Bosch AUTODOME 7000 HD Manual

SOP for CCTVs in SunGuide

BOSCH AutoDome 7000 HD

This Standard Operating Procedure is to provide a standard configuration for CCTV cameras in

District 5 for consistent operation in SunGuide, VLC and IVEDDS. Standard settings to check:

Network settings, Video/Encoder settings, SNTP (time server type), IP addresses, PTZ settings,

Date and Time, RTSP port, NTCIP (port and address), and On Screen Display (ODS).

The following SOP is for the BOSCH AutoDome 7000 HD (7230) IP camera.

Log into the camera, using Internet Explorer or Chrome to access the camera’s user interface.

Type in the default IP address.

Enter the following:

Enter the user name: <service>

Enter the password: <Default>

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Configuration”.

SOP for CCTVs in SunGuide

Click on “Network”.

Click on “Network Access”.

NOTE: Click Set/SAVE after every configuration setting for that window before moving to the

next menu item.

SOP for CCTVs in SunGuide

1. Network settings:

Set the following parameters for the “Network Access”.

DHCP is disabled <Off>

IP address <10.X.X.X>

Subnet mask <255.255.255.X>

Gateway <10.X.X.X>

SOP for CCTVs in SunGuide

Click “Set and Reboot”.

After Reboot, log into the camera, use Internet Explorer or Chrome to access the camera’s

user interface. Type in the assigned IP address.

Enter the following:

Enter the user name: <service>

Enter the password: <Default>

Click “OK”.

SOP for CCTVs in SunGuide

Click on “Configuration”.

Click on “Network.”

Click on “DynDNS.”

Set the following parameters for the “DynDNS” setting.

DynDNS is disabled <Off>

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Network.”

Click on “Advanced.”

SOP for CCTVs in SunGuide

Set the following parameters for the “Advanced” setting.

RTSP Port: < 554 >

NTCIP Port: < 4439 >

NTCIP Address: < 1 >

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Network”.

Click on “Network Management”.

Set the following parameters for the “Network Management” setting.

SNMP: < On >

UPnP: < Off >

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Network.”

Click on “Multicast”

Set the following parameters for the “Multicast” setting Stream 1 and Stream 2.

Enable: < check box >

Multicast Address: < If provided 232.219.X.X >

Port: (Stream 1) < 5554 >, (Stream 2) < 5556 >

Streaming: < check box >

Multicast packet TTL: < 64 >

(NOTE: The same multicast IP is used for both stream 1 and stream2)

Click “Set”.

Otros manuales de Cámara de seguridad de Bosch

Bosch

Bosch DINION IP 5000 Instrucciones de uso

Bosch

Bosch DINION IP starlight 6000 HD Manual de usuario

Bosch

Bosch EX72MX4V0922-N Manual de usuario

Bosch

Bosch WZ14 Manual de usuario

Bosch

Bosch EX40N Manual de usuario

Bosch

Bosch VG4-200 Series Manual de usuario

Bosch

Bosch MIC Series 440 Manual de usuario

Bosch

Bosch Diniop IP - NWC-0455 Manual de usuario

Bosch

Bosch MIC Series 500 Manual de usuario

Bosch

Bosch VEZ Series Guía

Bosch

Bosch VG5-7230-CPT5 Manual de usuario

Bosch

Bosch EX49 Manual de usuario

Bosch

Bosch MIC IP starlight 7000i Manual de usuario

Bosch

Bosch AN traffic 4000 IR Manual de usuario

Bosch

Bosch NDN-498 FlexiDome2X Manual de usuario

Bosch

Bosch DMExRMSxx Manual de usuario

Bosch

Bosch NDE-8503-R Manual de usuario

Bosch

Bosch AUTODOME 5000 PTZ Manual de usuario

Bosch

Bosch AutoDome 600 Series Manual de usuario

Bosch

Bosch NDP-7512-Z30C Manual de usuario

Bosch

Bosch AN bullet 2000 IR Manual de usuario

Bosch

Bosch VOT-320V0xxL Manual de usuario

Bosch

Bosch NDN-733 Manual de usuario

Bosch

Bosch FLEXIDOME IP micro 3000i-outdoor Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario