Bristan Capri Manual de usuario

Installation Instructions

and User Guide

Sonique, Capri & Acute

Thermostatic Surface

Mounted Mini Shower

Valves

Models covered:

Models covered:Models covered:

Models covered: SOQ SHXAR C,

CAP SHXAR C & AE SHXAR C

Please keep this booklet for future

Reference.

Installer, when you have read these

instructions please ensure you leave them

with the user.

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have

designed this product with your enjoyment in mind. To ensure that it works to its

full potential, it needs to be fitted correctly. These fitting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to give us a call on 0844 701 6 73.

Important Safety Information ………………………………………………………….

General Information ………………………………………………………………………..

Product Features …………………………………………………………………………….

Specifications …………………………………………………...................................

Dimensions ………………………………………………………................................

Pack Contents ………………………………………………………………………………..

Installation Requirements ……………………………………….........................

Flow Regulators ………………………………………………………………………........

9-1

Flow Regulators ………………………………………………………………………........

Prior to Installation …………………………………………………………………………

Installation ……………………………………………………………………….................

Shower Valve………………………………………………………………………………..

Riser Rail …………………………………………………………………………………….

Operation ……………..........………………………………………………………………….

Commissioning ……………………………....………………………………………………

Maintenance …………………………….....………………………………………………….

Map of Hard Water Regions in the UK ……………………..........................

Troubleshooting ……………………………………........………………………………….

Notes ……………………………………………………………………………………………….

Guarantee ……………………………………............……………………………………….

Service Policy ………………………………..............……………………………………..

16- 0

16-17

18- 0

3- 4

6- 7

8- 9

30-31

2Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

• Please read these instructions thoroughly and retain for future use.

• All products manufactured and supplied by Bristan are safe provided they are installed,

used correctly and receive regular maintenance in accordance with these instructions.

• If you are in any doubt about your ability to install this product safely you must

If you are in any doubt about your ability to install this product safely you must If you are in any doubt about your ability to install this product safely you must

If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualified plumber.

employ the services of an experienced qualified plumber. employ the services of an experienced qualified plumber.

employ the services of an experienced qualified plumber.

• Do not use if the showerhead or shower hose has been damaged or is blocked.

• Do not crush or kink the shower hose, this could damage the hose and cause leaks.

• Remove all packaging and check the components for damage before starting

installation.

• Warning:

Warning: Warning:

Warning: Before starting any installation please consider the following: Prior to

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

• If power tools are used do not forget to: - Wear eye protection

Unplug equipment after use

Important Safety Information

Unplug equipment after use

•The fitting of isolating valves is required as close as is practical to the supply inlet

feeds of the thermostatic mixing valve.

•Warning:

Warning: Warning:

Warning: Before installing the new shower valve it is essential that you

thoroughly flush through the pipework in order to remove any remaining swarf, solder,

etc. Failure to carry out this procedure could cause problems or damage to the

workings of the shower valve.

• This product must not

must not must not

must not be modified in any way as this will invalidate the guarantee.

Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

General Information

This product has been tested to comply with the BS EN 1 87:1999 (LP) and BS EN

1111:1999 (HP) thermostatic mixing valve standards.

BS6700 recommends the temperature of stored water should never exceed 65ºC. A

stored water temperature of 60ºC is considered sufficient to meet all normal

requirements and will minimise the build up of lime scale in hard water areas (see Map

of Hard Water Regions in the UK on page 5).

If the fitting is installed at low pressure (tank fed), then the minimum distance from the

highest installed position of the showerhead to the underside of the cold tank should be

at least 1 metre to ensure adequate performance.

Note:

Note: Note:

Note: Nominally equal (balanced) inlet supply pressures are recommended for optimum

performance with mixer showers.

This shower valve should be installed in compliance with the Water Supply (Water

Fittings) Regulations 1999 and the Scottish Byelaws 004.

If in doubt, contact a registered plumber or you Local Water Authority or the Secretary of

The Institute of Plumbing, address as follows;-

The Institute of Plumbing,

64 Station Lane,

Hornchirch,

Essex, RM1 6NB

Tel: 01708 47 791

Light

Commercial

Heavy

Commercial

Health Care

Recommended Usage

Recommended UsageRecommended Usage

Recommended Usage

Domestic

Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

Product Features

On/Off and Temperature Control

On/Off and Temperature ControlOn/Off and Temperature Control

On/Off and Temperature Control

Turn the control anti-clockwise

to turn the shower on and increase

the temperature.

