BEFORE BEGINNING THIS OR ANY OTHER EXERCISE PROGRAM, CONSULT A PHYSICIAN.
THE PHYSICIAN CAN HELP YOU BETTER DETERMINE WHAT ACTIVITIES OR PROGRAMS
ARE MOST SUITED FOR YOU. IF AT ANY TIME DURINGTHE WORKOUT YOU FEELING FAINT,
OR CHEST PAINS, OR SEVER SHORTNESS OF BREATH, STOP EXERCISING IMMEDIATLELY
AND CONSULT A PHYSICAN.
The M20X Console assembly consists of a computer console, a magnet, one chest belt, and a
speed sensor transmitter. The sensor in the transmitter counts the number of times the
magnet (mounted on the crank or flywheel) passes the sensor. The speed sensor transmitter
will then transmit a coded signal to the console, which contains the measured value (Speed
and Cadence).
1. Ensure the Console Clamp is securely mounted on the back of the console.
Insert the mounting screw through the Console Clamp.
2. Spread the clamp bracket apart, then clamp it back together over the top center
of the handlebar.
3. Turn the screw bar downward, slightly tighten the screw and adjust the console
for optimal Visibility. Once the console is adjusted, continue to tighten the screw until
it is securely attached to the handle bar.
2.1.
3.
IMPORTANT SAFETY INSTRUCTIONS WARNING
CONSOLE INSTALLATION
M20X · CONSOLE INSTRUCTION MANUAL ENG
