Blue Technix DEV-BF548-Lite Instrucciones de uso

Tinyboards from Bluetechnix

www.bluetechnix.com

Hardware User Manual

DEV-BF548-Lite

DEV-BF548DA-Lite

Board V1.1

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManual

Contact

Bluetechnix Mechatronische Systeme GmbH

Waidhausenstr. 3/19

A-1140 Vienna

AUSTRIA/EUROPE

[email protected]

http://www.bluetechnix.com

Document No.: 100-2246-1.0

Document Revision 11

2009-02-04

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManual

Table of Contents

1Introduction ......................................................................................................................... 1

1.1Overview....................................................................................................................... 1

2Functional Specification...................................................................................................... 4

3PCB Placement and Mechanical Outline............................................................................. 5

3.1PCB Placement ............................................................................................................. 5

3.2Mechanical Outline....................................................................................................... 6

3.3Extension Board Footprint............................................................................................ 6

4Connector Description......................................................................................................... 8

4.1X4 –RJ45 Ethernet Connector...................................................................................... 8

4.2X9 –SD-Card Connector (bottom Mount).................................................................... 8

4.3X6 – JTAG Bypass Connector...................................................................................... 8

4.4X11 – USB-UART Connectors .................................................................................... 8

4.5X12 UART Expansion Pads ......................................................................................... 9

4.6X1, X2, X3 Expansion Connectors............................................................................... 9

4.7X8, X10 – CAN1, CAN0 Connector............................................................................ 9

4.8X5 – Power Connector.................................................................................................. 9

4.9Expansion Connectors ................................................................................................ 10

4.9.1X2 – Expansion Connector 2 ............................................................................... 10

4.9.2X1 – Expansion Connector 1 ............................................................................... 12

4.9.3X3 – Expansion Connector 3 ............................................................................... 13

5Switches, Jumper and LED Description............................................................................ 16

5.1S1 – Reset switch........................................................................................................ 16

5.2S2 – Ethernet Control Signals / SDCARD CS............................................................ 16

S3 – UART Switch ............................................................................................................... 16

5.3S4 – Boot Configuration............................................................................................. 16

5.4JP1 – Ethernet Speed Selection................................................................................... 16

5.5JP2 -– Power Supply Jumper...................................................................................... 16

5.6JP3 – RTC Power Jumper........................................................................................... 17

5.7JP4 – USB ID.............................................................................................................. 17

5.8S5 - Button.................................................................................................................. 17

5.9General Purpose LEDs................................................................................................ 17

5.10Ethernet LEDs ......................................................................................................... 17

5.11LEDs of the Debug Agent....................................................................................... 17

6Boot Mode Description ..................................................................................................... 18

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManual

7Installation......................................................................................................................... 19

7.1Initial Board Setup...................................................................................................... 19

7.2Debug Agent Setup (DEV-BF548DA-Lite only)....................................................... 22

8Using the VDSP Flash Programming Tool....................................................................... 27

8.1Developing an Application......................................................................................... 27

8.2Overwriting BLACKSheep Code............................................................................... 27

9Extender Board Compatibility List.................................................................................... 28

9.1Without Extender Board............................................................................................. 28

9.2EXT-BF5xx-EXP........................................................................................................ 28

9.3EXT-BF5xx-Video ..................................................................................................... 28

9.4Audio Extender Board ................................................................................................ 29

9.5Camera Extender Board.............................................................................................. 29

9.6Analog-Digital / Digital-Analog Converter Extender Board...................................... 29

9.7USB-ETH Extender Board ......................................................................................... 29

9.8Video and Audio Extender Board............................................................................... 29

9.9Camera and Audio Extender Board............................................................................ 30

10Anomalies....................................................................................................................... 31

11Product Changes............................................................................................................. 32

12Document Revision History........................................................................................... 33

AList of Figures and Tables................................................................................................. 34

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManual

Packing List

The DEV-BF548DA-Lite and the DEV-BF548-Lite Board Package contain the following

items:

1. DEV-BF548DA-Lite or DEV-BF548-Lite Board

2. 1x USB Cable (USB A/B)

3. 1x USB Cable (USB A/B) (DEV-BF548DA-Lite only)

4. 1x USB Cable (USB A/Mini USB)

5. 1x Ethernet Cable

6. 1x Power Supply.

