Blue Ox BX1133 Manual de usuario
BX1133
2012 Jeep Wrangler Unlimited Call of Duty
Installation Instructions
405-00281 Page 1 of 5 8/31/12
Please read BOTH these Installation Instructions and the General Instructions
prior to installing or operating this equipment.
1. Blue Ox®towing products and accessories are
intended to be installed by Blue Ox® Dealers
who are familiar with our products and have the
equipment and knowledge necessary to do “t
work”. If needed, Blue Ox®Dealers can be found
at www.blueox.com or by contacting our Customer
Care Department at (402) 385-3051.
2. Many Blue Ox®baseplates are designed to
use existing holes and hardware to mount the
baseplate to the towed vehicle. Even though bolts
are there, do not assume they are adequate for
baseplate mounting. Always use the hardware
supplied in the hardware kit and existing hardware
as specied in the installation instructions.
Reference your vehicle owner’s
manual for manufacturer’s towing
specications.
Approximate Attachment Tab Height: 18”
Approximate Attachment Tab Width: 24”
Bolt Size Grade 5 Grade 8
1/4” 10 14
5/16” 19 29
3/8” 33 47
7/16” 54 78
1/2” 78 119
5/8” 154 230
Bolt Torque Specications
Torque in Foot-Pounds for Inch Bolts
Bolt Torque Specications
Torque in Foot-Pounds for Metric Bolts
Bolt Size Grade 8.8 Grade 10.9
6MM 6 8
8MM 16 22
10MM 31 40
12MM 54 70
14MM 89 117
Serial Number
If the front of your vehicle looks different than
this, please contact us at (402)385-3051. !
Failure to read and follow these instructions
could result in separation of the towed vehicle
from the tow bar, causing property damage,
loss of towed vehicle, personal injury or death.
WARNING
BX1133
2012 Jeep Wrangler Unlimited Call of Duty
Installation Instructions
405-00281 Page 2 of 5 8/3112
The dimensional variations between otherwise identical vehicles can be considerable. While the
baseplate was designed for easy installation, it may be necessary to tailor the baseplate slightly to
compensate for vehicle manufacturer’s tolerances. These minor adjustments may include ling a hole
slightly, bending electrical rods or bending end plates.
The BX8869 Tail Light Wiring Kit is recommended for this vehicle.
NOTICE
• Handling of some cosmetic parts when installing this product may require the use of protective
covers, rags, specialty tools, etc. to prevent damage.
• When using power drills be aware of the dangers of torque and drill bit length.
• Be sure that ALL electrical connections are plugged in properly and functioning before
reinstalling the fascia.
• Do not use the towed vehicle for storing luggage, equipment, etc. This may cause you to
exceed the towing capacity of the tow bar, baseplate and its accessories.
• Be sure to use Loctite®Red on all bolts before tightening. Tighten all bolts according to the
torque chart provided.
Drill a 1” hole to install the 3 wire
automotive socket.
BX1133
2012 Jeep Wrangler Unlimited Call of Duty
Installation Instructions
405-00281 Page 3 of 5 8/3112
1
3
2
4
5
Item No. Part No. Description Qty.
1.................................61-7064.............................BX1133 Baseplate...........................................................1
2.................................107-3359...........................1” OD x 7/32” ID x 1/2” Long Spacer Tube......................2
3.................................201-0068...........................1/2”-13 x 1-3/4” Hex Head Bolt, Grade 5, ZP ..................4
4.................................203-0005...........................1/2” Flat Washer, ZP........................................................2
5.................................203-0012...........................1/2” Lock Washer, ZP ......................................................4
6.................................226-0046(not shown)........Class III Safety Cables....................................................2
7.................................229-0359(not shown)........3/8” Quicklink, ZP ............................................................2
Tools Required
Large Vise Grip
Rubber Mallet
Torque Wrench
Tape Measure
Drill
Loctite®RED
13MM Socket
BX1133
2012 Jeep Wrangler Unlimited Call of Duty
Installation Instructions
405-00281 Page 4 of 5 8/3112
3. If installing a breakaway switch, use
a 13MM socket to remove one (1)
of the existing bolts on either side of
the bumper.
1. Align the baseplate between the
bumper brackets. Insert one (1) of
the 1/2”-13 x 1-3/4” hex head bolts
and 1/2” lock washers in the bottom
hole and tighten securely. Do this
on both sides.
2. Using a rubber mallet, insert the
spacer tube into the top hole until
it is ush with the hole. Insert one
(1) of the 1/2”-13 x 1-3/4” hex head
bolts, 1/2” lock washers and 1/2” at
washers and tighten securely. Do
this on both sides.
4. Align the hole of the breakaway
switch bracket and use the
fasteners provided.
BX1133
2012 Jeep Wrangler Unlimited Call of Duty
Installation Instructions
405-00281 Page 5 of 5 8/3112
CUSTOMER SERVICE COMMITMENT
Blue Ox® is committed to providing you with exceptional customer care throughout the lifetime of your
products. Our team is here to assist you with any questions you may have regarding the performance
of your product. Simply call (402) 385-3051to speak with a member of our Custmer Care team.
Additionally, please visit our website to see which rallies our Destination America team will be
attending. For a nominal fee, our service technician will service your towing system to insure it is in
proper working condition. As a commitment to our customers, should you visit our factory, you can
stay at our full service Blue Ox® campground at no charge along with enjoying a factory tour.
Again, thank you for being a Blue Ox® customer and for the condence you have shown in the
performance of our products. It is because of customers like you that we enjoy the success we have
today.
© 2012 Blue Ox
One Mill Road, Industrial Park
Pender, Nebraska 68047
Phone: (402) 385-3051
Fax: (402) 385-3360
www.blueox.com
5. Attach the permanent baseplate safety cables to the provided convenience link on the baseplate.
Additional options may interfere with suggested mounting; in this case, secure the cables to a
solid piece of the frame as described in the instructions included with the permanent baseplate
safety cables. Be sure the safety cables do not rub against any hoses or moving parts. Do this on
both sides of the vehicle.
Otros manuales de Accesorios para automóviles de Blue Ox
Blue Ox
Blue Ox BX1126 Manual de usuario
Blue Ox
Blue Ox SportCarrier II Hoja de especificaciones
Blue Ox
Blue Ox BX7365 Manual de usuario
Blue Ox
Blue Ox BX3772 Manual de usuario
Blue Ox
Blue Ox TRION BX7520P Manual de usuario
Blue Ox
Blue Ox BX1958 Manual de usuario
Blue Ox
Blue Ox BX2711 Manual de usuario
Blue Ox
Blue Ox BX3216 Manual de usuario
Blue Ox
Blue Ox BX1141 Manual de usuario
Blue Ox
Blue Ox BX1117 Manual de usuario
Blue Ox
Blue Ox BX1136 Manual de servicio
Blue Ox
Blue Ox BX3776 Manual de usuario
Blue Ox
Blue Ox BX2800 Manual de usuario
Blue Ox
Blue Ox BX1719 Manual de usuario
Blue Ox
Blue Ox BX4102 Manual de usuario
Blue Ox
Blue Ox Patriot BRK2010 Manual de usuario
Blue Ox
Blue Ox ADVENTURER BX7322 Manual de usuario
Blue Ox
Blue Ox AVENTA II Manual de usuario
Blue Ox
Blue Ox BedSaver BXR4102 Manual de usuario
Blue Ox
Blue Ox bx1126 Manual de usuario
