Blendtec Total Blender Guía

www.blendtec.com

Owner’s Manual and User Guide

® Total Blender

TABLE OF CONTENTS

SECTION   PAGE#

SECTION1: IMPORTANT SAFEGUARDS 4

SECTION2:UNPACKING 6

SECTION3: TOTAL BLENDER OVERVIEW 7

SECTION4: INSTALLATION 7

SECTION5: CARE AND CLEANING 9

SECTION6: OPERATIONAL OVERVIEW 10

SECTION7: TROUBLESHOOTING 11

SECTION8: WARRANTY 13

SECTION1

IMPORTANTINFORMATION

Read all instructions carefully before using your TOTAL BLENDER™

1.1SAFETYCERTIFICATION

The blender is certied by ETL (Report No. 3018204-4, 3018204-2 &

3018204-3). To comply with UL standard 982 4th ed. 11-29-2001, and

to CSA standard C22.2 No. 195-m 1987, Nov. 1990, R 1994

1.2TOTALBLENDERCERTIFICATION

TOTAL BLENDER and its accessories are certied by NSF Internation-

al (NSF), under the letter K (for K-TEC) in the NSF Ofcial Listing.

1.3AVOIDCONTACTWITHMOVINGPARTS

• Keep ngers, hands, hair and clothing away from all moving parts.

• Keep all utensils away from the drive socket and blender blades during

operation. Metal utensils will damage blades.

• NEVER put hands into blender jar or add substances by hand when the blender

is operating.

• NEVER place jar into drive socket if blender motor is operating.

• DO NOT rock the blender during operation.

These precautions will prevent personal injury and/or damage to the blender.

1.4NEVEROPERATETHEBLENDERIFITAPPEARSDAMAGED

If the blender malfunctions call your service agent rst. If it is dropped or damaged in

any way, return the blender to a Blendtec service agent immediately for examination,

repair, electrical or mechanical adjustment, or possible replacement.

1.5NEVEROPERATEBLENDERINLIQUID

To protect against the risk of electrical shock do not put the motor base in water or

other liquid. Do not use the blender outdoors where it is subject to precipitation.

1.6NEVERPUTNON-FOODITEMSINTOJAR

Metal utensils, rocks and glass are dangerous if placed in jar. Damage caused by

such foreign objects will void the warranty. Keep hands and utensils out of jar while

blending to reduce the risk of severe injury to persons or damage to the blender.

Utensils may only be used when the blender is not running.

1.7NEVEROPERATETHEBLENDERWITHOUTTHELIDINPLACE

www.blendtec.com

1.8NEVEROPERATETHEBLENDERUSINGATTACHMENTSNOTSOLDBY

BLENDTEC

The use of any unauthorized attachments may cause re, electric shock, and/or injury

and will void the warranty.

1.9CONTAINERMUSTBEPROPERLYINPLACEWHILEAPPLIANCEIS

OPERATING

1.10BLADESARESHARP!HANDLECAREFULLY!

1.11WHENBLENDINGHOTLIQUIDS,REMOVECENTERPIECEOFLID

1.12POWERCORDPRECAUTIONS

• NEVER operate with a damaged cord or plug. (If the supply cord is damaged it

must be replaced by the manufacturer, or authorized service agent to avoid a

hazard

• DO NOT permit the cord to hang over the edge of the work surface.

• NEVER use an extension cord with the unit.

• Unplug the blender motor when not in use; before changing blender locations; or

cleaning.

1.13NEVERATTEMPTTOREPAIRTHEPOWERUNIT

Never remove the blender motor cover. The blender motor does not contain self-

adjustable or serviceable parts. A qualied service agent must make all service

adjustments. Removing the cover or attempting to service the blender will void the

warranty.

1.14TURNTHEPOWERSWITCHOFFWHENNOTINUSE

The Power Switch (ON/OFF switch) is located on the back of the blender motor cover.

1.15AVOIDTOUCHINGTHEBLENDERDRIVESOCKETAFTER EXTENSIVE

USE.

The blender drive socket may become hot after numerous cycles.

1.16CLOSESUPERVISIONISNECESSARYWHENAPPLIANCEISUSEDBY

ORNEARCHILDREN.

