Blendtec Xpress Blender Manual de usuario

Page 1

Table Of Contents

Section Page

Section 1.....Important Safeguards 2

Section 2.....Component Overview 4

Section 3.....Unpacking 6

Section 4.....Installation 7

Section 5.....Operating Instructions 8

Section 6.....Warranty and Service 13

Page 2

SECTION 1 – IMPORTANT SAFEGUARDS

Read all instructions carefully before using your Blendtec machine.

1.1 SAFETY CERTIFICATION

The Xpress and accessories are certied by ETL to

UL standard 763 and by CE Standards.

1.2 HEALTH CERTIFICATION

The Xpress and accessories are certied by NSF

International.

1.3 AVOID CONTACT WITH MOVING PARTS

● Keep ngers, hands, hair and clothing away from all moving parts.

● Keep all utensils away from the drive socket and blender blades during

operation. Metal utensils will damage blades.

● NEVER put hands into blender jar or add substances by hand when

blender is operating.

● NEVER place jar into drive socket if blender motor is operating.

● Do not rock the blender when it is operating. Keep the blender jar

straight up until the operation is complete.

● These precautions will prevent personal injury and/or damage to the

blender.

1.4 POWER CORD PRECAUTIONS

● Do not operate with a damaged cord or plug.

● If the supply cord is damaged, it must be replaced by the manufacturer

or its service agent in order to avoid a hazard.

● Do not let the cord hang over the edge of the work surface.

● Never use an extension cord with the unit.

● Unplug the blender motor before changing blender locations or

cleaning.

1.5 NEVER ATTEMPT TO REPAIR THE POWER UNIT

Never remove the blender base cover. The blender base does not

contain self-adjustable or serviceable parts. All service and adjustments

must be made by a qualied service agent. Removing the cover or

attempting to service the blender will void the warranty.

1.6 TURN THE UNIT OFF WHEN NOT IN USE

Page 3

1.7 THE 220/240 VOLT RECEPTACLE FOR EACH POWER UNIT MUST BE

PROTECTED BY A SEPARATE 7.5 AMP OR GREATER CIRCUIT BREAKER

OR FUSE.

Do not use any other electrical equipment on the same circuit as

the blender or you risk overloading the circuit and either damaging

the blender electronics or blowing the circuit protection.

1.8 NEVER OPERATE IF THE UNIT APPEARS DAMAGED

If the blender malfunctions call the service agent rst. If it is dropped

or damaged in any way, return the blender to a Blendtec service agent

immediately for examination, repair, electrical or mechanical adjustment,

or possible replacement.

1.9 NEVER OPERATE IN LIQUID

Do not operate the blender motor in water or any other liquid. Avoid

any contact between the motor and water. Deliberate use of machine

outdoors in conditions where precipitation is present will void the

warranty.

1.10 NEVER PUT ITEMS SUCH AS METAL, ROCKS, OR OTHER

HARD MATERIALS INTO BLENDER JAR

Metal utensils and other hard materials are dangerous. They can cause

injury or damage. Damage caused by such foreign objects will void the

warranty.

1.11 NEVER OPERATE USING ATTACHMENTS NOT SOLD BY

BLENDTEC

The use of unauthorized attachments voids the warranty and may cause

re, electric shock, or injury.

1.12 ALWAYS SECURE THE BLENDER LID BEFORE STARTING THE

MACHINE

Make sure you place a lid on the blender jar before you close the cover.

1.13 AVOID TOUCHING THE BASE AFTER EXTENSIVE USE

The base of the blender may become hot after numerous cycles.

1.14 BLADES ARE SHARP! HANDLE CAREFULLY

1.15 When blending HOT LIQUIDS, remove center plug of lid.

SAVE THESE INSTRUCTIONS

Page 4

SECTION 2: COMPONENT OVERVIEW

2.1 BLENDER MOTOR

The blender motor consists of the motor, touch pad control, and Liquid

Crystal Display (LCD) information center. (See Figures 1 and 2.)

● Motor housing: Houses the power unit in a plastic casing. Never

remove the motor cover. Removal of the motor cover will void the

warranty.

● Blender Motor: This unit is located within the motor housing and

contains the machinery which runs the blender, including the electric

motor, drive train, and computerized control board.

● Touch Pad: Consists of six buttons which contain pre-programmed

settings as well as a pulse for selective blender control.

● LCD Information Center: When a cycle is completed, the display

increments the cumulative cycle for warranty purposes. It also indicates

overload or over-temperature conditions.

2.2 BLENDER JAR ASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly,

and lid. The blender jar assembly integrates these components to

ensure consistently blended drinks and greater operator safety.

● Jar: Made from polycarbonate to provide maximum performance as

well as clear visibility of blender performance.

● Blade Assembly: Stainless steel, designed to ensure fast, consistent

blending.

● Lid: Designed to provide ease of handling and quick removal for high

speed operations.

2.5 POWER SPECIFICATIONS

The Xpress is certied for use on 220/240 volt circuits and is limited

to 6.5 amps. It is required that this unit be installed with a 7.5 amp or

greater circuit breaker or fuse.

Page 5

Page 6

SECTION 3: UNPACKING

Save the two foam inserts and all packaging for future storage or

shipping. Save these instructions for future reference.

