Branach TerrainMaster Manual de usuario
User
Instructions
EU
EN
NL
FI
FR
DE
IT
Safety Step Platforms
User Instructions: Safety Step Platforms
EN English 01
NL Nederlands 15
FI Suomi 29
FR Français 43
DE Deutsch 57
IT Italiano 71
English
User Instructions
The owner of this ladder/platform must ensure that the
User Instructions are available to the user. It is available
todownload from our website, branach.com.
This equipment should only be used by a trained and
competent person, otherwise the user should be under
the direct supervision of a trained and competent person.
The User Instructions cover the following products:
Safety Step Platforms (EN131-7:2013)
■EuroMaster All Terrain Platform: FPE-AT 0.9–2.0
■EuroMaster Premium Platform: FPE-PM 0.6–2.9
Before Use
■Inspect the ladder after delivery.
■Visually check the ladder and accessories are
undamaged and safe to use before every use.
Donot use a damaged ladder. Organise repair
byanauthorised person.
■Ensure you are fit enough to use a ladder, and the
ladder is suitable for the task.
■Before use, the user should make themselves aware
of the working at height regulations applicable to their
location and working environment.
■Regular, periodic inspections are required.
Figure 1A
max. 1
Figure 1B Figure 1C Figure 1D
FIGURE 1A. The user of the ladder must refer to
thisinstruction manual before using the ladder.
FIGURE 1B. Indicates the maximum number of
usersallowed.
FIGURE 1C & 1D. These ladders are suitable for
professional and domestic use.
01
EN GENERAL TERRAINMASTER SAFETY STEP PLATFORMS
Inspection Before Use
As a minimum, the following items should be inspected
before every use, or after the ladder is dropped
orimpacted.
■Cracked or damaged fibreglass rails.
■Damaged or missing steps/rungs.
■Damaged feet and rope.
■All rivets and bolts are in place.
■The ladder inspection date has not passed.
■The entire ladder is free from contaminants such as dirt,
oil, grease, paint, etc.
■Platform deck is operating freely.
■Rear safety rail is operating correctly.
DO NOT USE THE LADDER IF ALL ITEMS HAVE NOT
PASSED THE INSPECTION PROCESS. ORGANISE
REPAIR BY ANAUTHORISED PERSON.
System Guidelines
■The maximum total load for all ladders is 150kg,
including tools and equipment.
■Platform deck must engage to rung.
■Before doing any work from the platform, the rear
safety rail must be engaged.
EUROMASTER PREMIUM STEP PLATFORM FPEPM
■Stabiliser legs must be fitted correctly.
02
Using the Ladder
Figure 2F
UP
UP
Figure 2G
Figure 2E
Figure 2A Figure 2B Figure 2D
Figure 2C
OIL 0H2
OIL
■Do not exceed the maximum total load for the ladder
(refer to the ladder label).
■Be especially cautious of wind when outside.
■Use non-conductive ladders for unavoidable live
electrical work.
■Take precautions against children playing on the ladder.
■Face, and keep a secure grip on, the ladder when
ascending and descending.
■At all times maintain 3 points of contact.
■Maintain a handhold whilst working or take additional
safety precautions if you cannot.
■Wear suitable foot wear when climbing a ladder.
■Avoid excessive side loadings (e.g. drilling brick/
concrete).
■Equipment carried while using a ladder should be light
and easy to handle.
■Do not spend long periods on a ladder without breaks
(fatigue is a serious risk).
■Do not move the ladder when standing on it, or from
the top.
FIGURE 2A. Do not use the ladder on an unfirm or
unstable base. If you are not sure, STOP. DO NOT RISK
YOUR SAFETY.
FIGURE 2B. Do not overreach. Keep both feet on
theplatform deck throughout the task.
FIGURE 2C. Do not erect ladder on heavily
contaminatedground.
FIGURE 2D. Ladders with steps/rungs should be used so
that the steps/rungs are in a level, horizontal position.
FIGURE 2E. Ensure the platform deck has fully engaged
the rung when lowering deck into position.
FIGURE 2F. Only use the ladder in the direction indicated.
TerrainMaster
■Always use with TerrainMaster feet in an open position.
FIGURE 2G. Do not exceed the level the TerrainMaster
can operate in (15° slope). Use the built-in level bubble or
spirit level to ensure the platform ladder steps are level.
03
EN GENERAL TERRAINMASTER SAFETY STEP PLATFORMS
Positioning and Erecting the Ladder
■The ladder should be extended with the rungs or treads
level with the ground.
■The ladder must be erected on a firm, unmovable
surface with a maximum gradient of 15°.
■When positioning the ladder, take into account the
risk of collision with the ladder (e.g. from pedestrians,
vehicles or doors).
■Identify any electrical risks in the work area, such as
overhead lines or other exposed electrical equipment.
■The ladder should be stood on both feet; not supported
on the rungs or steps.
■Ladders should not be positioned on slippery
surfaces—such as ice, shiny surfaces or significantly
contaminated solid surfaces—unless additional
eective measures are taken to prevent the ladder
slipping or ensuring contaminated surfaces are
suciently clean.
■It is recommended that the platform ladder is
positioned on level ground or deploy the TerrainMaster
legs to ensure level bubble is within circle.
04
Storage/Care
■It is recommended that ladders be stored away from
direct sunlight, excessive heat, dampness or exposure
to the elements.
■Store the ladder in a safe place where it cannot be
damaged by vehicles, heavy objects or contaminants.
■Store the ladder securely so it does not become a trip
hazard or obstruction, and cannot fall and injure people.
■When storing ladders, give consideration for preventing
use by criminals for gaining unauthorised access, and
ensure children and the general public cannot climb
theladder.
■Repairs and maintenance should be carried out
by a competent person who has been qualified by
Branach in accordance with Branach’s instructions
and procedures. Only use Branach recommended
components and fasteners.
05
EN GENERAL TERRAINMASTER SAFETY STEP PLATFORMS
TerrainMaster
1. TerrainMaster Deployment
Slide the leg-lock latch towards the outside of the
platform ladder.
1 2
2. Extend TerrainMaster
1 Extend the TerrainMaster legs to their widest setting.
2 Depress the front and rear leg buttons to extend
theleg.
3 Check that the lock buttons re-engage in the extended
leg position.
21
06
3. Levelling
1 Adjust the TerrainMaster step height to be similar
tostep distance.
2 Un-weight the TerrainMaster leg to remove any
springtension.
3 Wind the leg adjuster wheel until a 2.5cm
(approximate) gap is formed between the latch
andtheadjusterwheel.
NOTES
■Final adjustments to TerrainMaster will be made
onceladder is erected.
■Final result should be 300mm +/- 15mm step height
from the ground.
■Screw turn wheel needs to be wound back to original
position to lock the legs closed during storage.
4. Check Incline & Step Height
4 Use level bubble to ensure platform ladder is at
correct angle, and level to terrain accordingly. Adjust
TerrainMaster wheels to ensure platform ladder level.
5 Ensure there is a 300mm +/-15mm step from ground to
first rung.
300mm
+/-15mm
21
07
EN GENERAL TERRAINMASTER SAFETY STEP PLATFORMS
max.
150
kg
EuroMaster All Terrain
Step Platform (FPE-AT)
A
H
E
D
L
K
C
G
B
I
F
J
M
Glossary
AStiles HBracket
BRungs IRods and Struts
CFeet JSpacer
DPlatform Deck KStep Plates
EPlatform Hooks LRear Step
FPlatform Kickboard MLevel Bubble
GHandrail
08
Tabla de contenidos
Idiomas:
Otros manuales de Escalera de Branach