7. Support CD

Note: The Core Modules are not shipped with the board, so you must order them separately.

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManual

Edition 2007-02

The information herein is given to describe certain components and shall not be considered as

a guarantee of characteristics.

Terms of delivery and rights of technical change reserved.

We hereby disclaim any warranties, including but not limited to warranties of non-

infringement, regarding circuits, descriptions and charts stated herein.

Bluetechnix makes and you receive no warranties or conditions, express, implied, statutory or

in any communication with you. Bluetechnix specifically disclaims any implied warranty of

merchantability or fitness for a particular purpose.

Bluetechnix takes no liability for any damages and errors causing of the usage of this board.

The user of this board is responsible by himself for the functionality of his application. He is

allowed to use the board only if he has the qualification. More information is found in the

General Terms and Conditions (AGB).

Information

For further information on technology, delivery terms and conditions and prices please

contact Bluetechnix (http://www.bluetechnix.com).

Warnings

Due to technical requirements components may contain dangerous substances.

The Core Modules and development

systems contain ESD (electrostatic

discharge) sensitive devices. Electro-

static charges readily accumulate on

the human body and equipment and

can discharge without detection.

Permanent damage may occur on

devices subjected to high-energy

discharges. Proper ESD precautions

are recommended to avoid

performance degradation or loss of

functionality. Unused Core Modules

and Development Boards should be

stored in the protective shipping

package.

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManual

BLACKFIN Products

Core Modules:

CM-BF533: Blackfin Processor Module powered by Analog Devices single core

ADSP-BF533 processor; up to 600MHz, 32MB RAM, 2MB Flash,

120 pin expansion connector and a size of 36.5x31.5mm

CM-BF537E: Blackfin Processor Module powered by Analog Devices single core

ADSP-BF537 processor; up to 600MHz, 32MB RAM, 4MB Flash,

integrated TP10/100 Ethernet physical transceiver, 120 pin expansion

connector and a size of 36.5x31.5mm

CM-BF537U: Blackfin Processor Module powered by Analog Devices single core

ADSP-BF537 processor; up to 600MHz, 32MB RAM, 4MB Flash,

integrated USB 2.0 Device, 120 pin expansion connector and a size

of 36.5x31.5mm (will be replaced by CM-BF527).

TCM-BF537: Blackfin Processor Module powered by Analog Devices single core

ADSP-BF537 processor; up to 500MHz, 32MB RAM, 8MB Flash,

28x28mm, 120 pin expansion connector, Ball Grid Array or Border

Pads for reflow soldering, industrial temperature range -40°C to

+85°C.

CM-BF561: Blackfin Processor Module powered by Analog Devices dual core

ADSP-BF561 processor; up to 2x 600MHz, 64MB RAM, 8MB

Flash, 120 pin expansion connector and a size of 36.5x31.5mm.

CM-BF527: The new Blackfin Processor Module is powered by Analog Devices

single core ADSP-BF527 processor; key features are USB OTG 2.0

and Ethernet. The 2x60 pin expansion connectors are backwards

compatible with other Core Modules.

CM-BF548: The new Blackfin Processor Module is powered by Analog Devices

single core ADSP-BF548 processor; key features are 64MB DDR

SD-RAM 2x100 pin expansion connectors.

Development Boards:

EVAL-BF5xx: Low cost Blackfin processor Evaluation Board with one socket for

any Bluetechnix Blackfin Core Module. Additional peripherals are

available, such as an SD-Card.

DEV-BF5xxDA-Lite: Get ready to program and debug Bluetechnix Core Modules with this

tiny development platform including a USB Based Debug Agent. The

DEV-BF5xxDA-Lite is a low cost starter development system

including VDSP++ Evaluation Software License.

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManual

DEV-BF5xx-FPGA: Blackfin Development Board with two sockets for any combination

of Blackfin Core Modules. Additional peripherals are available, such

as SD-Card, Ethernet, USB host, multi-port JTAG including a USB

based Debug Agent, connector for an LCD-TFT Display and

connector for a digital camera system. A large on-board SPARTAN-3

FPGA and Soft IPs make this board the most flexible Blackfin

development platforms ever developed.

DEV-BF548DA-Lite: Get ready to program and debug Bluetechnix CM-BF548 Core

Module with this tiny development platform including a USB Based

Debug Agent. The DEV-BF548DA-Lite is a low cost starter

development system including VDSP++ Evaluation Software

License.

EXT-Boards: The following Extender Boards are available: EXT-BF5xx-Audio,

EXT-BF5xx-Video, EXT-BF5xx-Camera, EXT-BF5xx-Exp, EXT-

BF5xx-ETH-USB, EXT-BF5xx-AD/DA. Additional boards based on

customer request are also available.

Software Support:

BLACKSheep: The BLACKSheep VDK is a multithreaded framework for the

Blackfin processor family from Analog Devices that includes driver

support for a variety of hardware extensions. It is based on the real-

time VDK kernel included within the VDSP++ development

environment.

LabVIEW: LabVIEW embedded support for the CM-BF537E, CM-BF537U and

TCM-BF537 Core Modules is based upon the BLACKSheep VDK

driver Framework.

uClinux: All the Core Modules are fully supported by uClinux. The required

boot loader and uClinux can be downloaded from:

http://blackfin.uClinux.org.

Upcoming Products and Software Releases:

Keep up-to-date with all the changes to the Bluetechnix product line and software updates at:

www.bluetechnix.com

BLACKFIN Design Service

Based on more than five years of experience with Blackfin, Bluetechnix offers development

assistance as well as custom design services and software development.

  Tinyboards

maximumperformanceatminimumsize

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManualPage1

1 Introduction

NOTE: The DEV-BF548DA-Lite has an on-board Debug Agent, which is not available on the

DEV-BF548-Lite Board. All other features are identical! In this document, when describing

both boards, the name DEV-BF548-Lite is used.

The DEV-BF548-Lite Development Board with integrated Debug Agent is designed as a

development and application board for the high performance ADSP-BF548 based CM-BF548

Core Module. Special feature of the board is the 10/100Mbit industrial Ethernet controller.

The integrated Debug Agent is a USB based debug interface which enables programming and

debugging of the Blackfin Core Modules. It is fully compatible with the Visual DSP++

development environment. The development board provides all interfaces on dedicated

connectors or expansion connectors. Extender boards can be plugged on top of the

Development Board in order to enable additional interfaces.

1.1 Overview

The DEV-BF548-Lite Board includes the following components:

60 Pin Expansion Connector 2

USB to

UART

CM-BF548

64MB DDR SD RAM

8MB Flash

SD-Card

60 Pin Expansion Connector 1

CAN

DEBUG

AGENT USB-OTG

10/100Mbit

(Ethernet

Controller)

DC/DC

Power Supply

(5V and 3V3)

Figure 1-1: Overview of the DEV-BF548-Lite Board

DC/DC Converters

o5V@2A

o[email protected] (draws its power from the 5V output of the DC/DC)

1 Core Module Slot

oSupports the CM-BF548 Core Module

USB-to-UART Port

  Tinyboards

maximumperformanceatminimumsize

BlackfinDEV‐BF548‐Lite&DEV‐BF548DA‐LiteHardwareUserManualPage2

oSupports up to 915kbps UART-USB conversion.

oEmulates a standard COM port on the computer.

oDrivers for Windows and Linux available

JTAG

oJTAG-Plug that supports all analog Devices JTAG Emulators.

Expansion Connector 1 (X1)

oData Bus

oAddress Bus

oMemory Control

oRESET

oPPI0 (Parallel Port Interface 0)

oGPIO (Programmable )

oPower Supply

Expansion Connector 2 (X2)

oPPI1 (Parallel Port Interface 1), SPORT1

oPower Supply (Main Supply Connector)

oGPIO (Programmable )

oUART0

oSPI2

Expansion Connector 3 (X3)

oATAPI Interface

oSPI0, SPI1

oSPORT2, SPORT3

oCAN 0, CAN1

oUART2, UART3

oPPI0 (Sync, D16,D17))

oSDIO Interface

oGPIO (Programmable )

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de Blue Technix

Blue Technix

Blue Technix Sentis-ToF-M100 Manual de usuario

Blue Technix

Blue Technix DEV-BF548-Lite v1.x Instrucciones de uso

Blue Technix

Blue Technix CM-i.MX27-C-C-Q26S128F32N512 Instrucciones de uso

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario