IronWare, JetCore, NetIron,

SecureIron, ServerIron, StorageX, and TurboIron are registered trademarks, and DCFM, Extraordinary Networks, and SAN Health

are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. All other brands,

products, or service names are or may be trademarks or service marks of, and are used to identify, products or services of their

respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning

any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to

this document at any time, without notice, and assumes no responsibility for its use. This informational document describes

features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.

Export of technical data contained in this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with

respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that

accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other

open source license agreements. To find out which open source software is included in Brocade products, view the licensing

terms applicable to the open source software, and obtain a copy of the programming source code, please visit

http://www.brocade.com/support/oscd.

Brocade Communications Systems, Incorporated

Document History

Corporate and Latin American Headquarters

Brocade Communications Systems, Inc.

130 Holger Way

San Jose, CA 95134

Tel: 1-408-333-8000

Fax: 1-408-333-8101

E-mail: inf[email protected]

Asia-Pacific Headquarters

Brocade Communications Systems China HK, Ltd.

No. 1 Guanghua Road

Chao Yang District

Units 2718 and 2818

Beijing 100020, China

Tel: +8610 6588 8888

Fax: +8610 6588 9999

E-mail: [email protected]

European Headquarters

Brocade Communications Switzerland Sàrl

Centre Swissair

Tour B - 4ème étage

29, Route de l'Aéroport

Case Postale 105

CH-1215 Genève 15

Switzerland

Tel: +41 22 799 5640

Fax: +41 22 799 5641

E-mail: emea-info@brocade.com

Asia-Pacific Headquarters

Brocade Communications Systems Co., Ltd. (Shenzhen WFOE)

Citic Plaza

No. 233 Tian He Road North

Unit 1308 – 13th Floor

Guangzhou, China

Tel: +8620 3891 2000

Fax: +8620 3891 2111

E-mail: [email protected]

Title Publication number Summary of changes Date

Brocade DCX 8510-8 Backbone

Hardware Reference Manual

53-1002180-01 New document. April 2011

Brocade DCX 8510-8 Backbone

Hardware Reference Manual

53-1002180-02 Updated filler panel

graphics, CP replacement

procedures for 7.0, and data

transmission ranges info.

June 2011

Brocade DCX 8510-8 Backbone

Hardware Reference Manual

53-1002180-03 Updated power supply

requirements data, power

supply replacement

information, ISL trunking

totals, inter-chassis link

information.

July 2011

Brocade DCX 8510-8 Backbone Hardware Reference Manual iii

53-1002180-03

Contents

About This Document

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

What’s new in this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Text formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv

Command syntax conventions . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Command examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Notes, cautions, and warnings . . . . . . . . . . . . . . . . . . . . . . . . . . xv

Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

Brocade resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

Other industry resources. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvii

Getting technical help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xvii

ESD precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Safety notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Document feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xviii

Chapter 1 Overview

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brocade DCX 8510-8 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Brocade DCX 8510-8 hardware components . . . . . . . . . . . . . . . . . . . 2

Port side of the Brocade DCX 8510-8 . . . . . . . . . . . . . . . . . . . . . 3

Nonport side of the Brocade DCX 8510-8 . . . . . . . . . . . . . . . . . . 4

Brocade DCX 8510-8 blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

High availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Serviceability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Software features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Network manageability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

iv Brocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-03

Chapter 2 Installation of the Brocade DCX 8510-8

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Time and items required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Preparing for Brocade DCX 8510-8 installation . . . . . . . . . . . . . . . . 12

Unpacking and installing the Brocade DCX 8510-8 . . . . . . . . . . . . . 14

Items included with the Brocade DCX 8510-8 . . . . . . . . . . . . . . . . . 15

Providing power to the Brocade DCX 8510-8 . . . . . . . . . . . . . . . . . .15

Port numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chassis slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Managing cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

High density cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Installing QSFP cables (optional) . . . . . . . . . . . . . . . . . . . . . . . . 19

Chapter 3 Logging In and Configuring the Brocade DCX 8510-8

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Configuring the Brocade DCX 8510-8 . . . . . . . . . . . . . . . . . . . . . . . . 21

Establishing a serial connection to the Brocade DCX 8510-8 . . . . .23

Logging in to the serial console port . . . . . . . . . . . . . . . . . . . . . . . . . 24

Configuring the IP addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Logging off the serial console port and disconnecting the

serial cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Establishing an Ethernet connection to the Brocade DCX 8510-8 .25

