BOSKON BG-520 Series Manual de usuario

Cellular MMS HD Scouting Camera

BG-520 Series

INSTRUCTION MANUAL

TABLE OF CONTENTS

General Information

1.1) Description

1.2) Features

1.3) Application

1.4) Parts and Controls

Quick Start

2.1) Load Batteries

2.2) Insert SIM Card and SD Card

2.3) Enter Into ON Mode

2.4) Enter Into Test Mode

2.5) Enter Into OFF Mode

Advanced Setting

3.1) Parameter Settings

3.2) Supported Format

3.3) Shooting Information Display

3.4) MMS Menu Definition

3.5) Set up Camera/MMS ON PC

3.6) SMTP Function

3.7) Multi-Time lapse features

Important Notes

4.1) SD Card

4.2) 850NM and 940nm IR LED

4.3) power supply and Battery Box

4.4) Downloading the photos/Videos

4.5) Mounting and Positioning the Camera

4.6) FAQ on MMS Function

4.7) Troubleshooting/FAQ

4.8) Firmware Upgrades

Two-Year Limited Warranty

Appendix I Technical Specifications

Appendix II Packing List

GENERAL INFORMATION

1.1) Description

This camera (BG-520M) is a Cellular digital scouting camera with MMS function, it can be

triggered by any movement of game in a location, detected by a highly sensitive passive infra-red

(PIR) motion sensor, and then automatically captures high quality pictures (up to 12M pixels) or

records HD video clips (1080P).Then it can send the pictures (MMS: Multimedia Message service)

or SMS instantly to your mobile device or Email Address via GSM network. You’ll be alerted just

when something has happened. And the camera can be also used as a regular hunting camera if

you don’t insert a SIM Card or turn off MMS Function.

1.2) Features

ØProgrammable 5 ,8 or 12 Megapixel high-quality image resolution.

ØProgrammable 1080P,720P High definition Video

Ø38pcs Infrared night vision LEDs for flash range as far as 65 feet ( when use 850NM LED)

ØUltra low standby power consumption. Extremely long in-field life (in standby mode, up

to 6 months with 8 x AA batteries when use regular function)

ØWorking in Most extremely temperature -22℃+-70℃

ØBuild-in Full Definition 2inch Display to review Image, Video, Cellular signal Information

ØLockable and Password protected

ØDate, Time, Series number ,Temperature and Moon Phase can be stamped on the pictures

ØMulti-time lapse function: When Timer setting on, programmable to only work in specified

period every day. This feature can be used together with Time Lapse feature to meet your

timetable (Allow user to setup 4 different timer each day, this features is unique and very

useful for some customer who cares multi-time lapse most)

ØTwo MMS image size options: 640 x 480 (VGA)

ØCamera and MMS function can be conveniently configured by a Enclosed CD on Computer

ØDaily Report allow user to know the camera status in preset time every day via MMS or SMS

function.

ØAdvanced Remote Cellular Technology transmits images to your cell phone and email

account constantly at lower battery consumption and shorter transmission time.

ØAutomatically send text alert when battery power level goes low

ØAll MMS pictures, as well as the original ones, saved on SD card

ØOperates globally via GSM/GPRS network. Supports four bands: 850 / 900 / 1800 /

1900MHz

1.3) Application

ØAct as Trail Camera for hunting

ØAct as Time Lapse Camera to observe Cold Blood Animal or Event.

ØAll indoor/outdoor surveillance where invasion evidence needed

1.4) Parts and Controls

lFigure A shows the Front view of BG-520M

lFigure B shows the Back view of BG-520M

lFigure C shows the Bottom view of BG-520M

GSM Antenna

External DC Power (6V)

2inch Color Display

Microphone

Speaker

Lens

LED IR Flash

Light Sensor

Indication LED

Remote signal LED

Laser Pointer

PIR Sensor Lock Hole

Tripod Figure A: Front View of BG-520M

Tilt Adjuster

Security Rope hole

Figure B: Back View of BG-520M

The camera has the following I/O interfaces: USB connector, SD-card slot, SIM Card TV.output

and The 3-way Power/Mode Switch is used to select the main operation modes: OFF, ON and

TEST

On the back of camera, there is a lock for theft-proof and an adjuster to change the tilt when

mounting on an irregular interface e.g. tree.

Please take a few minutes to familiarize yourself the following intuitive controls and displays.

USB Port SIM Card Slot

TV Out Connector

Battery Cover

Remote control

Battery Depot

Power/Mode Switch Lock

Figure C: Bottom View of BG-520M

The remote control is an input device of the camera and is primarily used for customer settings

and password input. This is an infrared type wireless remote control.The maximum remote

distance is 9 meters. There are fifteen buttons on the remote control.

Select Item(UP)/Increase value

Display Menus /Exit Make Selection/Enter

Change Value (Left) Change Value (Right)

Select Item(Down)/Decrease

A) Press the punctuation “ ” to turn on laser direction pointer in the night.

Please note: the Laser could be harmful to eyes if pointed at other humans.

CAUTION: If you are not using the camera for an extended period of time, it is

highly recommended that you remove the batteries from the camera to avoid

possible acid leak that may damage the camera which would void the warranty.

QUICK START

2.1) Load Batteries

To supply power for the camera, Eight AA size batteries are needed, Voltage of each battery

should be 1.5V.

Open the bottom cover by pulling down the lock hole. Confirm that the power switch is at the

OFF position, pull out the battery depot. Load the fully charged batteries into the depot

according the polarities sign shown below. Push back the depot to the battery chamber. The

following batteries with 1.5V output can be used:（NOTE: rechargeable battery voltage should

be also reach 1.5V each, 1.2V Rechargeable Battery will only working short time）.

1. High-density and high-performance alkaline batteries (Recommended)

2. Rechargeable alkaline batteries

3. Rechargeable NiMH batteries

When in low-battery state, Please change the batteries in time. If you have set the MMS

function, it will send you a SMS or Email to indicate the low battery situation.

2.2) Insert SIM and SD Card

You need to purchase the SIM card from your local Mobile

Phone Network Operators. Making sure they provide

Multimedia Messaging Service (MMS). Ask them for the

relevant information to configure the MMS settings on your

camera.( Please Reference 3.5 Set up MMS function on PC)

(Note: Please Open the Bottom Cover and Insert the SIM card

into SIM card slot under OFF Mode. be sure to insert SIM-card

into the SIM-card slot with angle in the upper left)

Open the bottom cover. Insert SD-card into the card slot with

Golden Pin side upwards. Please note: That the SD-card can only be plugged in one direction.

(NOTE: The camera will not power up if SD card is not inserted)

2.3) Enter ON Mode

Before switching on, please pay attention to the follows:

ØAvoid temperature and motion disturbances in front of the camera such as big

leaf, curtain, air-conditioner, air outlet of the chimney and other heat sources to prevent from

false triggering.

ØThe height from ground for placing the camera should vary with the object

size appropriately. In general, one to two meters are preferred

Slide the power switch to the ON position to power on the camera and enter into

the ON mode. Before entering into the ON mode, you can adjust the camera the target

monitoring area by laser pointer

After switching on the camera, the motion indication LED (red) will blink for

15s. The 15s is a buffering time before autonomic capturing photos or videos,

e.g. for closing and locking the bottom cover, fixing the camera on a tree and walk

away.

In ON mode, it is unnecessary to use the remote control. The camera will take

pictures or videos automatically according to the default settings or previous custom

settings. The camera has the sound recording function, so the sound will be embedded

in the video clip while capturing a video.

2.4) Enter TEST Mode

Slide the power switch to the TEST position and enter into the TEST mode. In this mode you

can take pictures or video clips like a regular digital camera, or enter the Menu to set up

parameters by remote control.

2.5) Enter OFF Mode

Slide the power switch to OFF position to power off the camera. Off mode allow user to insert

SD ,SIM Card, replace Battery etc. Please note that even in the OFF mode, the camera still

consumes certain power at µA level. Therefore, please remove the battery if the camera will

not be used for a long time

(Cautions: The Power Switch can’t be Slide From “OFF” Mode directly to “ON” Mode

or From “ON “ Mode to “ TEST” Mode. Each time, user should Slide power switch

into “OFF” Mode, then into “Test” Mode and Finally Enter into “ON” Mode)

ADVANCED SETTING

3.1) Parameter Settings

This chapter explains the advanced operations for customizing the camera settings. The settings

can only be customized in TEST mode and there are two ways are available to customize the

camera settings. Including: Remote control and Parameters Setup EXE file Storage on CD

Disk. (Please reference 3.5 Set up Camera/MMS ON PC)

Following will introduce how to customize the camera settings by remote control:

Press “MENU” Key to Enter/Exit the menu, Press , , to move the marker,

Press , to change the setting.

