BORK M783 Manual de usuario

783

MEAT GRINDER M783

USER MANUAL

PROFESSIONAL STAINLESS STEEL BLADES

The system consists of 2 professional blades; a separator blade for preparing

meat for processing, a main blade and the cutting plate.

This ensures high-quality results in the form of professionally ground meat.

UNIQUE “SMART LOCK” MOUNTING SYSTEM

The design ensures no leeway or vibration during operation: assembling takes

a single push, the head ﬁrmly sets in place, ﬁxed to the base. An integral part

of the device is the electromagnetic sensor, which allows the unit to recognize

proper head installation and to stop its use when the head is not installed.

Thedirect drive system which connects the screw feed to the reductor ensures

high quality and reliability.

My BORK

You will get quick access to instructions, accessories, spare parts and reminders

for consumables replacement.

4 5

INTELLIGENT AUTO-REVERSE

The ﬁrst meat grinder on the market with an automatic reverse function

when there are difﬁculties during meat processing. This reliably protects

the motor from failure, as well as eliminating the need for manual reverse.

LOW NOISE

The motor runs so quietly that you can use the appliance without disturbing those

around you.

Head Assembly

Tray

Plunger

The loading part

Rotary switch for operating mode selection—

button for removing the head

Motor block

Rubber feet

6 7

Lock piece for cutting plate

Screw feed Separator blade

3 mm 4 mm 7 mm

Cutting Plate Blade

3 mm grating is recommended for the preparation

ofpâtés and ﬁllings for various ﬁsh and meat snacks.

4 mm grating grid is recommended for mincing beef,

lamb and poultry meat, as well as vegetables, hard

and semisolid cheeses.

7 mm grating is recommended for making home

sausages, minced pork, as well as for grinding dried

fruits, hard and semisolid cheeses.

Plunger Cutting plate

cleaning tool

Tool for unscrewing the cutting

plate lock

Chopping blade Grating blade

Lock piece for vegetable

cutting attachments

First attachment set for sausages

Vegetable

cutter Second attachment set for sausages

Plunger

8 9

CONTROL PANEL

— manual reverse function

(back motion)

— turning off the appliance

— speed 1

— speed 2

— еject button for removing the head

— selector

Before the ﬁrst use, thoroughly wash the screw feed,

blade, head for the meat, head for the vegetables,

allattachments for the sausages, the tray, all

thecutting plates and the plunger under running

water. Dryallparts.

ASSEMBLY

• The meat grinder should be disconnected from

thepower outlet.

• Place the screw feed inside the meat grinder head.

• Place the separator blade on the screw feed

withcutting edges outwards.

• Then place the blade with the cutting edges

outwards.

• Put the cutting plate onto the screw feed –

small, medium or large, depending on desired

consistency.

Make sure that the ledge on the head is lined up

with the slot on the cutting plate.

• Tighten clockwise.

SMART LOCK system

• To install the head place the assembly

intothegrooves and press towards the body until

you hear a click.

• Place the tray on top of the head assembly.

Disassembling

• Before disassembling, disconnect the meat grinder

from the power outlet.

• To detach the head, press the button,

thenremove it by pulling on the head assembly

away from the body.

• Unscrew the lock piece of the cutting plate

counter-clockwise using the tool.

• Then remove the cutting plate, the blade

andthescrew feed.

10 11

VEGETABLE CUTTER

• Insert the required grating or chopping blade

intothe feed part for vegetables.

• Install the blade lock piece by turning it to the right

into the position.

• To install the head; place the assembly into

thegrooves and press towards the body until you

hear а click.

Grating blade

Vegetable Plunger

Lock piece for vegetable

cutter heads

Chopping blade

First attachment set for sausages

Lock piece for cutting plate

Second attachment set for sausages

12 13

THE SAUSAGE SETS

Use a natural shell: pork or lamb casings.

Rinsetheshell in the running water from theoutside

and inside, ﬁll water for 5–7 minutes toget rid

ofexcess salt and ensure elasticity.

• Install the necessary heads onto the screw feed

according to the diagram.

• Tighten the lock piece ﬁrmly and place the feed tray

onto the feed part.

• Attach the sausage casing to the head mounted

onthe meat grinder.

• Use plunger to feed chopped meat or minced

meat to the feed part, in portions. Control the ﬁlling

ofthecasing, holding it by hand.

First attachment set

Designed for preparing home-made sausages.

Second attachment set

Used for cooking kebabs and sausages.

OPERATION

• Prepare the meat for processing by removing

bones, soft tendons and sinew, then slicing it.

• Install the head assembly onto the meat grinder.

• Connect the grinder to the power outlet.

• To turn on the meat grinder, turn the switch

totheposition – Speed 1.

• To increase the speed, turn the switch clockwise

tothe — Speed 2.

Two speeds of operation ensure that the meat

grinder selects the correct speed for each type

ofmeat:

Speed 1 — chicken, ﬁsh, berries;

Speed 2 — turkey, pork, beef, lamb, game meat.

Put the meat into the feed part.

DO NOT push products into the feed part using

objects other than the plunger.

• To stop the appliance, turn the switch

tothe position.

REVERSE

• If the rotation has slowed due to solid products,

move the regulator to position tostop the meat

grinder.

• Move and hold the regulator to the position ,

to start the reverse rotation (reverse).

Aftertheregulator returns to the position

themeat grinder stops the reverse rotation.

• Turn the regulator to the or position torestart

the meat grinder.

14 15

RULES FOR CONNECNING

TO THE POWER OUTLET

• Do not touch the power plug with wet hands.

• Connect the device only to a grounded outlet.

When disconnecting the appliance from the power

outlet, do not pull on the cord; pull only on the plug.

CLEANING

• Before cleaning, disconnect the meat grinder from

the power outlet.

• Wash all detachable parts thoroughly under running

water using a mild detergent. Thenrinse and wipe

with a soft dry cloth.

• Wipe the outer part of the meat grinder housing

with a damp cloth and soapy water. Dry with a soft

cloth.

• For a faster and easier cleaning of the cutting

plates, use the special cleaning tool.

• After cleaning, grease the blade and cutting plates

with vegetable oil.

To prevent rusting, the blade and cutting plates should

be wiped dry.

After cleaning, grease the blade and plates

withvegetable oil.

Do not wash the feed part and removable parts

inthedishwasher.

ANODIZED COATING CARE

Do not use tools with abrasive particles, citric acid,

hard sponges and wire brushes in the cleaning

process.

Chemically aggressive compounds,

alkalinedetergents have a destructive effect

ontheanodized surface.

STORAGE

It is recommended to store the device in its

assembled form, in a dry, cool place, away from

acids and bases, at a temperature of 5 to 30 °C

anda relative humidity below 65 %.

Do not expose the unit to signiﬁcant temperature

changes and/or direct sunlight.

16 17

SAFETY MEASURES

• Before operating the meat grinder, carefully

read and save this manual to be able to refer

toitinthefuture.

• Before the ﬁrst use, wash all the removable parts

ofthe meat grinder.

• Before operating the device, make sure that

thepower supply characteristics correspond

tothose indicated on the device’s rating label.

• Connect the device only to a grounded outlet.

Intheabsence of grounding performed

inaccordance with local regulations,

themanufacturer (the person authorized

bythemanufacturer) shall not be liable fordamages.

• Install the meat grinder only on a dry, ﬂat surface.

• Keep the meat grinder housing clean. When

cleaning, follow the instructions in the «Cleaning»

section.

• Cutting plates for minced meat, blades, sets

forsausages, lock pieces, screw feed andscrew

feed safety lock have natural wear and tear,

theservice life depends on the frequency

andaccuracy of use.

• Do not allow clothing, hair, ﬁngers, etc. into

themeat grinder. This is hazardous to health.

• This appliance is not intended for use

bypersons (including children) with limited

sensory orintellectual capabilities, or persons

with insufﬁcient experience and knowledge

oftheappliance.

• Always disconnect the meat grinder from the power

outlet after use, before assembly, disassembly,

andbefore cleaning the appliance.

• Do not touch the moving parts of the meat grinder

during its operation.

• Before connecting to the power supply, make

sure that the unit is assembled according

totheinstructions, see the "Assembly" section.

• Do not immerse the meat grinder housing

withthemotor or the power cord into water, donot

wash under a tap. Do not allow moisture into

themotor compartment.

• During the operation of the meat grinder,

itisprohibited to push products using ﬁngers

orforeign objects — use the plunger provided

withthe unit.

• Do not leave the meat grinder unattended.

• Do not overload the meat grinder. If clogged,

immediately stop the grinder and clean

thescrew feed, and the blade from the remnants

oftheproducts.

• Do not use frozen food for processing in the meat

grinder.

• It is forbidden to grind bones, nuts and other solid

products.

• The meat must ﬁrst be separated from bones, soft

tendons, sinew, veins.

• Do not allow foreign objects and/or liquids

into thehousing of the appliance, this can lead

todamage.

• Do not wash the feed part and removable parts

inthe dishwasher.

• When disconnecting the appliance from the power

outlet, do not pull the cord, pull only on the plug.

• Keep the appliance in a clean, dry and cool place,

out of the reach of children.

• To prevent rusting, the blade and cutting plates

should be wiped dry.

• This device is designed for home use.

• Do not remove or damage the rating label

withinformation about the appliance anditsserial

number. It is necessary for the accurate

identiﬁcation of the appliance in the event

ofa malfunction.

• Transportation of the product is allowed only

intheoriginal packaging, as well as in the ﬁxed

position.

• Dispose of the device in accordance with the laws

and regulations of the local government.

TROUBLESHOOTING

• Upon detecting any malfunctions in the appliance,

immediately discontinue the use and transfer

ittothe nearest BORK service center for testing,

replacement or repair.

• For safety reasons, all service, repair and

maintenance of the device must be performed only

by BORK authorized service centers. Addresses

and phone numbers of service centers can be

found on the site www.bork.ru or by calling

8 800 500 88 99.

Tabla de contenidos

Otros manuales de Picadora de carne de BORK

BORK

BORK M782 Manual de usuario

Manuales populares de Picadora de carne de otras marcas

Klarstein

Klarstein Mett Max Manual de usuario

Grizzly

Grizzly H7778 Manual de usuario

Hobart

Hobart 4822 Manual de usuario

Tasin

Tasin TS-108 Manual de usuario

Adler Europe

Adler Europe AD 48 Manual de usuario

camry

camry CR 4802 Manual de usuario

Bake Max

Bake Max BMMG001 Manual de usuario

Lumme

Lumme LU-MG2113A Manual de usuario

Weston

Weston 35-3201 Manual de usuario

Lumme

Lumme LU-2101 Manual de usuario

GoWISE USA

GoWISE USA GW88012 Manual de usuario

MPM

MPM MMM-07M Manual de usuario

Weston

Weston 82-0101-W Manual de usuario

BIRO

BIRO 3334SS Manual de servicio

HOFFEN

HOFFEN MG-0440 Manual de usuario

Scarlett

Scarlett SC-MG45M18 Manual de usuario

Adcraft

Adcraft MG-1 Manual de usuario

Johnson

Johnson tomit Manual de usuario