Brady I.D. PRO Plus Manual de usuario

•I.D. PRO Plus

•Introduction

§Features and Capabilities

§Printer Comparison

•Basic Operations

§Setup

§Keyboard

§Functions

•More line

•Feed alignment

•Serialization

•Standard and bold printing

•Tutorial

§Battery and ribbon Installation

§Label installation and removal

§Printing labels

§Serialization

•Cleaning and Maintenance

•Troubleshooting

§Most commonly asked questions

Page 2

Features and capabilities

•The I.D. Pro Plus is a highly portable self contained printing machine.

•The I.D. Pro Plus uses three different material widths and can print on a variety of materials (i.e..paper,

polyester, vinyl cloth, self-laminating vinyl, nylon cloth, Tedlar ?, polyimide, and heat shrinkable materials).

•The I.D. Pro Plus allows printing up to eight lines of print and 15 characters on each line. It has three format

settings and two font sizes.

•It has Bold type print capabilities and is 43% faster than the I.D. Pro.

•It allows for numeric and alphabetic automatic serialization of text and can print multiple labels.

•The ribbon is a removable self re-inking R5000 series ribbon.

•It is battery operated and can be run while the battery is recharging.

•The I.D. Pro Plus has FCC class A approval and the battery charger is UL/CUL listed.

•More lines of discrete text: The I.D. PRO Plus wire marker printer speed has been increased to allow for

greater printed label throughput.

Printer comparison

Page 3

Features BMXC LS2000 ID PRO PLUS

Alignment, vertical & horizontal alignment of text No Yes Yes (vertical)

Backing material out of unit No Power reverse Yes

Bar code printing No No No

Battery, N-Cad battery pack Yes Yes Yes

Battery, plug-in type battery connector Yes Yes Yes

Bold print No Yes Yes

Built-in carrying handle No Yes No

Case, durable injection mold No Yes Yes

Case, hard carrying Included Optional Optional

Case, soft Carrying N/A Optional N/A

Case, upper & lower case letters Upper Both Upper

Designed for electrical/electronic needs Yes Yes Yes

Download legends into printer from PC No Yes No

Keyboard, QWERTY No Yes No

Label stock waste Not much None None

Labels, uses BMXC-Style labels & sleeves Yes Yes Yes

Lines, adjustable space between lines No YesNo

Lines, display lines on screen 242

Paper out sensor Yes Yes No

Prints labels as small as .125" high No Yes No

Print sizes available 4125 2

Prints terminal block ID strips No Yes No

Print head, rugged shuttle print head No Yes Yes

Power, power loading of material Yes Automatic Yes

RAM memory 8K 32K N/A

Ribbon, easy load ribbon in cartridge No Yes Yes

Registration, optical print registration Yes Yes Yes

Registration, precise print registration No Yes Yes

Rotate printing for terminal block strips No Yes No

Serialization Yes Yes Yes

Speed, printing speed Good Good Good

Symbols, special No Yes Yes

Tear-off bar No Yes No

Type, scalable No Yes No

Volume: Good for high volume work? YES YES NO

Warranty 1 year 1 year 6 months

Weight 5 lbs. 7 lbs. 1.6 lbs.

Width printable 1.5 2.5 1.5

6 & 9 underlined No Yes No

Basic operations

Print Sizes

Page 4

Small = 12 CPI, .09375"H

Large = 8 CPI, .125"H

Formats

Strip -used when printing on Brady Strip series labels such that contain two or more butt cut pieces. Your text

will show only once on the screen but will be duplicate the text to the number of strips indicated when printing.

Center -automatically centers the text vertically to the total number of lines entered.

Wire/Repeat -repeats the text entered for the entire length of the label.

Keyboard

Clear -clears all characters from the screen .

Delete -deletes the character at the cursor position

Feed -advances the labels .

Shift -(3 shift keys; 1 is a keyboard key and 2 are in the hand grips

Print -prints the text displayed on the screen.

Enter -activates the size code at boot-up and acts as a return key to go to the next line .

Arrow Keys -move the cursor in the direction indicated on the key.

Serial -highlights the character to be serialized .