Turn the control clockwise to

decrease the temperature and

to turn the shower off.

Sonique shower valve shown

Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

Specifications

Inlet Connections:

Inlet Connections: Inlet Connections:

Inlet Connections: 15mm compression, with adjustable centres.

Operating Pressure Range:

Operating Pressure Range: Operating Pressure Range:

Operating Pressure Range: Min: 0.1 bar – Max: 5.0 bar – Maximum recommended

imbalance between hot and cold supply should not exceed a ratio of 5:1.

Maximum Static Pressure:

Maximum Static Pressure: Maximum Static Pressure:

Maximum Static Pressure: 10.0 bar

Maximum Outlet Temperature:

Maximum Outlet Temperature: Maximum Outlet Temperature:

Maximum Outlet Temperature: Factory pre-set to 41ºC (can be re-set to suit site

conditions).

Supply Requirements:

Supply Requirements:Supply Requirements:

Supply Requirements:

Minimum cold water supply temperature: 5ºC.

Maximum cold water supply temperature: 5ºC.

Maximum hot water supply temperature: 80ºC.

(a maximum hot water supply temperature of 60 – 65ºC is recommended for ablutionary

purposes).

Note:

Note: Note:

Note: The inlet hot water temperature must be at least 10ºC above the required blend

temperature (e.g. shower temperature 43ºC: minimum hot supply 53ºC.

6Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

Dimensions (mm’s)

660

117 74

110 – 155

Centres

Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

*Note:

*Note:*Note:

*Note: The riser rail wall brackets can be

positioned up or down the riser rail (max.

600mm apart) as required. This allows any

existing holes to be reused or covered by

the wall brackets. The brackets can also

be adjusted to sit in the middle of the tiles

or in the tile joints.

113 93

Pack Contents

1 Shower Valve

Long elbows x

3 Covers x

4 Filters x (Pre-fitted)

5 Green flow regulator (Pre-fitted)

6 Yellow flow regulator (Pre-fitted)

7 Hexagonal key

8 Backplate fixings x

9 Showerhead (single function)

10 Sealing washers x

Shower

hose

Shower

hose

1 Riser rail

13 Riser rail fixings x4

8Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

Installation Requirements

This shower valve must be installed in

compliance with current water regulations.

If you have any doubts about the water

regulation requirements contact your local

water services provider or use the services

of a professional plumber.

This shower valve is suitable for use with

the following water supply systems.

•Gravity Fed Hot and Cold

Gravity Fed Hot and ColdGravity Fed Hot and Cold

Gravity Fed Hot and Cold

(pressure Balanced)

•Gravity Fed Hot and Mains Cold

Gravity Fed Hot and Mains ColdGravity Fed Hot and Mains Cold

Gravity Fed Hot and Mains Cold

(differential pressure – see Specification

section on page 6.

•Instantaneous Water Heater

Instantaneous Water HeaterInstantaneous Water Heater

Instantaneous Water Heater

(combination boiler)

•Unvented System

Unvented SystemUnvented System

Unvented System

•Pumped System

Pumped SystemPumped System

Pumped System

Important:

Important: Important:

Important: If you install this shower

valve with a gravity fed system, there must

be a minimum head (vertical distance)

from the underside of the cold water

storage tank to the showerhead position of

at least 1 metre.

Note: Pumped system (with Essex

Note: Pumped system (with Essex Note: Pumped system (with Essex

Note: Pumped system (with Essex

flange)

flange) flange)

flange) If you install this shower valve to a

pumped gravity fed system where the

minimum head (vertical distance) from the

underside of the cold water storage tank to

the top of the hot water cylinder is less

than 1 metre we recommend an Essex

flange is used as shown on page 10.

Flushing Pipework

Flushing PipeworkFlushing Pipework

Flushing Pipework

Important:

Important: Important:

Important: Before connecting the

shower valve (see Installation on pages 16-

17), supply pipework must

must must

must be flushed to

clear debris before connecting the shower

valve. Debris will reduce the performance

Gravity Fed Hot and Cold

Gravity Fed Hot and ColdGravity Fed Hot and Cold

Gravity Fed Hot and Cold

valve. Debris will reduce the performance

and life of the shower.

Gravity Fed Hot and Mains Cold

Gravity Fed Hot and Mains ColdGravity Fed Hot and Mains Cold

Gravity Fed Hot and Mains Cold

Cold mains supply Cold mains supply

1m min

min

Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

Installation Requirements

Instantaneous Water Heater

Instantaneous Water HeaterInstantaneous Water Heater

Instantaneous Water Heater Unvented System

Unvented SystemUnvented System

Unvented System

Cold mains supply Cold mains supply

Pumped System

Pumped SystemPumped System

Pumped System Pumped System

Pumped System (with Essex flange)

Key:

Key:Key:

Key: Isolating Reducing Shower Pump Essex

Valve Valve Valve Flange

Cold mains supply Cold mains supply

1m min 1m min

If less

than 1m

see note.

50mm

10 Need help?

Need help? Need help?

Need help? Give us a call on 0844 701 6 73

0844 701 6 73 0844 701 6 73

0844 701 6 73 and speak to one of our trained advisors.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de cocina y baño de Bristan

Bristan

Bristan FLT BAS C Manual de usuario

Bristan

Bristan Z2 LUX 1/2 C Diagrama de cableado

Bristan

Bristan GWF BF C Diagrama de cableado

Bristan

Bristan Oval Series Manual de usuario

Bristan

Bristan Prism Manual de usuario

Bristan

Bristan Quest QST 1/2 C Diagrama de cableado

Bristan

Bristan VT 1/2 C Manual de usuario

Bristan

Bristan FH TDRD01 C Manual de usuario

Bristan

Bristan TO DSM C Manual de usuario

Bristan

Bristan Prism PM 3HWMBAS C Manual de usuario

Bristan

Bristan QD 1/2 C Diagrama de cableado

Bristan

Bristan Pear PEA PULLSNK C Diagrama de cableado

Bristan

Bristan AR THBSM C Manual de usuario

Bristan

Bristan Java Manual de usuario

Bristan

Bristan Claret CLR BASNW C/WHT Instrucciones de montaje

Bristan

Bristan Gummers H64WMT Instrucciones de montaje

Bristan

Bristan Nero Series Manual de usuario

Bristan

Bristan Regency R2 SHXAR C Instrucciones de montaje

Bristan

Bristan W BASIN04 C Manual de usuario

Bristan

Bristan Club DUC HNK C Manual de usuario

Bristan

Bristan AR SNKPURE C Manual de usuario

Bristan

Bristan 1901 Manual de usuario

Bristan

Bristan Java Series Diagrama de cableado

Bristan

Bristan Oval Tap Series Diagrama de cableado

Manuales populares de Accesorios de cocina y baño de otras marcas

Grohe

Grohe BRIDGEFORD 33 870 Manual de usuario

Hans Grohe

Hans Grohe Zenio Metro 31811000 Manual de usuario

Gröne

Gröne Zedra 32 555 Manual de usuario

Transform

Transform QL045 Manual de usuario

Sanela

Sanela SLU 09PTB Manual de usuario

Glacier bay

Glacier bay FP4A0052BNV Instrucciones de montaje

Lefroy Brooks

Lefroy Brooks C1-1400 Instrucciones de montaje

Grohe

Grohe Rapido E Manual de usuario

Danze

Danze D302455 Manual de usuario

Waterworks

Waterworks CEKM30 Hoja de instrucciones

Helvex

Helvex Omega TV-298 Manual de usuario

Tribata.

Tribata. GEORGIAN G5393 Manual de usuario

Alpha Bidet

Alpha Bidet Alpha One Manual de usuario

InSinkErator

InSinkErator H/HC3300 Manual de instalación

Clou

Clou Xo type 1 Manual de usuario

Kohler

Kohler Contra 26448T-4 Manual de usuario

Grohe

Grohe Bridgeford 20 158 Manual de usuario

Hans Grohe

Hans Grohe Croma Select S 180 Showerpipe EcoSmart... Manual de usuario