Brahler DIGIMIC Manual de usuario

DIGIMIC®

Digital Discussion System - wireless

Operating instructions

Release 1.2

Printed in Germany

Should you have questions about this manual please contact:

Brähler ICS Konferenztechnik

International Congress Service AG

P.O. Box 3264

53627 Königswinter, Germany

T (0)2244 930-0

F (0)2244 930-450

E [email protected]

www.braehler.com

similar methods.

BRÄHLER ICS reserves the right to make changes without notice.

Oct-09

Table of contents

About this manual.............................................................................................4

Symbols...................................................................................................................4

General information...................................................................................................4

Important information ........................................................................................ 5

Important safety instructions ......................................................................................5

Important safety information.......................................................................................6

DIGIMIC®Digital Conference System.................................................................... 8

Wireless system components......................................................................................8

Wired system components .........................................................................................8

CE Conformity and FCC Statement..............................................................................9

Autonomous mode.......................................................................................... 10

DSpark Radio Transceiver Unit............................................................................................11

Connecting the Power Supply .......................................................................................... 12

Transmitting antenna .........................................................................................................13

Adjustment of the transmitting antenna ............................................................................13

Settings ...........................................................................................................................14

REGISTER......................................................................................................................15

HIGH POWER.................................................................................................................15

PRIOrity mode................................................................................................................15

LS INTERN.....................................................................................................................16

DDoc Docking Unit............................................................................................................17

Slave mode .................................................................................................... 19

Single operation mode ..................................................................................... 21

System startup .................................................................................................................21

DDoc Docking Unit............................................................................................................21

Indication of battery status..............................................................................................21

Automatic switch off......................................................................................................22

Charging of the battery pack...............................................................................................23

Charging via power supply...............................................................................................23

Charging via DTray Charging Tray ....................................................................................23

Removing the battery pack ..............................................................................................23

DTray Charging and Transport Tray ..................................................................................... 25

Multi room operation ....................................................................................... 26

Multi room operation mode examples...................................................................................26

Radio system number.........................................................................................................27

Adjusting DMic/DDoc combination to a room (0 – 4) .............................................................28

Resetting of DDoc Docking Units.........................................................................................28

Allocation of DDoc Docking Units........................................................................................28

Technical data ................................................................................................ 29

DSpark Radio Transceiver Unit............................................................................................29

DDoc Docking Unit............................................................................................................30

Appendix ....................................................................................................... 31

Block diagrams .......................................................................................................31

SERVICE FORM ......................................................................................................35

Contact information.................................................................................................37

About this manual

Please keep this manual together with the system units. If you pass on the units to other parties, please

include this manual.

Symbols

The meanings of the symbols and fonts used in this manual are as follows:

Indicates an important note, if not minded, the functionality of the unit, the security of your data, or

your health are put at risk.

Supplementary information, remarks, and tips follow this symbol.

Text which follows this symbol describes activities that must be performed in the order shown.

Texts in bolded letters require your special attention.

General information

Please read the manual carefully, taking special care when you see this symbol as indicates

important information!

All brand names (marked with *) are registered trademarks of their respective owners.

The warranty invalidates, if you cause (generate, precipitate) inappropriate use or handling of the

unit.

Important safety instructions

Important information

Important safety instructions

•Read these instructions for use.

•Keep these instructions in a safe place.

•Heed all warnings.

•Follow all instructions.

•Do not use near water.

•Clean only with a dry cloth.

•Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•Do not install near any heat sources such as central heating radiators, electric heaters, stoves, or

other units that produce heat (e.g. amplifiers).

•This unit is supplied with an IEC mains cable complete with a molded mains plug. This is for your

safety – do not tamper with the mains. If the supplied cable does not fit your mains socket, please

consult a competent electrician for a replacement cable that matches the power output sockets in

your country, or to replace the obsolete socket with one to current standards.

•Protect the mains cable from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where it exits from the unit.

•Only use attachments/accessories specified by the manufacturer.

•Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tip-

over.

•Unplug during lightning storms or when unused for long periods of time.

•Refer all servicing to qualified service personnel. Servicing is required if the unit has been damaged

in any way, such as mains cable or plug damage, liquid has been spilled, objects have fallen inside,

the unit has been exposed to rain or moisture, does not operate properly or has been dropped.

Important safety information

Warning!

To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. Do not open

the unit as there are potentially dangerous voltages present inside. Refer all servicing to qualified

service personnel.

Caution! Use only accessories recommended by the manufacturer to avoid fire, electric shock, or other

hazards. To prevent the risk of electric shock, do not remove cover or back. No user serviceable

parts inside! Refer all servicing to qualified service personnel.

Warning! Power source

The central control unit is a Class 1 unit. It must only be connected to properly grounded power

outlets. This unit should be operated only from the type of power source indicated on the marking

label.

lf you are not sure of the type of power supply to your building, consult your dealer or local power company.

Disconnection from the mains

To disconnect the unit from the mains, pull the mains plug out of the wall outlet.

Overload

Do not overload wall outlets and extension cables as this may result in fire and electric shock.

Objects and liquids

Never push objects of any kind through openings of this unit as they may touch dangerous voltage points or

short-out parts that could result in fire or electric shock. Never spill liquids of any kind onto the unit. Should a

spillage occur, unplug the unit and have it checked by a technician.

Maintenance and care

No user serviceable parts inside! Do not attempt to service this unit yourself as opening or removing covers

may expose dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

Clean only with a dry cloth. Do not use detergents or other liquids.

Replacement parts

When replacement parts are required, be sure the service technician uses replacement parts specified by

the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety check

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

Important safety information

The DIGIMIC conference system is state of the art and has been designed to meet the regulations in force.

Nevertheless, the individual components of the DIGIMIC conference system can cause danger for persons

and material assets if:

•the system is not used as intended,

•the system is set up by personnel not familiar with the safety regulations,

•the system is converted or altered incorrectly,

•the safety instructions are not observed.

Warning!

This system is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the sound pressure

corresponding to the maximum permissible volume which is by law (in some countries) allowed to affect your

hearing for the duration of a working day. It is used as a basis according to the specifications of industrial

medicine. Higher volumes or longer durations can damage your hearing. At higher volumes, the duration

must be shortened in order to prevent hearing damage.

The following are sure signs that you have been subjected to excessive noise for too long a time:

You can hear ringing or whistling sounds in your ears.

You have the impression (even for a short time only) that you can no longer hear high notes.

DisposalThis symbol on the product, in the instructions or on the packaging means that your electrical and

electronic equipment should be disposed at the end of its life separately from your household

waste. There are separate collection systems for recycling in the EU. For more information, please

contact the local authority or your retailer where you purchased the product.

Make sure to dispose of used batteries as required by local waste disposal rules.

Never throw batteries into a fire (risk of explosion) or dustbin.

When scrapping the equipment, remove the batteries, separate the case, circuit boards, and cables, and

dispose of all components in accordance with local waste disposal rules.

DIGIMIC® Digital Conference System

DIGIMIC®Digital Conference System

DIGIMIC stands for digitally controlled microphone management system. With DIGIMIC the digital age of

conference technology began. Technical advancements and user benefits defined DIGIMIC as a market

leader. DIGIMIC is used today throughout the world and in many regions it is a synonym for discussion

systems.

DIGIMIC set the standard for transmission quality, reliability, and compatibility. More importantly DIGIMIC

raised the bar regarding real value.

Brähler continues to lead with the introduction of the new DIGIMIC. Our new platform for conferencing

encompasses 50 years of experience and extraordinary innovation. With DIGIMIC it is no longer a question

of what to use but rather how to use it best. The wired system is upgraded to a wireless system by simply

adding the wireless docking unit whenever needed. It is a simple and elegant solution for both rental and

sales applications.

Simple, versatile, DIGIMIC!

The digital conference system provides a 100% stand alone solution and is completely self-configuring. With

DIGIMIC it is easier then ever before to setup even the most complex conference systems. True plug (and /

or unplugged) and play setup ensures that any microphone unit is operational instantly when connected.

DIGIMIC matches digital broadcast and studio audio requirements, meeting the needs of today’s

conferencing world. At any time the system can be expanded to include our conference software. TCP/ IP

communication is utilized to offer microphone control and name handling as well as other conference

requirements.

The delegate’s frontend – the microphone unit – offers a thoughtful ergonomic design enabling the delegate

to concentrate on the conference.

Wireless system components

•DSpark Radio Transceiver Unit

•DChair Chairperson’s Conference Unit

•DMic Delegates´ Conference Unit

•TMD/01 Conference Microphone

•TM58/6 Conference Microphone

•DDoc Docking Unit for DChair/DMic

•DTray Charging and Transport Tray

for 10 rechargeable batteries

•DPack Transport Case

for 10 DIGIMIC wireless units

•Antennas for DSpark Radio Transceiver Unit

Wired system components

•DCen Central Control Unit

•DChair Chairperson’s Conference Unit

•DMic Delegates´ Conference Unit

•TMD/01 Conference Microphone

•TM58/6 Conference Microphone

•D9 System cable

DIGIMIC®Digital Conference System

CE Conformity and FCC Statement

This equipment has been tested and found to comply with the limits of the European Council

Directive on the approximation of the member states relating to electromagnetic compatibility

(98/336/EEC) according to EN 55022 Class A.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTICE:

Changes or modifications made to this equipment not expressly approved by Brähler ICS Konferenztechnik

AG may void the FCC authorization to operate this equipment.

NOTICE:

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

NOTICE:

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Radiofrequency radiation exposure Information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with minimum distance of 20 cm between the radiator and your

body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Autonomous mode

The digital conference system provides a 100% stand alone solution and is completely self-configuring. With

DIGIMIC it is easier then ever before to setup even the most complex conference systems. DIGIMIC

matches digital broadcast and studio audio requirements, meeting the needs of today's conferencing world.

When connected to the DCen the system can be expanded to include our conference software. TCP/ IP

communication is utilized to offer microphone control and name handling as well as other conference

requirements. The delegate's frontend – the microphone unit – offers a thoughtful ergonomic design enabling

the delegate to concentrate on the conference.

DIGIMIC wireless can be used in different system modes as described in the following:

•Autonomous mode (also Multi-room mode, described in a separate chapter)

•Slave mode (please refer to page 19)

System overview wireless basic discussion system

Figure 1

TMD/01

TM58

External

Power

Supply

Wireless Delegate Units

DMic with DDoc

DSpark

Radio Transceiver Unit

Connection to

LS signal OUT

Connection to

ext. signal IN

Wireless Chairpersons’ Unit

DChair with DDoc

Microphone

Otros manuales para DIGIMIC

Tabla de contenidos

Otros manuales de Sistema de conferencias de Brahler

Brahler

Brahler MSI8V CDSVAN Manual de usuario

Brahler

Brahler Digivote III Manual de usuario

Brahler

Brahler CDSVAN Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario