Broadata LBC-H-R-SCL-ICP Manual de usuario
LBC-H-R-SCL-ICP
LINK BRIDGETM HDBASET HDMI RECEIVER
WITH INLINE CONTROL PROCESSOR
BCI reserves the right to make changes to the products described herein without prior
notice or consent. No liability is assumed as a result of their use or application. All
rightsreserved.
©2013 Broadata Communications, Inc.
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTHDMIReceiverwithInlineControlProcessor
SAFETY INSTRUCTIONSAND COMPLIANCE DECLARATIONS
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lightning strikes, etc. Use of
surgeprotection systemsis highlyrecommended inorder toprotect andextend
the life of your equipment.
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTReceiverwithInlineControlProcessor
Broadata Technical Support, (800) 214-0222
4
TABLE OF CONTENTS
1.0 PRODUCT DESCRIPTION ..............................................5
2.0 OPERATION CONTROL AND FUNCTIONS ...................7
2.1 SCALING RECEIVER FRONT PANEL ............................7
2.2 SCALING RECEIVER REAR PANEL ...............................8
2.3 ICP FRONT AND REAR PANEL .....................................9
3.0 CONNECTOR PINOUT ASSIGNMENT .........................10
3.1 SCALING RECEIVER.....................................................10
3.1.1 IR PINASSIGNMENT ...................................................10
3.1.2 RS-232 PINASSIGNMENT...........................................11
3.2 ICP .................................................................................12
4.0 ON SCREEN DISPLAY (OSD) MENU ............................14
4.1 MAIN MENU SELECTION .............................................14
4.2 DISPLAY ........................................................................14
4.3 COLOR ..........................................................................15
4.4 AUDIO ............................................................................16
4.5 SETUP...........................................................................17
4.6 INFORMATION...............................................................18
5.0 LB-ICP WEB SERVER DESCRIPTION ........................19
6.0 SPECIFICATIONS...........................................................43
7.0 SERVICE PROCEDURE ................................................46
7.1 REPLACEMENT POLICY ..............................................46
7.2 RETURN AND REPAIR SERVICE .................................46
8.0 LIMITED WARRANTY ....................................................47
9.0 APPENDIX .....................................................................48
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTHDMIReceiverwithInlineControlProcessor
1.0 PRODUCT DESCRIPTION
Overall
•An HDBaseT HDMI video scaling receiver with multiple control
I/O ports
•Not only scale HDMI video, but also provide in-line control I/O
paths,over HDBaseT link
Scaling Receiver
•Extend HDMI, LAN and RS-232/IR up to 100 meters over 1
CAT 5e/6 Cable
•Supports input/output video scaling up to 1080p 60Hz and
1920x1200@60Hz
•High performance video scaler with OSD Menu Control
•Supports HDMI w/embedded audio and optical audio
extraction
•Provides output picture adjustment on contrast, brightness,
hue, saturation, sharpness, RGB level, and scan size
•Auto-EDID support, automatically detect the factory setting of
theconnected display
•Bi-directionalPoC
Inline Control Processor (ICP)
•Control I/O ports contain:
- two (2) RS-232
- two (2) Relay
- two (2) Digital I/O
- one (1) IR
- one (1) Ethernet
•Control and monitorAV devices using a standard Ethernet
network (Smart phone or PC) or RS-232 (keypad)
•Front panel port status indicators
•Userfriendly customizable control configurations viabuilt-in
web server
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTReceiverwithInlineControlProcessor
Broadata Technical Support, (800) 214-0222
6
Figure 1-1 shows a typical application diagram.
Figure 1-1
ORDERING INFORMATION
LBC-H-R-SCL-ICP LinkBridge HDBaseT Scaling Receiverwith
Control I/O Ports
HDMI
RS-232/IR
LAN
HDBaseT
Link
1 CAT-5/6e
NET
Keypad
LB-KP8
LBC-HDBT-T LBC-HDMI-R-SCL-ICP HDMI
RS-232/IR
LAN
RS-232
GPIO
Relay
IR
For
Control
Ethernet
RS-232
For
Extender
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTHDMIReceiverwithInlineControlProcessor
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Scaling Receiver Front Panel
1. SERVICE:
This port is reserved for firmware update only.
2.IR:
IR Receiver window (accepts the remote control signal of this
deviceonly).
3. OPTICALOUT:
Connect to an amplifier or active speaker with optical cable for
audiooutput.
4. HDMI OUT:
This slot is to connect with HDMI TV/Monitor.
5. MENU:
Press this button to enter into the OSD menu.
6. +/- :
Press these buttons to scroll up and down through the OSD
menu.
7. Enter:
Press this button to confirm the selection. Press this button
together with [–] key to switch output timing to 720p@60
instantly.Press this button together with [+] key to switch output
timing to XGA(1024x768) instantly.
1234567
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTReceiverwithInlineControlProcessor
Broadata Technical Support, (800) 214-0222
8
2.2 Scaling Receiver Rear Panel
1. Power LED:
ThisLEDwill illuminatewhenthedeviceis connectedtoapower
supply.
2. DC 24V:
Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet. Only one side of power is needed to
activate both Transmitter and Receiver when both obtain the
PoHfunction.
3. RS-232 OUT:
This slot is to connect with D-Sub 9-pin cable from device
equipment for receiving RS-232 commands. Commands are
listed inAppendix B.
4. LAN:
Connect to an active network for LAN sharing of a total
transmission rate up to 100Mbps. Or when a compatible LAN
equipped Transmitter is connected to an active network, this
allowsthenetworkaccess(includinginternet accessifavailable)
to be shared between the Transmitter and Receiver. Connect
anyEthernet equippeddevicee.g.aSmartTVorgamesconsole
to the LAN port for that device to share the network internet
access.Note: DO NOT connect LAN cable with any of the
CAT5e/6/7port.Doingsomay trigger power shut down
andruin the device
5. IR Blaster:
Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
6. IR Extender:
12
3456789
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTHDMIReceiverwithInlineControlProcessor
Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
7. MODE LED:
This LED will illuminated when the power is connected.
8. Link LED:
This LED will illuminate when the slot has been connected to
theTransmitterandtheTransmitterhasconnectedwithsources
that shows image on screen.
9. CAT5e/6 IN:
Connect to the Transmitter unit with a Single CAT5e/6/7 cable
for receiving all data signals.
2.3 ICP Front and Rear Panel
1. Digital I/O: Digital input/output ports.
2. RS-232: Serial port to control devices.
3. RELAY: Normally open and normally closed relay ports.
4. DC12V: DC power input connector.
5. IR Out: IR blaster port.
6. SW: The unit configuration dip switch
7. IR Learner: Built-in IR receiver for IR learning.
8. IR Learner LED: Lighted when the unit is IR learning mode.
9. CONFIG: Configuration/keypad port.
12
3
456
7
89
ICP/Front
ICP/Back
10 11
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTReceiverwithInlineControlProcessor
Broadata Technical Support, (800) 214-0222
10
10. LAN: Ethernetconnector.
11. RESET: Press the button to reset the device back to factory
default settings.
3.0 CONNECTOR PINOUT ASSIGNMENT
3.1 Scaling Receiver
3.1.1 IR PinAssignment
IR Blaster Power 5V
IR Blaster Signal
NC
IR Receiver
IR Signal
Power
Grounding
LBC-H-R-SCL-ICPUserManual
LinkBridgeTM HBaseTHDMIReceiverwithInlineControlProcessor
3.1.2 RS-232 PinAssignment
Baud Rate: 9600bps
Data Bit: 8 bits
Parity:None
Flow Control: None
Stop Bit: 1
Tabla de contenidos
Otros manuales de Receptor de Broadata
Broadata
Broadata LBH-H/O-EAD-R-ICP Manual de usuario
Broadata
Broadata 730E-R-ID Manual de usuario
Broadata
Broadata LBC-H/O-R-ICP Manual de usuario
Broadata
Broadata LBC-H-R-DOP Manual de usuario
Broadata
Broadata LINKBRIDGE LBC-H2V-T-5P Manual de usuario
Broadata
Broadata Link Bridge LBC-HDMI-T-WP Manual de usuario