Parameter Settings (Bold=Default) Description

Mode Camera

Video

Camera+Video

Select which Mode you would like to

use. In Camera+video mode, the camera

will first take a picture and then start to

record Video immediately.

Photo Size 12M Pixel

8M Pixel

5M Pixel

Selects resolution for still photos from 5

to 12 megapixels, Higher resolution

produces better quality photos, but

creates larger files that take up more of

the SD card capacity. 5M is a good

compromise between quality and file size

Video Size 1080P

720P

VGA

Selects video resolution, higher

resolution produces better quality videos,

but creates longer files that take up more

of the SD card capacity. 1080P and 720P

are high definition video format.

Video Length 10sec

20sec

30sec

Sets length per captured video clip,

settings begin with 10 second, 10sec is

Default value. All videos are in AVI

format that can be played in most of

media players

Set Clock MM/DD/YY - HH:MM:SS

DD/MMS/YY-HH:MM:SS

YY/MM/DD-HH:MM:SS

Press “OK” to setup date and Time (the

Date format can be switchable)

Interval

(Optional from 1Sec to

60Min)

OFF

Select the length of time that the camera

will wait from when the last picture was

taken and written in the SD card, until it

responds to any new triggers from the

PIR sensor. During the selected interval,

the camera will not take pictures/videos.

This prevents the SD card from filling up

with too many redundant images. (Note:

when your turn on Interval, the

camera can also sending mms or SMS)

Image Burst Optional from 1 photo to 5

photo

Selects how many photos are taken in

sequence per trigger in camera mode.

Beep ON/OFF Selects ON if you want voice when setup

the camera by remote control

Sense Level Medium/Low/High Selects the sensitivity of the PIR sensor.

The “ High” setting will make the camera

more sensitive to infrared (heat) and

more easily triggered by motion, and the

“Low” setting makes it less sensitive to

heat and motion. The High setting can be

useful when the ambient temperature is

warm( making it more difficult for the

sensor to detect animals), and the Low

setting may help in cold weather if often

by anything warmer than the

surroundings

Time Stamp ON/OFF Select “On” if you want the Date & Time

(that the photo was captured) imprinted

on every photo, select “Off” for no

Imprint

Playback Press “ OK” to Playback Pictures/Videos

on 2inch HD Display, Press “Right

Arrow” to Delete video or picture, Press

Left button to Play video, Press Up and

Down to adjust the Volume or change

picture and Video.

Multi-Timer ON/OFF

H:M—H:M

Select on if you want the camera working

in specified time everyday, our camera

allow user to setup four different

specified time each day. Each different

time should be not overlap with other

different time outside the time period the

camera will not be triggered or take any

photos/videos this features can be used

together with Time Lapse function.

Series Number ON/OFF

Four Digit (From 0-9, A-Z)

Set Series number can record the pictures

from specified camera if install some unit

Tabla de contenidos

Manuales populares de Cámara de exploración de otras marcas

Nestbox

Nestbox C13 Manual de usuario

Wildview

Wildview STC-TGL1 Manual de usuario

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Manual de usuario

Suntek

Suntek HC-800M Manual de usuario

Spypoint

Spypoint G4 Manual de usuario

Duramaxx

Duramaxx 10029765 Manual de usuario

Brecom

Brecom C2400 Manual de usuario

BlazeVideo

BlazeVideo A280W Manual de usuario

Bestok

Bestok 5210GM Manual de usuario

GardePro

GardePro X60P Manual de usuario

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Manual de usuario

PNI

PNI HUNTING 280C Manual de usuario

Muddy

Muddy Pro-Cam 14 Manual de usuario

Bresser

Bresser 3310006 Manual de usuario

Recon Outdoors

Recon Outdoors HS410 Manual de usuario

Braun

Braun 57660 Manual de usuario

Wildgame

Wildgame Shadow Manual de usuario

Spypoint

Spypoint FLEX Manual de usuario