Customizing a switch name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Customizing a chassis name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Setting the domain ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting the date and time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting the date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting the time zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Synchronizing local time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Verifying the PID mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Determining installed software licenses . . . . . . . . . . . . . . . . . . . . . .29

Installing transceivers and attaching cables. . . . . . . . . . . . . . . . . . . 30

Managing cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Verifying correct operation and backing up the configuration . . . . . 33

Powering off the Brocade DCX 8510-8 . . . . . . . . . . . . . . . . . . . . . . .34

Chapter 4 Monitoring System Components

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Monitoring overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Brocade DCX 8510-8 Backbone Hardware Reference Manual v

53-1002180-03

Determining the status of a port or application blade . . . . . . . . . . .42

Blade illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Determining the status of a control processor blade (CP8). . . . . . .50

Determining the status of a core switch blade (CR16-8) . . . . . . . . . 51

Determining the status of a power supply. . . . . . . . . . . . . . . . . . . . .53

Determining the status of a blower assembly. . . . . . . . . . . . . . . . . . 54

Determining the status of a WWN card . . . . . . . . . . . . . . . . . . . . . . .56

Chapter 5 Removal and Replacement Procedures

In this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Chassis door removal and replacement . . . . . . . . . . . . . . . . . . . . . . 59

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Removing a chassis door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Replacing a chassis door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Cable management comb removal and replacement . . . . . . . . . . . 60

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Removing a cable management comb. . . . . . . . . . . . . . . . . . . . 61

Replacing a cable management comb. . . . . . . . . . . . . . . . . . . .62

Port, application, and encryption blade removal and

replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Removing a blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Replacing a blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Blade filler panel removal and replacement. . . . . . . . . . . . . . . . . . .65

Removing a filler panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Replacing a filler panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Control processor blade (CP8) removal and replacement . . . . . . . . 67

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Faulty CP blade indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Recording critical Brocade DCX 8510-8 information. . . . . . . . . 68

Removing a control processor blade (CP8) . . . . . . . . . . . . . . . . 70

Replacing a control processor blade (CP8) . . . . . . . . . . . . . . . . 71

Verifying operation of the new CP blade. . . . . . . . . . . . . . . . . . .72

Complete the replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Core switch blade (CR16-8) removal and replacement . . . . . . . . . .79

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Faulty core switch blade indicators . . . . . . . . . . . . . . . . . . . . . . 80

Removing a core switch blade (CR16-8) . . . . . . . . . . . . . . . . . . 80

Replacing a core switch blade (CR16-8) . . . . . . . . . . . . . . . . . . 81

Power supply removal and replacement . . . . . . . . . . . . . . . . . . . . . . 82

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Identifying power supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Removing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Replacing a power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

vi Brocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-03

Blower assembly removal and replacement . . . . . . . . . . . . . . . . . . .85

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Removing a blower assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Replacing a blower assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

WWN card removal and replacement . . . . . . . . . . . . . . . . . . . . . . . .86

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Verifying the need for replacement . . . . . . . . . . . . . . . . . . . . . . 87

Determining the status of a WWN card . . . . . . . . . . . . . . . . . . . 87

Removing the WWN card and WWN bezel (logo plate) . . . . . . .88

Replacing the WWN card and WWN bezel (logo plate) . . . . . . . 90

Transceiver removal and replacement . . . . . . . . . . . . . . . . . . . . . . . 91

Removing an SFP+ transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . 92

Replacing an SFP+ transceiver . . . . . . . . . . . . . . . . . . . . . . . . . .93

Removing and replacing an mSFP optical transceiver . . . . . . . 93

Inter-chassis link (QSFP) cable removal and replacement. . . . . . . .95

Time and items Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Removing an ICL cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Replacing an ICL cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Possible ICL configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Brocade DCX 8510-8 chassis removal and replacement. . . . . . . . .99

Time and items required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Faulty Brocade DCX 8510-8 chassis indicators. . . . . . . . . . . . . 99

Recording critical Brocade DCX 8510-8 and SAN

information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Disconnecting from network and fabric . . . . . . . . . . . . . . . . . .103

Removing components from the chassis . . . . . . . . . . . . . . . . .104

Installing the replacement chassis. . . . . . . . . . . . . . . . . . . . . .105

Installing components into the new chassis . . . . . . . . . . . . . .105

Downloading the configuration. . . . . . . . . . . . . . . . . . . . . . . . .106

Verifying correct operation of system . . . . . . . . . . . . . . . . . . . . 107

Reconnecting the system to the network and fabric. . . . . . . .108

Verifying correct configuration of the fabric. . . . . . . . . . . . . . .109

Cable routing table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Appendix A Specifications

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

General specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

System architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

System size and weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

System blade and FRU weights . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Facility requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Fibre Channel port specifications . . . . . . . . . . . . . . . . . . . . . . . . . .117

Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Brocade DCX 8510-8 Backbone Hardware Reference Manual vii

53-1002180-03

Power cords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Power-cord notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Power-cord notice (Japan, Denan) . . . . . . . . . . . . . . . . . . . . . .122

Data transmission ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Qualified cables for the FC8-64 port blade. . . . . . . . . . . . . . . . . . .123

Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

FCC warning (US only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

KCC statement (Republic of Korea) . . . . . . . . . . . . . . . . . . . . .125

VCCI statement (Japan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

BSMI statement (Taiwan) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

CE statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

Canadian requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

German statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

Laser compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

Regulatory compliance standards . . . . . . . . . . . . . . . . . . . . . .126

Environmental regulation compliance . . . . . . . . . . . . . . . . . . . . . . .127

China RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Appendix B Application and Encryption Blades

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

FS8-18 blade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

FX8-24 blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Appendix C Diagnostics and Troubleshooting

In this appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

Obtaining chassis and component status. . . . . . . . . . . . . . . . . . . .136

Interpreting POST and boot results . . . . . . . . . . . . . . . . . . . . . . . . .136

POST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136

Boot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

Appendix D Port Numbering Template

Index

viii Brocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-03

Brocade DCX 8510-8 Backbone Hardware Reference Manual ix

53-1002180-03

Figures

Figure 1 Port side of the Brocade DCX 8510-8 (sample configuration) . . . . . . . . . . . . . . . 4

Figure 2 Nonport side of the Brocade DCX 8510-8 (sample configuration) . . . . . . . . . . . . 5

Figure 3 Cable design for the mSFP patch cables for the FC8-64 high density

port blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Figure 4 Configuration tasks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Figure 5 FC8-64 Port blade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Figure 6 FC16-32 Port blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Figure 7 FC16-48 Port blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Figure 8 FS8-18 Encryption blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Figure 9 FX8-24 Extension blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Figure 10 Control processor blade (CP8). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Figure 11 Core switch blade (CR16-8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Figure 12 Power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Figure 13 Blower assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Figure 14 WWN bezel (logo plate) with LEDs for DCX and DCX 8510-8 . . . . . . . . . . . . . . . 57

Figure 15 Removal and replacement of the chassis door . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Figure 16 Removal and replacement of the cable management comb . . . . . . . . . . . . . . . 61

Figure 17 Removal and replacement of the port, application, and encryption blades

(FC16-48 port blade shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Figure 18 Removal and replacement of the blade filler panel. . . . . . . . . . . . . . . . . . . . . . . 66

Figure 19 Removal and replacement of the control processor blade (CP8) . . . . . . . . . . . . 71

Figure 20 Removal and replacement of the core switch blade (CR16). . . . . . . . . . . . . . . . 81

Figure 21 Power supply identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Figure 22 Removal and replacement of the power supply. . . . . . . . . . . . . . . . . . . . . . . . . . 84

Figure 23 Removal and replacement of the blower assembly . . . . . . . . . . . . . . . . . . . . . . . 86

Figure 24 WWN bezel (logo plate) with LEDs for DCX and DCX 8510-8 . . . . . . . . . . . . . . . 88

Figure 25 Removal and replacement of the WWN bezel (logo plate) and WWN card . . . . 90

Figure 26 Optical transceiver (SFP+) extraction tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Figure 27 Replacing an optical transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Figure 28 Replacing a 16 Gbps SFP+ optical transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Figure 29 Optical mSFP transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Figure 30 QSFP cable and transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Figure 31 QSFP transceiver (bail open) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Figure 32 QSFP cable connections – 8510 sample configuration - parallel type. . . . . . . . 98

Figure 33 FC8-64 port blade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Figure 34 FC16-32 port blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

xBrocade DCX 8510-8 Backbone Hardware Reference Manual

53-1002180-03

Figure 35 FC16-48 port blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Figure 36 FS8-18 encryption blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Figure 37 FX8-24 extension blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Otros manuales para DCX 8510-8

Tabla de contenidos

Otros manuales de Cambiar de Brocade Communications Systems