Bosch B443 Manual de usuario

Conettix Cellular Communicators

B44x

en Installation Manual

Conettix Cellular Communicators Table of contents | en 3

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

Table of contents

1Cellular module introduction 4

1.1 About documentation 4

1.2 Bosch Security Systems, Inc. product manufacturing dates 4

2Component overview 5

3Installation 7

3.1 Insert the SIM card 7

3.2 Install the antenna 7

3.3 Install the communicator 8

3.4 Remove the communicator 10

4Diagnostic LED descriptions 11

5Configuration 12

5.1 Activating the B440-C/B441-C 12

6Specifications 13

4en | Cellular module introduction Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

1 Cellular module introduction

This document contains supplemental information needed to install the Conettix Plug-in

Cellular communication modules.

This reference guide contains:

– Component location overview.

– Installation workflows.

– Diagnostic LED descriptions.

– Configuration.

– Specifications.

1.1 About documentation

This document is the intellectual property of Bosch Security Systems, Inc. and is protected by

Trademarks

All hardware and software product names used in this document are likely to be registered

trademarks and must be treated accordingly.

1.2 Bosch Security Systems, Inc. product manufacturing dates

Use the serial number located on the product label and refer to the Bosch Security Systems,

Inc. website at http://www.boschsecurity.com/datecodes/.

Conettix Cellular Communicators Component overview | en 5

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

2 Component overview

Cellular plug-in communicators provide IP communications over supported cellular networks

by directly connecting the communicator into a control panel or into an additional module

such as the Conettix Plug-in Communicator Interface or the Conettix Universal Dual Path

Communicator modules. Some communicators come with a SIM card holder.

Communicators without SIM cards

Callout - Description

1 - Module handle and support leg

2 - LEDs

3 - Threaded female SMA antenna connector

4 - Plug-in module retention clip opening

5 - PCB metal contacts

Notice!

The B440-C/B441-C communicators must be activated and have a valid cellular plan for

proper usage. Refer to Activating the B440-C/B441-C, page 12 for details.

6en | Component overview Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

Communicators with SIM cards

Callout - Description

1 - Module handle and support leg

2 - SIM card holder

3 - LEDs

4 - Threaded female SMA antenna connector

5 - Plug-in module retention clip opening

6 - PCM metal contacts

Conettix Cellular Communicators Installation | en 7

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

3 Installation

When installing the communicator into a supporting module or control panel, refer to the

compatible documentation for more information.

Caution!

Remove all power (AC and battery) before making any connections. Failure to do so might

result in personal injury and/or equipment damage.

3.1 Insert the SIM card

Follow these instructions for SIM card installation.

1. Break away the SIM card from the die-cut.

2. Insert the SIM card into the SIM card holder by sliding it into the card holder.

3. Make sure the gold contact side of the SIM card is against the module.

Figure3.1: Inserting the SIM card

3.2 Install the antenna

1. Put the magnetic antenna on top of the enclosure, or vertically on another metal surface.

2. Put the antenna cable through a knockout.

3. Connect the antenna cable to the module.

4. Make sure the antenna cable is inside the enclosure.

8en | Installation Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

Figure3.2: Installing the antenna

Callout - Description

1 - Antenna routed through any knockout

2 - Antenna cable connected to the module

3.3 Install the communicator

Control panel/universal dual path communicator installation

1. Put the support leg into the support hole labeled X. Refer to Figure 3.3.

2. Align the PCB metal contacts with the on-board connector.

3. Push the module into place. The retention clip snaps closed and secures the module in

place.

Conettix Cellular Communicators Installation | en 9

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

Figure3.3: Communicator installation (B6512 control panel shown)

Callout - Description

1 - Support leg inserted into the compatible device support holes

2 - PCB metal contacts resting on the on-board connector

3 - Plug-in communicator retention clip

Plug-in communicator interface installation

1. Insert the communicator into the slot of the plug-in communicator interface.

2. Push in until you feel it "click" into place.

Figure3.4: Communicator installation (B450 shown)

10 en | Installation Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

Callout - Description

1 - SIM card insertion (if applicable)

2 - Communicator

3 - Plug-in communicator interface

3.4 Remove the communicator

1. Hold the plug-in module retention clip open.

2. Hold the top corners of the module support handle with your other hand.

3. Pull the module out.

Otros manuales para B443

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Bosch

Bosch

Bosch Rexroth DB 5X E Series Manual de usuario

Bosch

Bosch TouchOne Manual de usuario

Bosch

Bosch KTS 5 Series Manual de usuario

Bosch

Bosch FLM-420-NAC-D Manual de usuario

Bosch

Bosch Rexroth IndraControl Manual de usuario

Bosch

Bosch D8125 Guía de inicio rápido

Bosch

Bosch Professional GCY 42 Instrucciones de montaje

Bosch

Bosch CONNECT RLDP-V Manual de usuario

Bosch

Bosch KTS 5a Series Manual de usuario

Bosch

Bosch Rexroth ID 200/C-PDP Manual de usuario

Bosch

Bosch DS7432 Manual de usuario

Bosch

Bosch AMC2 4W-EXT Manual de usuario

Bosch

Bosch Professional GCY 42 Manual de usuario

Bosch

Bosch Sensortec Application Board 3.0 Manual de usuario

Bosch

Bosch IOS 0232 A Manual de usuario

Bosch

Bosch FLM-420-01 Manual de usuario

Bosch

Bosch Rexroth 3DREP 6 XE Series Manual de usuario

Bosch

Bosch B426 Instrucciones de funcionamiento

Bosch

Bosch Rexroth LFA DB Series Manual de usuario

Bosch

Bosch Rexroth H-4WEH...XE Series Manual de usuario

Bosch

Bosch Rexroth SM 12 Instrucciones de funcionamiento

Bosch

Bosch Rexroth IndraControl S67 Series Guía del usuario

Bosch

Bosch MS 6 Manual de usuario

Bosch

Bosch Junkers MB LAN Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario