Blizzard Lighting COLORISE Infiniwhite Manual de usuario

Blizzard Lighting, LLC

www.blizzardlighting.com

Waukesha, WI USA

Universal Wireless DMX

Page 2

TABLE OF CONTENTS

Colorise™ Inniwhite 1

1. Getting Started 3

What’s In The Box? 3

Getting It Out Of The Box 3

Powering Up! 3

Getting A Hold Of Us 3

Safety Instructions (Don’t run with scissors!) 4

2. Meet The Colorise™ Inniwhite LED Par 5

Main Features 5

DMX Quick Reference 5

The Colorise™ Inniwhite Pin-up Picture 6

3. Setup 7

Connecting A Bunch Of Colorise™ Inniwhite Fixtures 7

Data/DMX Cables 7

Setting the DMX Input Connector as the Active DMX Input 7

Cable Connectors 8

3-Pin??? 5-Pin??? Huh? 8

Take It To The Next Level: Setting up DMX Control 8

Fixture Linking (Master/Slave Mode) 9

Mounting/Rigging 9

Using the AnyFi™ Wireless DMX Receiver 10

Setting the Fixture to Receive Wireless Signal 10

Resetting The Wireless 10

Select W-DMX™ or Standard 2.4GHz Receiver 10

Successful W-DMX™ Connections 11

Standard 2.4GHz Mode: Selecting the Channel Group 11

4. Operating Adjustments 12

Navigating The Control Panel 12

Control Panel Menu Structure 13

DMX Mode 14

Set the Starting DMX Address 14

Setting the DMX Channel Mode 14

Slave Mode 14

Dimming Mode Settings 14

LED Display On/Off and Menu Lock 14

Custom Programs 15

Auto and Sound Active Modes 15

Color Calibration Settings 16

Custom Static Colors & Preset Colors 16

Fixture Reset Functions 17

Data Sync Feature 17

Fixture Information 17

DMX Value In-Depth Reference Guide 18

DMX In-Depth Reference 19

5. Appendix 20

A Quick DMX Lesson 20

Troubleshooting 20

Keeping Your Colorise™ Inniwhite As Good As New 21

Returns (Gasp!) 21

Shipping Issues 21

Tech Specs 22

Dimensional Drawings 23

Page 3

1. GETTING STARTED

What’s In The Box?

• 1 x Colorise™ Inniwhite Professional LED PAR Fixture

• An Ever-So-Handy Power Cord

• This Lovely User Manual

Getting It Out Of The Box

Congratulations on the purchase of your new totally sweet Colorise™ Inniwhite LED

par xture. She’s a real stunner alright, denitely the cat’s pajamas! Now that you’ve

got your Colorise™ Inniwhite (or hopefully, Colorises!), you should carefully unpack

the box and check the contents to ensure that all parts are present and in good condi-

tion. If anything looks as if it has been damaged in transit, notify the shipper immedi-

ately and keep the packing material for inspection. Again, please save the carton and

all packing materials. If a xture must be returned to the factory, it is important that

the xture be returned in the original factory box and packing.

Powering Up!

All xtures must be powered directly off a switched circuit and cannot be run off a

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer

channel is used solely for a 0% to 100% switch.

AC Voltage Switch - Not all xtures have a voltage select switch, so please verify that

the xture you receive is suitable for your local power supply. See the label on the

xture or refer to the xture’s specications chart for more information. A xture’s

listed current rating is its average current draw under normal conditions. Check the

xture or device carefully to make sure that if a voltage selection switch exists that it is

set to the correct line voltage you will use.

Warning! Verify that the voltage select switch on your unit matches the line

voltage applied. Damage to your xture may result if the line voltage applied

does not match the voltage indicated on the voltage selector switch. All

xtures must be connected to circuits with a suitable Ground (Earthing).

Getting A Hold Of Us

If something is wrong, just give us a call. We’ll be happy to help, honest.

Blizzard Lighting

N16 W23390 Stoneridge Dr. Ste E

Waukesha, WI 53188 USA

www.blizzardlighting.com

414-395-8365

Disclaimer: The information and specications contained in this document are subject

to change without notice. Blizzard Lighting™ assumes no responsibility or liability

for any errors or omissions that may appear in this user manual. Blizzard Lighting™

reserves the right to update the existing document or to create a new document to

correct any errors or omissions at any time. You can download the latest version of this

document from www.blizzardlighting.com.

Author: Date: Last Edited: Date:

J. Thomas 8/20/2015 J. Thomas 8/27/2015

Page 4

SAFETY INSTRUCTIONS

• Please keep this User Guide for future use. If you sell the unit to someone

else, be sure that they also receive this User Guide.

• ALWAYS make sure that you are connecting to the proper voltage, and that

the line voltage you are connecting to is not higher than that stated on the

decal or rear panel of the xture.

• This product is intended for indoor use only.

• To prevent risk of re or shock, do not expose xture to rain or moisture.

• Make sure there are no ammable materials close to the unit while operating.

• The unit must be installed in a location with adequate ventilation, at least

20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are

blocked.

• ALWAYS disconnect from the power source before servicing or replacing fuse

and be sure to replace with same fuse size and type.

• ALWAYS secure xture using a safety chain. NEVER carry the xture by its

cord. Use its carrying handles.

• DO NOT operate at ambient temperatures higher than 104°F (40°C).

• In the event of a serious operating problem, stop using the unit immediately.

NEVER try to repair the unit by yourself. Repairs carried out by unskilled people

can lead to damage or malfunction. Please contact the nearest authorized

technical assistance center. Always use the same type spare parts.

• NEVER connect the device to a dimmer pack.

• Make sure the power cord is never crimped or damaged.

• Never disconnect the power cord by pulling or tugging on the cord.

• Avoid direct eye exposure to the light source while it is on.

Caution! There are no user serviceable parts inside this unit. Do not open the

housing or attempt any repairs yourself. In the unlikely event your unit may

require service, please visit http://www.blizzardlighting.com/support.

Page 5

2. MEET THE COLORISE™ INFINIWHITE LED PAR

MAIN FEATURES

• 18x 5W 3-in-1 ACW LEDs, 100,000 hours

• Built-in AnyFi™ wireless DMX receiver (2.4GHz or W-DMX™)

• Achieve white color temperatures from 2600k-7500k

• Natural convection cooled, totally silent operation

• User selectable 32-bit dimming curves

• Variable electronic dimmer strobe

• Built-in color & chase macros via DMX

• Built-in auto programs & sound active in standalone and M/S

• Color mixing ability in standalone mode

• 25 degree beam angle

• User selectable 3/4 or 7-channel DMX modes

• Flicker-free constant-current LED driver

• LED control panel with 4* touch sensitive buttons

• 3-pin male input and 3-pin female output

• PowerCon™ compatible AC power In/Out connectors

DMX Quick Reference - 7-Channel Mode

Channel 7-Channel

1 Dimmer

2 Amber Intensity

3 Warm White Intensity

4 Cool White Intensity

5 Strobe

6Custom Colors + Auto

7 32-bit Dimming

DMX Quick Reference - 4/3-Channel Modes

Channel 4-Channel 3-Channel

1 Dimmer Amber Intensity

2 Amber Intensity Warm White Intensity

3 Warm White Intensity Cool White Intensity

4 Cool White Intensity ---

Page 6

Figure 1: The Colorise™ Inniwhite Pin-Up Picture

High Power 5W 3-in-1

AWC LEDs

Heavy-Duty Cast

Aluminum Enclosure

Dual

Mounting

Yokes

Locking

Adjustment

Knobs

Figure 2: The Rear Connections

AC Power Out

DMX In DMX Out

AC Power In

4-Character LED

Control Panel

Antenna

Wireless LED

Indicator

Page 7

3. SETUP

Fuse Replacement

CAUTION! The Colorise™ Inniwhite utilizes a high-output switch-mode power

supply with an internal fuse. Under normal operating conditions, the fuse

should not require replacement. The fuse is eld replaceable, however it is an

advanced procedure suited to qualied individuals. Should your xture require

replacement, please contact Blizzard Lighting for instructions, or to return your

unit for service.

Connecting A Bunch of Colorise™ Inniwhite Fixtures

You will need a serial data link to run light shows using a DMX-512 controller

or to run shows on two or more xtures set to sync in master/slave operating

mode. The combined number of channels required by all the xtures on a serial

data link determines the number of xtures the data link can support.

Fixtures on a serial data link must be daisy chained in one single line. Also, con-

necting more than 32 xtures on one serial data link without the use of a DMX

optically-isolated splitter may result in deterioration of the digital DMX signal.

The maximum recommended cable-run distance is 500 meters (1640 ft). The

maximum recommended number of xtures on a serial data link is 32 xtures.

Data/DMX Cabling

To link xtures together you’ll need data cables. You should use data-grade

cables that can carry a high quality signal and are less prone to electromagnetic

interference.

