Brocade Communications Systems Brocade 300 Manual de servicio

53-1002744-01

14 December 2012

EZSwitchSetup

Administrator’s Guide

Supporting Brocade 300, 4100, 4900, 5000, 5100, 5300, 6505, 6510, 6520,

7800, 8000, and VA-40FC

Brocade, Brocade Assurance, the B-wing symbol, BigIron, DCX, Fabric OS, FastIron, MLX, NetIron, SAN Health, ServerIron,

TurboIron, VCS, and VDX are registered trademarks, and AnyIO, Brocade One, CloudPlex, Effortless Networking, ICX, NET Health,

OpenScript, and The Effortless Network are trademarks of Brocade Communications Systems, Inc., in the United States and/or in

other countries. Other brands, products, or service names mentioned may be trademarks of their respective owners.

Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied, concerning

any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the right to make changes to

this document at any time, without notice, and assumes no responsibility for its use. This informational document describes

features that may not be currently available. Contact a Brocade sales office for information on feature and product availability.

Export of technical data contained in this document may require an export license from the United States government.

The authors and Brocade Communications Systems, Inc. shall have no liability or responsibility to any person or entity with

respect to any loss, cost, liability, or damages arising from the information contained in this book or the computer programs that

accompany it.

The product described by this document may contain “open source” software covered by the GNU General Public License or other

open source license agreements. To find out which open source software is included in Brocade products, view the licensing

terms applicable to the open source software, and obtain a copy of the programming source code, please visit

http://www.brocade.com/support/oscd.

Brocade Communications Systems, Incorporated

Document History

Corporate and Latin American Headquarters

Brocade Communications Systems, Inc.

130 Holger Way

San Jose, CA 95134

Tel: 1-408-333-8000

Fax: 1-408-333-8101

E-mail: info@brocade.com

Asia-Pacific Headquarters

Brocade Communications Systems China HK, Ltd.

No. 1 Guanghua Road

Chao Yang District

Units 2718 and 2818

Beijing 100020, China

Tel: +8610 6588 8888

Fax: +8610 6588 9999

E-mail: [email protected]

European Headquarters

Brocade Communications Switzerland Sàrl

Centre Swissair

Tour B - 4ème étage

29, Route de l'Aéroport

Case Postale 105

CH-1215 Genève 15

Switzerland

Tel: +41 22 799 5640

Fax: +41 22 799 5641

E-mail: emea-i[email protected]

Asia-Pacific Headquarters

Brocade Communications Systems Co., Ltd. (Shenzhen WFOE)

Citic Plaza

No. 233 Tian He Road North

Unit 1308 – 13th Floor

Guangzhou, China

Tel: +8620 3891 2000

Fax: +8620 3891 2111

E-mail: [email protected]

Title Publication number Summary of changes Date

EZSwitchSetup Administrator’s Guide 53-1001344-02 Added support for the

Brocade VA-40FC.

August 2009

EZSwitchSetup Administrator’s Guide 53-1001344-03 Removed software support

statement from title page, as this

document supports multiple

Fabric OS versions.

February 2010

EZSwitchSetup Administrator’s Guide 53-1002157-01 Added support for Brocade 6510. April 2011

EZSwitchSetup Administrator’s Guide 53-1002511-01 Added support for Brocade 6505. December 2011

EZSwitchSetup Administrator’s Guide 53-1002744-01 Added support for Brocade 6520. December 2012

EZSwitchSetup Administrator’s Guide iii

53-1002744-01

Contents

About This Document

How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Supported hardware and software . . . . . . . . . . . . . . . . . . . . . . . . . . . v

What’s new in this document. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Document conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Getting technical help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

Document Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Chapter 1 Introducing EZSwitchSetup

Overview of EZSwitchSetup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

EZSwitchSetup software and hardware requirements. . . . . . . . . . . . 2

Configuring Internet Explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Supported switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Language support for EZSwitchSetup . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 2 Setting Up Your Switch