3.1 UNPACKING YOUR BLENDER

1. You should have received the following items:

● Model ES3 Blender Base

● One or more blender jar with lids

2. Remove blender motor,blender jars and lids from carton.

3. Unwind the power cord.

4. Check for and remove any packing material which may have blocked

ventilation holes in either the power unit or the black motor stand.

5. Inspect all items to ensure no damage occurred in shipment.

6. If any damage has occurred contact your Blendtec service agent

immediately.

3.2 RECORDING YOUR SERIAL NUMBER AND DATE OF SHIPMENT

Record your blender serial number and date of purchase in the space

below. You will need these when contacting Blendtec for service.

Blender Serial # __________________________

Date of Purchase __________________________

Refer to these whenever contacting your Blendtec service agent.

Page 7

SECTION 4: INSTALLATION

4.1 Xpress Installation

1. Place blender on a at, clean, dry surface.

2. Make sure plug outlet is available within four feet of the motor base.

3. Plug the unit into a 220/240 volt receptacle with 7.5 amp protection.

Make sure switch is turned off before plugging in. Failure to use a

dedicated line may result in damage to the blender. Lack of adequate

power causes the motor to overheat (which shortens the life of the

blender electronics.) Operating the blender in this manner will void the

warranty.

4. Ensure that the blender vents are unobstructed to allow for proper

cooling during use.

Page 8

SECTION 5: OPERATING INSTRUCTIONS

5.1 OPERATIONAL OVERVIEW

1. Turn on the main power switch located on the back of the blender.

2. Place the properly lled blender jar on the motor, making sure the jar is

seated all the way down and jar lid is secured tightly on the jar.

3. Press the button on the touchpad of your desired blender cycle.

5.2 AUTOMATIC CYCLE OPERATION

Buttons 1-5 are programmed cycles designed for various drink

combinations.

Button 1: Runs at low speed for 30 seconds and automatically shuts off.

Button 2: Runs at high speed for 30 seconds and automatically shuts

off.

Button 3: Features changing blade speeds for 14 seconds and

automatically shuts off.

Button 4: High energy cycle running 23 seconds. Used for easy to blend

smoothies.

Button 5: High energy cycle running 35 seconds. Used for easy to blend

fruit smoothies

5.3 MANUAL OPERATION

Pulse Button: Blends mixture at a constant HIGH speed (70 percent

power) while button is depressed. Generally this is the last button on the

far right of the blender touchpad and is indicated by the letter “P”. This

button is normally used for additional blending once a programmed cycle

has already been used.

5.4 TROUBLESHOOTING SUGGESTIONS

BLENDER MOTOR WILL NOT TURN ON: If the blender motor will not

turn on, try the following:

● Make sure the main power switch on the rear panel is turned on.

● Check the house current breaker switch or fuse to make sure it is set to

Tabla de contenidos

Otros manuales de Licuadora de Blendtec

Blendtec

Blendtec Home Blender Guía

Blendtec

Blendtec STEALTH 895 Guía

Blendtec

Blendtec Q-SERIES Manual de usuario

Blendtec

Blendtec Designer Series WildSide Manual de usuario

Blendtec

Blendtec Professional Series Manual de usuario

Blendtec

Blendtec Classic Manual de usuario

Blendtec

Blendtec Classic Manual de usuario

Blendtec

Blendtec Xpress Manual de usuario

Blendtec

Blendtec CHEF Manual de usuario

Blendtec

Blendtec Go 41-503 Manual de usuario

Blendtec

Blendtec DESIGNER SERIES Guía

Blendtec

Blendtec CLASSIC SERIES Guía

Blendtec

Blendtec PROFESSIONAL 800 Guía

Blendtec

Blendtec Total Blender Guía

Blendtec

Blendtec Rapid Rinser Manual de usuario

Blendtec

Blendtec CLASSIC SERIES Wildside+ Guía

Blendtec

Blendtec DESIGNER 625 Manual de usuario

Blendtec

Blendtec CLASSIC SERIES Guía

Blendtec

Blendtec Signature Series Manual de usuario

Blendtec

Blendtec A3-31E-BHMV Manual de usuario

Blendtec

Blendtec ES3 Manual de usuario

Blendtec

Blendtec Wildside Plus Designer Series Guía

Blendtec

Blendtec Total Blender Guía

Blendtec

Blendtec CLASSIC SERIES Guía

Manuales populares de Licuadora de otras marcas

ROTOR

ROTOR 1125.201 Manual de usuario

Braun

Braun Multiquick 5 Vario series Manual de usuario

ARENDO

ARENDO MIRA 305424 Manual de usuario

CHEF-BUILT

CHEF-BUILT CCB-3500 Manual de usuario

Viconte

Viconte VC-4406 Manual de usuario

Oster

Oster BLSTAB-CB0 Manual de usuario

HOFFEN

HOFFEN MC-3005 Manual de usuario

Black & Decker

Black & Decker BLC18750DM Manual de usuario

Sunbeam

Sunbeam 4182 Manual de usuario

Bialetti

Bialetti FMX35 Manual de usuario

Black & Decker

Black & Decker BL8000 Manual de usuario

Duronic

Duronic BL530 Manual de usuario

Exquisit

Exquisit MS 3002 wes Manual de usuario

Lumme

Lumme LU-KP1891A Manual de usuario

Binatone

Binatone HB-735 Manual de usuario

Moulinex

Moulinex LM936E10 Manual de usuario

Oster

Oster VERSA Manual de instalación y operación

Ninja

Ninja NN210Q Manual de usuario