For instance, Belden© 9841 meets the specications for EIA RS-485 applica-

tions. Standard microphone cables will “probably” be OK, but note that they

cannot transmit DMX data as reliably over long distances. In any event, the

cable should have the following characteristics:

2-conductor twisted pair plus a shield

Maximum capacitance between conductors – 30 pF/ft.

Maximum capacitance between conductor & shield – 55 pF/ft.

Maximum resistance of 20 ohms / 1000 ft.

Nominal impedance 100 – 140 ohms

Setting the DMX Input Connector as the Active DMX Input

Navigate the main menu to reach SET, press <ENTER>, then use the <UP/

DOWN> buttons until SIGN is displayed, then press <ENTER> again. Now

use the <UP/DOWN> buttons to highlight CABL (cable mode), and press

<ENTER> to conrm.

Page 8

Cable Connectors

Cables must have a male XLR connector on one end and a female XLR connec-

tor on the other end. (Duh!)

CAUTION: Do not allow contact between the common and the

xture’s chassis ground. Grounding the common can cause a ground

loop, and your xture may perform erratically. Test cables with an

ohm meter to verify correct polarity and to make sure the pins are not

grounded or shorted to the shield or each other.

3-Pin??? 5-Pin??? Huh?!?

If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter.

They are widely available over the internet and from specialty retailers If you’d like to build your own, the

chart below details a proper cable conversion:

Conductor 3-Pin Female

(Output)

5-Pin Male

(Input)

Ground/Shield Pin 1 Pin 1

DMX Data (-) Pin 2 Pin 2

DMX Data (+) Pin 3 Pin 3

Not Used. No Connection. No Connection.

Take It To The Next Level: Setting Up DMX Control

Step 1: Connect the male connector of the

DMX cable to the female connector (output) on

the controller.

Step 2: Connect the female connector of the

DMX cable to the rst xture’s male connector

(input). Note: It doesn’t matter which

xture address is the rst one connected. We

recommend connecting the xtures in terms

of their proximity to the controller, rather than

connecting the lowest xture number rst, and

so on.

Step 3: Connect other xtures in the chain

from output to input as above. Place a DMX

terminator on the output of the nal xture to

ensure best communication.

Page 9

Fixture Linking (Master/Slave Mode)

1. Connect the (male) 3 pin connector side of the

DMX cable to the output (female) 3 pin connector of

the rst xture.

2. Connect the end of the cable coming from

the rst xture which will have a (female) 3 pin

connector to the input connector of the next xture

consisting of a (male) 3 pin connector. Then,

proceed to connect from the output as stated above

to the input of the following xture and so on.

A quick note: Often,

the setup for Master-

Slave and Standalone

operation requires that

the rst xture in the

chain be initialized for

this purpose via either

settings in the control

panel or DIP-switches.

Secondarily, the xtures

that follow may also

require a slave setting.

Check the “Operating Adjustments” section in this manual for com-

plete instructions for this type of setup and conguration.

Mounting & Rigging

This xture may be mounted in any SAFE position provided there is

enough room for ventilation.

It is important never to obstruct the fan or vents pathway. Mount the

xture using a suitable “C” or “O” type clamp. The clamp should be

rated to hold at least 10x the xture’s weight to ensure structural sta-

bility. Do not mount to surfaces with unknown strength, and ensure

properly “rated” rigging is used when mounting xtures overhead.

Adjust the angle of the xture by loosening both knobs and tilting the

xture. After nding the desired position, retighten both knobs.

• When selecting installation location, take into consideration lamp

replacement access (if applicable) and routine maintenance.

• Safety cables MUST ALWAYS be used.

• Never mount in places where the xture will be exposed to rain,

high humidity, extreme temperature changes or restricted ventilation.

Page 10

Using the AnyFi™ Wireless DMX Receiver

In addition to the unbridled thrill you already received the rst time you turned on your

xture, you’ll be delighted to know that your Colorise™ Inniwhite is equipped to work

seamlessly with our own Skywire™ 2.4GHz wireless DMX products,

as well as W-DMX™ wireless products. W-DMX™ is a two-time

award winning wireless DMX technology, created and owned by

Wireless Solution Sweden AB.

Skywire™ wireless DMX products feature 512 auto-assigning

frequencies in 7 groups allowing up to 7 systems to run

simultaneously in the same space, completely free of interference,

with reliable wireless communication for over 1000 feet line-of-

sight! Using W-DMX™ wireless, you can expect an outstanding wireless range of up to 500

meters (line-of-sight), very easy setup, and leave any worries behind concerning loss of signal

due to its built-in FHSS technology (Frequency Hopping Spread Spectrum).