Installing and running the EZSwitchSetup wizard. . . . . . . . . . . . . . . . 7

Launching the EZSwitchSetup wizard . . . . . . . . . . . . . . . . . . . . . 8

Connecting cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Discovering the switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Confirming IP addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Switch discovery failure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Configuring the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting switch parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Zoning selection options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Configuring zones on the switch . . . . . . . . . . . . . . . . . . . . . . . . .20

Specifying devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Connecting devices and completing the setup . . . . . . . . . . . . . . . . . 21

iv EZSwitchSetup Administrator’s Guide

53-1002744-01

Chapter 3 Managing Your Switch

Switch Manager overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Task panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Switch View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Content page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Launching the EZSwitchSetup Switch Manager . . . . . . . . . . . . . . . .30

Logging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Switch Manager sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Logging out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Viewing switch information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Viewing the status indicator legend . . . . . . . . . . . . . . . . . . . . . .33

Viewing fan, temperature, and power supply status . . . . . . . . .33

Port status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Switch Information tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Port Information tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Changing switch information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Adding a port license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Managing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Device connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Assigning and renaming device aliases . . . . . . . . . . . . . . . . . . . 41

Zoning management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Viewing the zone access map. . . . . . . . . . . . . . . . . . . . . . . . . . .44

Editing the zoning configuration . . . . . . . . . . . . . . . . . . . . . . . . . 45

Validating zoning configuration. . . . . . . . . . . . . . . . . . . . . . . . . . 47

Restoring Typical Zoning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Accessing Web Tools for advanced management. . . . . . . . . . . . . . .48

Making EZSwitchSetup your default switch manager . . . . . . . . 48

Appendix A EZSwitchSetup Limitations

General limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Index

EZSwitchSetup Administrator’s Guide v

53-1002744-01

About This Document

In this chapter

•How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

•Supported hardware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

•What’s new in this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

•Document conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

•Notice to the reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

•Additional information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

•Getting technical help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

•Document Feedback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

How this document is organized

This document contains the following components:

•Chapter 1, “Introducing EZSwitchSetup”, provides basic information about the EZSwitchSetup

interface, including system requirements and installation instructions.

•Chapter 2, “Setting Up Your Switch”, describes how to set up your switch for the first time.

•Chapter 3, “Managing Your Switch”, describes how to monitor and manage your switch using

the EZSwitchSetup Switch Manager.

•Appendix A, “EZSwitchSetup Limitations”, discusses the limitations of and provides

workarounds for using EZSwitchSetup.

Supported hardware and software

In those instances in which procedures or parts of procedures documented here apply to some

switches but not to others, this guide identifies exactly which switches are supported and which are

not.

Although many different software and hardware configurations are tested and supported by

Brocade Communications Systems, Inc., documenting all possible configurations and scenarios is

beyond the scope of this document.

The following platforms are supported by this release of EZSwitchSetup:

•Brocade 300 switch

•Brocade 4100 switch

•Brocade 4900 switch

vi EZSwitchSetup Administrator’s Guide

53-1002744-01

•Brocade 5000 switch

•Brocade 5100 switch

•Brocade 5300 switch

•Brocade 6505 switch

•Brocade 6510 switch

•Brocade 6520 switch

•Brocade 7800 Extension Switch

•Brocade 8000 FCoE Switch

•Brocade VA-40FC switch

What’s new in this document

The following change has been made since this document was last released:

•Added support for the Brocade 6520 switch.

Document conventions

This section describes text formatting conventions and important notice formats used in this

document.

Text formatting

The narrative-text formatting conventions that are used in this document are as follows:

bold text Identifies command names

Identifies the names of user-manipulated GUI elements

Identifies keywords and operands

Identifies text to enter at the GUI or CLI

italic text Provides emphasis

Identifies variables

Identifies paths and Internet addresses

Identifies document titles

code text Identifies CLI output

Identifies syntax examples

For readability, command names in the narrative portions of this guide are presented in mixed

lettercase: for example, switchShow. In actual examples, command lettercase is all lowercase.

Notes, Cautions, and Warnings

The following notices and statements are used in this manual. They are listed below in order of

increasing severity of potential hazards.

EZSwitchSetup Administrator’s Guide vii

53-1002744-01

NOTE

A note provides a tip, guidance, or advice, emphasizes important information, or provides a

reference to related information.

ATTENTION

An Attention statement indicates potential damage to hardware or data.

CAUTION

A Caution statement alerts you to situations that can be potentially hazardous to you or cause

damage to hardware, firmware, software, or data.

DANGER

A Danger statement indicates conditions or situations that can be potentially lethal or extremely

hazardous to you. Safety labels are also attached directly to products to warn of these conditions

or situations.

Key terms

For definitions specific to Brocade and Fibre Channel, see the technical glossaries on MyBrocade.

See “Brocade resources” on page viii for instructions on accessing MyBrocade.

For definitions of SAN-specific terms, visit the Storage Networking Industry Association online

dictionary at:

http://www.snia.org/education/dictionary

Notice to the reader

This document may contain references to the trademarks of the following corporations. These

trademarks are the properties of their respective companies and corporations.

These references are made for informational purposes only.

Corporation Referenced Trademarks and Products

Microsoft Corporation Windows, Windows NT, Internet Explorer

Oracle Corporation Java

Netscape Communications Corporation Netscape

Red Hat, Inc. Red Hat, Red Hat Network, Maximum RPM, Linux Undercover

viii EZSwitchSetup Administrator’s Guide

53-1002744-01

Additional information

This section lists additional Brocade and industry-specific documentation that you might find

helpful.

Brocade resources

To get up-to-the-minute information, go to http://my.brocade.com to register at no cost for a user ID

and password.

White papers, online demonstrations, and data sheets are available through the Brocade website

at:

http://www.brocade.com/products-solutions/products/index.page

For additional Brocade documentation, visit the Brocade website:

http://www.brocade.com

Release notes are available on the MyBrocade website and are also bundled with the Fabric OS

firmware.

Other industry resources

For additional resource information, visit the Technical Committee T11 website. This website

provides interface standards for high-performance and mass storage applications for Fibre

Channel, storage management, and other applications:

http://www.t11.org

For information about the Fibre Channel industry, visit the Fibre Channel Industry Association

website:

http://www.fibrechannel.org

Getting technical help

Contact your switch support supplier for hardware, firmware, and software support, including

product repairs and part ordering. To expedite your call, have the following information available:

1. General Information

•Switch model

•Switch operating system version

•Browser version

•JRE version installed on host

•Error numbers and messages received

•Java console window messages

•Screen shots

•supportSave command output

EZSwitchSetup Administrator’s Guide ix

53-1002744-01

•Detailed description of the problem, switch or fabric behavior immediately following the

problem, and specific questions

•Description of any troubleshooting steps already performed and results

2. Switch Serial Number

The switch serial number and corresponding bar code are provided on the serial number label,

as shown here:

The serial number label is located as follows:

•Brocade 300, 4100, 4900, 5000, 5100, 5300, 7800, 8000, and VA-40FC switches: On

the switch ID pull-out tab located on the bottom of the port side of the switch.

•Brocade 6505, 6510, and 6520 switches: On the switch ID pull-out tab located inside the

chassis on the port side on the left.

3. World Wide Name (WWN)

•The WWN is in the same place as the serial number.

Document Feedback

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy and

completeness of this document. However, if you find an error or an omission, or you think that a

topic needs further development, we want to hear from you. Forward your feedback to:

documentation@brocade.com

Provide the title and version number of the document and as much detail as possible about your

comment, including the topic heading and page number and your suggestions for improvement.

*FT00X0054E9*

FT00X0054E9

xEZSwitchSetup Administrator’s Guide

53-1002744-01

Otros manuales para Brocade 300

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de Brocade Communications Systems