Functions

Feed alignment offset for small markers and labels

A new feed alignment (vertical registration) adjustment has been added. To obtain more accurate print registration

on 1-line labels and markers, the alignment can be changed plus or minus 3 dot lines:

1. Press Shift-1key combination while in label text edit mode.

2. Press Up or Down arrow keys to change from -3 dot lines up to +3 dot lines.

3. Press Enter key. The printer will feed the next marker to complete registration.

4. Print label/marker.

5. If alignment is not acceptable, repeat steps 1 to 4.

Bold Print

Page 5

Bold printing is supported in both large and small font modes. To toggle the bold setting on or off:

1. Press the Shift-O key combination.

2. Press the Up arrow key to toggle bold printing on or off.

3. Press the Enter key to exit.

Batch serialization

To print a batch of serialized labels:

1. Position the cursor over the right-most character of the desired field, i.e. the number 8 in 99998.

2. Press the Shift-Serial key combination.

3. Enter a number from 1 to 99.

4. Press the Print key to start printing or press the Clear key to cancel.

Multiple serialized labels/markers

To print multiple copies of serialized labels or markers:

1. Press the Shift-Serial key combination.

2. Enter a number from 1 to 99.

3. Press the Shift-Print key combination.

4. Enter a number 1 to 99.

5. Press Enter or Print to print or press Clear to cancel.

Strip mode serialization

Batch mode serialization in strip mode differs slightly from that of component and wiremarker mode. Because two

strip markers are printed at a time (side by side), the serial number is incremented by one for eachof the strip

markers. This allows the user to alter the way strip markers are serialized. For example:

To print 4 strip labels numbered from 0000 to 0003, you would do the following: Refer to Figure 1A.

1. Enter “0000" in the left hand marker display field.

2. Enter “0001" in the right hand marker display field.

3. Press the Shift-Serial key combination.

4. Enter the number “4".

5. The result will be four labels numbered: 0000, 0001, 0002, 0003.

Page 6

To print 8 stip markers in pairs of 2 numbered from 0000 to 0003.

1. Enter “0000" in the left hand marker display field.

2. Enter “0001" in the right hand marker display field.

3. Press the Shift-Serial key combination.

4. Enter the number “2".

5. Press the Shift-Print key combination.

6. Enter the number “2".

7. Press the Enter or Print key to start printing.

8. The result will be 4 pairs of strip markers numbered 0000 to 0003.

Refer to Figure 1B below. In either case, due to the way the serial strip markers are incremented, you would

always enter a number 1-larger in the right side of the strip mode display.

Material Guide Pins -(located on the under-side of the unit)

Use when removing labels or changing the label width.

Print Head Mask

Thin metal shield located between the platen and the print head assembly.

Nip & Drive Rollers

Drive roller -a rubberized roller located directly under the fixed and adjustable material guides.

Nip Rollers -small rollers located in the material guides. They exert pressure drive roller.

Page 7

Tutorial

•Install the battery and charge it for 4-5 hours. Select the corresponding material guide setting to match the

width of the label you are using (i.e. ½", 1", or 1-1/2).

•Insert the labels onto the roll holder and place in the label holding area.

•Turn the unit on and with the arrow keys select the appropriate size code. This information can be obtained

from the inside of the label core and on the outside of the box.

•Insert the labels into the material guides and press the feed key.

•Select the size text (small or large) to be printed and the format required.

•Press Print for one label or Shift and Print for multiple labels.

IMPORTANT -When removing the labels from the ID Pro it is imperative that the material guide pins are pushed

down while removing the labels

Serialization

Alpha and numeric characters can be serialized on the I.D. PRO Plus. Put the cursor under the character to be

serialized. Press Shift & the Serial key. Enter number of times the data is to increment and press Print. When

the serialized character reaches 9 or Z the character to it's left is incremented and the original number becomes a 0

or an A. (i.e. 099 becomes 100). Alpha and/or numberic serialization is possible.

Page 8

Cleaning and maintenance

•Turn the unit off.

•Remove the labels and the bottom door. With a cotton swab and isopropyl alcohol clean the drive roller and

the material guide nip roller.

•Drive roller cleaning -Turn the unit on. From the back of the unit run the cotton swab over the drive roller

press ant Feed button (this will rotate the roller). Move the material guides to access all of the drive rollers.

Continue this until the roller is clean.

•Material guide cleaning -Insert the cotton swab into the material guide by the white nip roller. Press the Feed

key to rotate the nip rollers while cleaning them.

•Printhead mask cleaning -Gently rotate the platen toward the back of the unit. Clean off the outside surface of

the printhead mask with isopropyl alcohol and a cotton swab. Make sure that both slots are thoroughly clean

and free of dirt. Also, remove any black lint that is around the printer.

Page 9

•Ribbon installation -Hold the ribbon cartridge over the ribbon compartment with the exposed ribbon facing

toward you. Tilt the left side of the cartridge down and position the ribbon along the left side of the printer.

Gently move the ribbon cartridge down and press it into the ribbon compartment until you hear it click into

place. Be sure that the ribbon is next to the edge of the printhead as shown on the inside of the roll door.

Tighten the ribbon by advancing the turn knob in a clockwise directions.