So rst, if you would like to use Standard 2.4GHz wireless DMX, you will need a Blizzard

wiCICLE® transmitter, Lightcaster™ transceiver, or any Blizzard Lighting controller that has

this type of built-in wireless transmitter, like our Kontrol 6 Skywire™ to act as a transmitter.

And if you plan on using W-DMX™ 2.4GHz wireless for your setup, you will need a W-DMX™

transceiver to broadcast the signal from your controller, such as our Lightcaster W-DMX™.

Ready to move on? Well alrighty!

1.) IMPORTANT - Set the Fixture to Receive Wireless Signal in the Control Panel

a.) Navigate the main menu to reach SET, press <ENTER>, then use the <UP/

DOWN> buttons until SIGN is displayed, then press <ENTER> again. Now use the

<UP/DOWN> buttons to highlight 2.4G (wireless mode), and press <ENTER> to

conrm.

2.) Resetting The Wireless

a.) Navigate the main menu to reach SET, press <ENTER>, then use the <UP/

DOWN> buttons until WIRE is displayed, then press <ENTER> again.

b.) From here, you can use the <UP/DOWN> buttons to highlight REST and press

<ENTER>, select YES, then <ENTER> to reset the wireless setup.

3.) Select W-DMX™ or Standard 2.4GHz Receiver

a.) Make sure the device you are using to transmit signal with is powered on.

b.) Navigate the main menu to reach SET, press <ENTER>, then use the <UP/

DOWN> buttons until WIRE is displayed, then press <ENTER> again.

c.) Now use the <UP/DOWN> buttons to highlight KEY in the menu, and press

<ENTER>.

d.) At this point, please note that every time you touch the <ENTER> button, the

wireless LED status indicator changes between 4 colors (but only 2 are functional):

• GREEN: W-DMX™ 2.4 GHz Mode

• YELLOW: Standard 2.4 GHz Mode (wiCICLE™ & LightCaster Compatible)

*Note: RED and BLUE currently have no function during this selection process.

e.) While the LED indicator is illuminated in GREEN (for W-DMX) or YELLOW (for

Standard 2.4GHz), press and hold the <ENTER> button for 3 seconds to make your

chosen wireless type the active wireless DMX signal type.

For W-DMX™ connections, you should be done. The xture will detect the signal!

*For Standard 2.4GHz connections, please continue to Step 5 on the next page.

Universal Wireless DMX

Tabla de contenidos

Otros manuales de Equipo de iluminación de Blizzard Lighting

Blizzard Lighting

Blizzard Lighting the puck Manual de usuario

Blizzard Lighting

Blizzard Lighting ToughPAR Satellight Manual de usuario

Blizzard Lighting

Blizzard Lighting THE PUCK RGBA LED PAR Can Manual de usuario

Blizzard Lighting

Blizzard Lighting SPOTMAN Manual de usuario

Blizzard Lighting

Blizzard Lighting SNAKE EYES Manual de usuario

Blizzard Lighting

Blizzard Lighting Kontrol 5 Manual de usuario

Blizzard Lighting

Blizzard Lighting Motif Metro Manual de usuario

Blizzard Lighting

Blizzard Lighting Torrent Xray Manual de usuario

Blizzard Lighting

Blizzard Lighting SnowBlind Manual de usuario

Blizzard Lighting

Blizzard Lighting G70 Manual de usuario

Blizzard Lighting

Blizzard Lighting Torrent 90 Beam Manual de usuario

Blizzard Lighting

Blizzard Lighting ProPar V12 Manual de usuario

Blizzard Lighting

Blizzard Lighting Lo-Pro CSI Manual de usuario

Blizzard Lighting

Blizzard Lighting Flurry TRI Manual de usuario

Blizzard Lighting

Blizzard Lighting REANIMATOR Manual de usuario

Blizzard Lighting

Blizzard Lighting the puck pro zoom Manual de usuario

Blizzard Lighting

Blizzard Lighting RokBox Manual de usuario

Blizzard Lighting

Blizzard Lighting Motif Sketch Manual de usuario

Blizzard Lighting

Blizzard Lighting Node:b RGBAL Manual de usuario

Blizzard Lighting

Blizzard Lighting The Puck 3NX Manual de usuario

Blizzard Lighting

Blizzard Lighting Flurry Spot Manual de usuario

Blizzard Lighting

Blizzard Lighting G-Max 150 Manual de usuario

Blizzard Lighting

Blizzard Lighting KAYO.MORPH Manual de usuario

Blizzard Lighting

Blizzard Lighting HUSH PAR Infiniwhite 500 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario