Brocade Communications Systems 7800 Manual

53-1001350-08

08 May 2015

Brocade 7800 Extension

Switch

Hardware Installation Guide

ADX, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric OS, HyperEdge, ICX, MLX, MyBrocade, OpenScript, The Effortless

Network, VCS, VDX, Vplane, and Vyatta are registered trademarks, and Fabric Vision and vADX are trademarks of Brocade

Communications Systems, Inc., in the United States and/or in other countries. Other brands, products, or service names mentioned may be

trademarks of others.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning any

equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to this document

at any time, without notice, and assumes no responsibility for its use. This informational document describes features that may not be

currently available. Contact a Brocade sales office for information on feature and product availability. Export of technical data contained in

this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. assume no liability or responsibility to any person or entity with respect to the

accuracy of this document or any loss, cost, liability, or damages arising from the information contained herein or the computer programs that

accompany it.

The product described by this document may contain open source software covered by the GNU General Public License or other open

source license agreements. To find out which open source software is included in Brocade products, view the licensing terms applicable to

the open source software, and obtain a copy of the programming source code, please visit http://www.brocade.com/support/oscd.

Contents

Preface.....................................................................................................................................5

Document conventions......................................................................................5

Text formatting conventions.................................................................. 5

Command syntax conventions.............................................................. 5

Notes, cautions, and warnings.............................................................. 6

Brocade resources............................................................................................ 7

Contacting Brocade Technical Support.............................................................7

Document feedback.......................................................................................... 8

About this document.................................................................................................................9

Supported hardware and software.................................................................... 9

What’s new in this document............................................................................ 9

Introducing the Brocade 7800 Extension Switch......................................................................11

Overview of Brocade 7800 Extension Switch................................................. 11

Brocade 7800 Features.......................................................................12

Facility requirements....................................................................................... 13

Port side of the Brocade 7800.........................................................................14

Nonport side of the Brocade 7800.................................................................. 15

Brocade 7800 management............................................................................16

Installing and configuring the Brocade 7800........................................................................... 19

Installation and safety considerations............................................................. 19

Installation Precautions................................................................................... 20

General precautions............................................................................20

Power precautions.............................................................................. 20

RTC battery precautions..................................................................... 21

Physical security ................................................................................ 21

Items included with the Brocade 7800 Extension Switch................................21

Setting up the Brocade 7800 Extension Switch as a standalone unit............. 22

Installing in an EIA rack...................................................................................22

Initial setup of the Brocade 7800.....................................................................22

Providing power to the switch............................................................. 23

Creating a serial connection................................................................23

Connecting to the Brocade 7800 using the serial connection............. 24

Setting the switch IP address..............................................................25

Changing the switch name and chassis name....................................25

Creating an Ethernet connection.........................................................26

Setting the Brocade 7800 domain ID.................................................. 26

Setting the Brocade 7800 date and time.............................................26

Synchronizing local time with an external source............................... 27

Correcting the time zone of a Brocade 7800.......................................27

FCIP and Fibre Channel routing services configuration......................28

Installing SFPs and cabling the Brocade 7800................................... 28

Verifying correct operation and backup the configuration................... 29

Recommendations for cable management..................................................... 31

Brocade 7800 Extension Switch Hardware Installation Guide 3

53-1001350-08

Operating the Brocade 7800 Extension Switch...................................................................... 33

LED activity................................................................................................... 33

LEDs on the port side of the Extension Switch................................. 33

LEDs on the nonport side of the Brocade 7800................................ 37

POST and boot specifications.......................................................................37

POST................................................................................................ 37

Boot...................................................................................................38

Interpreting POST results..............................................................................38

Brocade 7800 maintenance.......................................................................... 38

Diagnostic tests.................................................................................38

Field replaceable units (FRUs)..........................................................39

Powering off the switch................................................................................. 40

Removal and Replacement of Combined Power Supply and Fan Assembly (Port-side Air

Exhaust).......................................................................................................................... 41

Before beginning installation.........................................................................41

Installing a combined power supply and fan assembly FRU........................ 41

Time required....................................................................................42

Items required................................................................................... 42

Replacing the power supply/fan assembly........................................42

Brocade 7800 Extension Switch Technical Specifications......................................................45

Regulatory statements.......................................................................................................... 53

BSMI statement (Taiwan)..............................................................................53

Canadian requirements.................................................................................53

China CC statement......................................................................................54

CE Statement................................................................................................54

FCC warning (US only)................................................................................. 55

KCC statement (Republic of Korea)..............................................................55

VCCI statement.............................................................................................55

Cautions and Danger Notices................................................................................................57

Cautions........................................................................................................57

Danger Notices............................................................................................. 59

4Brocade 7800 Extension Switch Hardware Installation Guide

53-1001350-08

Preface

● Document conventions......................................................................................................5

● Brocade resources............................................................................................................ 7

● Contacting Brocade Technical Support.............................................................................7

● Document feedback.......................................................................................................... 8

Document conventions

The document conventions describe text formatting conventions, command syntax conventions, and

important notice formats used in Brocade technical documentation.

Text formatting conventions

Text formatting conventions such as boldface, italic, or Courier font may be used in the flow of the text

to highlight specific words or phrases.

Format Description

bold text Identifies command names

Identifies keywords and operands

Identifies the names of user-manipulated GUI elements

Identifies text to enter at the GUI

italic text Identifies emphasis

Identifies variables

Identifies document titles

Courier font Identifies CLI output

Identifies command syntax examples

Command syntax conventions

Bold and italic text identify command syntax components. Delimiters and operators define groupings of

parameters and their logical relationships.

Convention Description

bold text Identifies command names, keywords, and command options.

italic text Identifies a variable.

value In Fibre Channel products, a fixed value provided as input to a command

option is printed in plain text, for example, --show WWN.

Brocade 7800 Extension Switch Hardware Installation Guide 5

53-1001350-08

Convention Description

[ ] Syntax components displayed within square brackets are optional.

Default responses to system prompts are enclosed in square brackets.

{ x | y | z } A choice of required parameters is enclosed in curly brackets separated by

vertical bars. You must select one of the options.

In Fibre Channel products, square brackets may be used instead for this

purpose.

x | yA vertical bar separates mutually exclusive elements.

< > Nonprinting characters, for example, passwords, are enclosed in angle

brackets.

... Repeat the previous element, for example, member[member...].

\Indicates a “soft” line break in command examples. If a backslash separates

two lines of a command input, enter the entire command at the prompt without

the backslash.

Notes, cautions, and warnings

Notes, cautions, and warning statements may be used in this document. They are listed in the order of

increasing severity of potential hazards.

NOTE

A Note provides a tip, guidance, or advice, emphasizes important information, or provides a reference

to related information.

ATTENTION

An Attention statement indicates a stronger note, for example, to alert you when traffic might be

interrupted or the device might reboot.

CAUTION

A Caution statement alerts you to situations that can be potentially hazardous to you or cause

damage to hardware, firmware, software, or data.

DANGER

A Danger statement indicates conditions or situations that can be potentially lethal or

extremely hazardous to you. Safety labels are also attached directly to products to warn of

these conditions or situations.

Notes, cautions, and warnings

6 Brocade 7800 Extension Switch Hardware Installation Guide

53-1001350-08

Brocade resources

Visit the Brocade website to locate related documentation for your product and additional Brocade

resources.

You can download additional publications supporting your product at www.brocade.com. Select the

Brocade Products tab to locate your product, then click the Brocade product name or image to open the

individual product page. The user manuals are available in the resources module at the bottom of the

page under the Documentation category.

To get up-to-the-minute information on Brocade products and resources, go to MyBrocade. You can

Release notes are available on MyBrocade under Product Downloads.

White papers, online demonstrations, and data sheets are available through the Brocade website.

Contacting Brocade Technical Support

As a Brocade customer, you can contact Brocade Technical Support 24x7 online, by telephone, or by e-

mail. Brocade OEM customers contact their OEM/Solutions provider.

Brocade customers

For product support information and the latest information on contacting the Technical Assistance

Center, go to http://www.brocade.com/services-support/index.html.

If you have purchased Brocade product support directly from Brocade, use one of the following methods

to contact the Brocade Technical Assistance Center 24x7.

Online Telephone E-mail

Preferred method of contact for non-

urgent issues:

•My Cases through MyBrocade

•Software downloads and licensing

tools

•Knowledge Base

Required for Sev 1-Critical and Sev

2-High issues:

• Continental US: 1-800-752-8061

• Europe, Middle East, Africa, and

Asia Pacific: +800-AT FIBREE

(+800 28 34 27 33)

• For areas unable to access toll

free number: +1-408-333-6061

•Toll-free numbers are available in

many countries.

[email protected]

Please include:

• Problem summary

• Serial number

• Installation details

• Environment description

Brocade OEM customers

If you have purchased Brocade product support from a Brocade OEM/Solution Provider, contact your

OEM/Solution Provider for all of your product support needs.

• OEM/Solution Providers are trained and certified by Brocade to support Brocade® products.

• Brocade provides backline support for issues that cannot be resolved by the OEM/Solution Provider.

Brocade resources

Brocade 7800 Extension Switch Hardware Installation Guide 7

53-1001350-08

• Brocade Supplemental Support augments your existing OEM support contract, providing direct

access to Brocade expertise. For more information, contact Brocade or your OEM.

• For questions regarding service levels and response times, contact your OEM/Solution Provider.

Document feedback

To send feedback and report errors in the documentation you can use the feedback form posted with

the document or you can e-mail the documentation team.

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and

completeness of this document. However, if you find an error or an omission, or you think that a topic

needs further development, we want to hear from you. You can provide feedback in two ways:

• Through the online feedback form in the HTML documents posted on www.brocade.com.

• By sending your feedback to [email protected].

Provide the publication title, part number, and as much detail as possible, including the topic heading

and page number if applicable, as well as your suggestions for improvement.

Document feedback

8 Brocade 7800 Extension Switch Hardware Installation Guide

53-1001350-08

About this document

● Supported hardware and software.................................................................................... 9

● What’s new in this document............................................................................................ 9

Supported hardware and software

Although many different software and hardware configurations are tested and supported by Brocade

Communications Systems, documenting all possible configurations and scenarios is beyond the scope

of this document.

What’s new in this document

The following changes have bee made in this release of the document.

• An illustration indicating the port numbers and the port groups is added.

• A new chapter on removal and replacement of power supplies and fan assemblies is added.

• All references to EIA cabinet have been changed to EIA rack since closed cabinets are not supported

by Brocade products.

• The regulatory compliance statements are moved to a new chapter/appendix.

‐The Chinese regulatory statement has been added.

‐China CCC certification has been updated from “GB17625.1-2003 or latest” to

“GB17625.1-2012 or latest”.

‐Laser compliance statement is removed.

‐The Japan VCCI statement has been updated.

‐China RoHS compliance statements are removed and a reference to the latest independent

China RoHS compliance document is added.

• A new chapter/appendix on cautions and danger notices is added with translation in multiple

languages.

Brocade 7800 Extension Switch Hardware Installation Guide 9

53-1001350-08

What’s new in this document

10 Brocade 7800 Extension Switch Hardware Installation Guide

53-1001350-08

Otros manuales para 7800

Tabla de contenidos

Otros manuales de Cambiar de Brocade Communications Systems