Troubleshooting & Frequently Asked Questions

Q. How many part numbers can you use with the I.D. PRO Plus wire marker printer?

A. Over 166 label/sleeve combinations.

Q. Are we going to make custom labels for the I.D. PRO Plus wire marker printer?

A. Yes. Treat like BMXC, check for same size.

Q. How do you do simple serialization?

A. 1. Press the SHIFT-SERIAL key combination.

2. Enter a number from 1 to 99.

3. Press ENTER or PRINT to print or press CLEAR to cancel.

Q. What are the text sizes available on the I.D. PRO Plus?

A. Large text: 8 cpi (0.125 height)

Small text: 12 cpi (0.094 height)

Q. What are the main advantages of the I.D. PRO Plus wire marker printer?

A. 1. 43 percent faster

2. Availability of bold printing

3. Serialization capability

4. Up to 8 lines of different text

Q. How do I respond when the customer indicates that the I.D. PRO Plus is printing off centered?

A. Find out what material the customer is using and change the size code.

Q. Compare the life span of the ribbon when using bold printing versus normal printing?

A. Approximately 16,000 characters with bold type versus approx. 20,000 characters of normal type.

Q. When purchasing the I.D. PRO Plus wire marker printer what can I expect to receive?

A. Printer Batter pack Wrist Code

Page 10

Ribbon Charger

Pocket guide User manual

Q. What if the customer wants to print more than one of the same legend?

A. Press the SHIFT key and the PRINT key at the same time, enter the number of labels needed, press PRINT.

Q. Are there colored ribbons available for the I.D. PRO Plus?

A. Only black ribbons are available.

Q. What items are excluded from the I.D. PRO Plus?

A. Electronic component labels (ECL); Terminal block markers (e.g. TB03);

Rollform cable markers (both WRCM B637 and B330); Brady Tags (i.e. WMT . . .); Permashield markers in

Size 514.

Q. What is the life span of a charged battery?

A. Up to 250 labels, depending upon the amount of text.

Q. How long does it take to charge the battery?

A. 4 to 5 hours

Q. Will the I.D. PRO Plus print bar codes?

A. No.

Q. Are we able to upgrade our I.D. PRO to an I.D. PRO Plus?

A. Yes. Obtain an RMA number from Tech Support and return for upgrade.

Q. How do we utilize the bold printing feature of the I.D. PRO Plus?

A. Press the SHIFT key and zero key then the up arrow key to turn bold on. Repeat steps to turn bold off.

Q. What is the battery pack part number for people who want to use the I.D. PRO Plus in Europe?

A. Brady part No. I.D. PRO Plus 33983

Q. What is the warranty for the I.D. PRO Plus?

A. The I.D. PRO Plus wire marker printer comes with a 6-month warranty.

Q. How are warranty repairs handled by Brady?

A. An RMA (return material authorization) is issued through Tech Support. The unit is returned for repair or

replacement at Brady's option.

Q. How are non-warranty repairs handled by Brady?

A. Brady will repair the unit and bill a flat rate of $140.00 (as of 1/1/2001 -subject to change)

Q. Will Brady provide factory loaners while our customer's I.D. PRO Plus is being repaired?

A. No.

Tabla de contenidos

Otros manuales de Etiquetadora de Brady

Brady

Brady BBP 85 Instrucciones de operación

Brady

Brady BradyPrinter S3100 Manual de usuario

Brady

Brady M610 Manual de usuario

Brady

Brady BMP 21-LAB Manual de usuario

Brady

Brady BSP31 Manual de usuario

Brady

Brady BBP 33 Manual de usuario

Brady

Brady GlobalMark 2 Manual de usuario

Brady

Brady BBP 35 Manual de usuario

Brady

Brady BradyPrinter M611 Manual de usuario

Brady

Brady LabelMark 3.2 Manual de usuario

Brady

Brady ID PAL Manual de usuario

Brady

Brady TLS PC Link Manual

Brady

Brady BradyJet J2000 Manual de usuario

Brady

Brady BMP 51 Manual de usuario

Brady

Brady Bradyprinter THT 200M-e Manual de usuario

Brady

Brady BMP 41 Manual de usuario

Brady

Brady BMP21 Manual de instrucciones

Brady

Brady BMP71 Instrucciones de operación

Brady

Brady BradyPrinter S3700 Manual de usuario

Brady

Brady LABXPERT Manual de usuario

Brady

Brady DSP-2 Manual de usuario

Brady

Brady BBP31 Manual de usuario

Brady

Brady BBP 33 Manual de usuario

Brady

Brady BBP31 Instrucciones de operación

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario

Novexx Solutions

Novexx Solutions XLP 604 Manual de usuario