Bristan Quest Manual de usuario

Fitting Instructions & Contents List

Please keep these instructions for future reference and request of replacement parts

Quest/Dune Standard Toilet Seat

Contents Page

1. Introduction 03

2. Safety Note 03

3. Installation 04 - 05

4. Cleaning & Maintenance 06

5. Bristan Guarantee 07

1. Introduction

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with

your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting

instructions have been created to give you all of the information you need and, if you need any further help, please

do not hesitate to give us a call on 0844 701 6273.

2. Safety Note

Please read these instruction thoroughly and retain for future use.

All product manufactured and supplied by Bristan are safe provided they are installed correctly, used correctly and

receive regular maintenance in accordance with these instructions.

These fittings need to be installed in accordance with and meet the requirements of the Water Supply (Water

Fittings) Regulations 1999 and Scottish Byelaws 2004.

Before starting any installation please consider the following:

Prior to drilling into walls, check that there are no hidden electrical

wires, cables or water supply pipes. This can be checked with the aid of

an electronic detector.

If power tools are used do not forget to:

- Wear eye protection

- Unplug equipment after use

SAFETY

NOTE

3. Installation

Please read carefully before attempting to fit the seat. If you are not the end user, please make sure the aftercare

instructions are made available for the end user to read.

A. Basic principle of hinge mechanism (see diagram A). The hinge body assembly is inserted into the hinge

mounting holes in the rear of the seat ring/lid and then bolted to the toilet pan.

B. Adjusting the seat hinges. In order to fit the seat correctly, it is essential to adjust the seat hinges. Adjustment

can be achieved in 2 main ways.

1. Rotation of the hinge discs (see diagram B). By rotating the disc on the underside of the hinge body assembly, it

is possible to adjust the position of the fixing bolts. In addition to this rotating action, by sliding the fixing bolt

up/down the slot in the disc, it is possible to adjust the fixing bolt position further. The combined rotating/sliding

action allows a wide range of fixing positions. This is necessary in order to match the distance between the 2

holes in the toilet pan and to adjust the forward/backward position of the seal.

NOTE:- It is necessary to make sure that the hinge body assemblies are fully inserted into the hinge mounting

holes in the seat (as in diagram A). Failure to do so will result in excessive side to side movement of the seat.

Some side to side movement is perfectly normal.

2. Swapping over the hinge body assemblies (see diagram C1 and C2). It can be seen that the hinge body

assemblies are handed and that the angled bar is positioned off centre in relation to the assembly. By swapping

the hinge bodies over, it is possible to move forward (as in diagram C1) or backwards (as in diagram C2) on the

toilet pan.

C. Bolting the seat to the pan (see diagram A). It is essential that:-

1. All washers are fitting (as in diagram A). NOTE:- That the main seat washer must be fitted the correct way up.

2. The locking nuts are tightened properly. This may require the use of pliers. Failure to adequately tighten the

locking nuts may result in the seat moving around the pan - care must be taken however not over

tighten the nuts as this could either strip the thread in the nut or damage the toilet pan. After a few days

use, check that the nuts are still tight – this is necessary as the washers will slowly compress in the first few days

of use. If the seat lid or ring will not stay in the raised position then move it further on the pan.

Installation continued

4. Cleaning & Maintenance

Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces.

All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe with a soft damp

cloth. Stains can be removed using washing up liquid. All bathroom cleaning product (powders and liquids) will

damage the surface of your fitting, even the non-scratch cleaners.

NOTE:- Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric or phosphoric

acid.

We advise that your fitting is regularly serviced, particularly in hard water areas.

Bristan recommend E-Cloth for cleaning all of our bathroom & kitchen products.

Using just water, E-cloth gives a smear free, deep clean by breaking up and

holding dirt, which normal cloths leave behind. Order through your Bristan stockist.

(ORDER CODE: ECLOTH)

5. Bristan Guarantee

2 year - Pumps, Power Showers

2 year parts. 1 year labour (subject to registration).

Electric Showers/Instantaneous Water Heaters

2 year parts. 1 year labour (subject to registration).

5 year -Taps and Mixers

5 year parts and 1 year labour (subject to proof of purchase).

Shower Valves

5 year parts. 5 year labour (subject to registration), else 1 year with proof of purchase.

Accessories

5 year parts only. Includes bathrooms accessories, shower accessories (e.g. hoses, handsets and

poles), wastes, WC levers and light pulls.

10 year -Shower enclosures, Shower Trays, Sanitary Ware & Furniture

10 year parts (subject to registration), else 2 years with proof of purchase. 1 year labour (subject

to registration), else 1 year with proof of purchase.

This guarantee applies to products purchased within the United Kingdom or Republic of Ireland, but does not apply

to products used commercially.

The guarantee is only available to original purchasers who have proof of purchase.

The installation must allow ready access to all products for the purpose of inspection, maintenance or replacement.

Any part found to be defective during the above guarantee period will be replaced without charge, providing that the

product has been installed in accordance with the instructions, used as intended, and regularly serviced.

Servicing should be carried out at regular intervals of no more than 12 months and more frequently in hard water

areas (heavy lime scale) areas.

In the unlikely event that any problems are encountered with the product’s performance on installation, you must

obtain guidance/authorisation from our Customer Service Department, and be able to supply proof and date of

purchase, before any remedial action is taken.

The guarantee excludes general wear and tear and damage caused by accident, misuse or neglect, and does not

cover the following:

Components that are subject to general wear and tear such as filters, seals, ‘O’ rings and washers etc.

· Damage caused by faulty installation

· Damage caused by lime scale or any waterborne debris

· Damage caused by inappropriate cleaning products (see user instructions)

· Damage caused by the use of non-Bristan parts

· The product being used for a purpose other than intended by the manufacturer.

In the interests of continuous product improvement Bristan reserves the right to alter specification as necessary.

This booklet covers all product codes

SW QST SEAT SH W

SW DN SEAT SH W

Helpline

0844 701 6273

Bristan Group Limited

Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG

A Masco Company

Website: www.bristan.com

Telephone: 0844 7016 274 Facsimile: 0844 701 6275

Email: [email protected]

FI (SW QST/DN SEAT SH) – REV. D2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Producto de plomería de Bristan

Bristan

Bristan HY POWSHX W Instrucciones de montaje

Bristan

Bristan CRAZE CRZ2 SHXDIVCTFF C Diagrama de cableado

Bristan

Bristan Regency Luxury R BSM C Diagrama de cableado

Bristan

Bristan CR SHXDIVFF C Diagrama de cableado

Bristan

Bristan W BASIN08 C Manual de usuario

Bristan

Bristan QST BSM C (D5) Diagrama de cableado

Bristan

Bristan Jute JU BSM C Manual de usuario

Bristan

Bristan Value VAL BSM C CD Diagrama de cableado

Bristan

Bristan Quest Deck Sink Mixer Diagrama de cableado

Bristan

Bristan Quest Easyfit Diagrama de cableado

Bristan

Bristan Quest QST BF C Manual de usuario

Bristan

Bristan IRN R001 Manual de usuario

Bristan

Bristan VR1000 Manual de usuario

Bristan

Bristan Regency R BSM C Manual de usuario

Bristan

Bristan W BATH05 C Diagrama de cableado

Bristan

Bristan DSC SHCDIV C (D7) Diagrama de cableado

Bristan

Bristan WMNT11 C Instrucciones de montaje

Bristan

Bristan Joy ThermoSafe Series Instrucciones de montaje

Bristan

Bristan EF KIT PK Diagrama de cableado

Bristan

Bristan CRZ SHXDIVCTFF BLK (D1) Diagrama de cableado

Bristan

Bristan Z2 SQR 1/2 C Diagrama de cableado

Bristan

Bristan CAP2 SHUAR C Instrucciones de montaje

Bristan

Bristan Jute JU BF C Manual de usuario

Bristan

Bristan W SNK6 C Manual de usuario

Manuales populares de Producto de plomería de otras marcas

Weka

Weka 506.2020.00E Instrucciones de funcionamiento

Kohler

Kohler K-6228 Instrucciones de montaje

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manual de usuario

American Standard

American Standard DetectLink 6072121 Manual de usuario

Uponor

Uponor Contec TS Manual de usuario

Pfister

Pfister Selia 49-SL Manual de usuario

Fortis

Fortis VITRINA 6068700 Manual de usuario

Fortis

Fortis MILANO 78211JS Manual de usuario

Kohler

Kohler K-12183 Instrucciones de montaje

Maxxus

Maxxus MX-M206-01 Manual de usuario

Moen

Moen 5922 Series Manual de usuario

Viega

Viega Prevista Pure 8512 Manual de usuario

Kohler

Kohler Centerset K-15240 Instrucciones de montaje

Viega

Viega Prevista Dry 8522.33 Manual de usuario

Sanela

Sanela Lema SLP 59RB Manual de usuario

Elkay

Elkay EDF15AC Manual de instalación

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manual

baliv

baliv WT-140 Manual de usuario