1.17THETOTALBLENDERISINTENDEDFORHOMEUSEONLY!ANYUSE

OFTHETOTALBLENDERTMFORCOMMERCIALPURPOSESVOIDSALL

WARRANTIES.

SAVETHESEINSTRUCTIONS

SECTION2

SAVEALLPACKAGINGMATERIALSANDINSTRUCTIONSFORFUTUREUSE.

2.1UNPACKINGYOURBLENDER

You should have received the following items:

• TOTAL BLENDER™ motor base

• Blender jar with lid

• Recipe book

1. Remove blender motor, blender jar and lid from packaging.

2. Unwind the power cord.

3. Check for any packing material that may have blocked ventilation holes in

the blender motor.

4. Inspect all items to ensure no damage occurred in shipment.

5. If any damage has occurred contact your Blendtec service agent

immediately.

2.2RECORDINGYOURSERIALNUMBERANDDATEOFPURCHASE

Record your blender motor serial number and date of purchase in the space below.

You will need these when contacting Blendtec for service or questions.

Motor Serial #:

____________________________________________________

(Found on bottom of motor base)

Date of Purchase:

____________________________________________________

Purchased From

____________________________________________________

2.3REGISTRATIONOFYOURBLENDER

under the ‘Service’ button) or return the registration card to the address provided.

www.blendtec.com

SECTION3

TOTALBLENDEROVERVIEW

(Refer to Figures 1 and 2)

3.1BLENDERMOTOR

• Motor Cover: Houses the power unit in a durable, easy-to-clean

polycarbonate.

• Touch Pad: Consists of nine buttons that contain pre-programmed settings for

selective blender control which includes a pulse button, and two speed control

buttons.

• LCD Information Center: Will indicate status of unit as well as overload or over-

temperature conditions.

• Power Unit: This unit is located within the blender motor and contains the machin-

ery that runs the blender.

• Power Switch: Located on the back lower-right corner of the power unit.

3.2BLENDERJARASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly, and lid.

• Jar: Made from a tough durable material to provide maximum efciency and clear

visibility of blender performance.

• Blade Assembly: Stainless steel designed to provide fast consistent blending.

SECTION4

INSTALLATION

We recommend that surge protection be placed between the receptacle and the

blender motor.

TOTALBLENDERINSTALLATION

1. Place blender on a at, clean and dry surface.

2. Make sure a plug outlet is available within four feet of the blender motor.

3. Ensure that the unit is turned off before plugging it into a separate 120-volt recep-

tacle.

4. Ensure that blender vents are unobstructed to allow proper cooling during use.



Figure2FrontView

Figure1SideView

Lid

Jar

Blade Assembly

Motor Base Cover

Power Switch

Power Cord

Blender Drive

Socket

Touch Pad

LCD Information

Center

www.blendtec.com

SECTION5

CAREANDCLEANING

5.1AFTERUSECLEANING

1. Add 1 cup of hot water and a drop of liquid dishwashing soap to the blender jar.

2. Place the lid tightly onto the jar. Place the blender jar on the blender base, and

with your hand placed on top of the lid; press the pulse button for 5 seconds.

3. Rinse with clear water until all soap is rinsed from jar and lid.

4. Clean the blender base by simply wiping the base and touchpad with a damp rag

and water.

5.2LONG-TERMSANITATION

1. For long-term sanitation, occasionally ll the blender jar half way with hot water.

2. Add one teaspoon of liquid chlorine bleach.

3. Stir for 10 seconds to mix water and bleach. Let mixture stand in blender jar for

ve minutes.

4. Empty water/bleach mixture and rinse the jar thoroughly to ensure that there is

no bleach mixture left in the jar. Turn jar RIGHT SIDE UP on dish rack until dry.

5.3CLEANINGTIPSANDCAUTIONS

• Do not use abrasives or stiff brushes to clean the blender base or jar as this will

dull or scratch the surface. Cosmetic damage is not covered by warranty.

• NEVER submerge the blender motor in water. Avoid submerging blender jars for

more than 5 minutes. Water penetration through the lower jar seals will reduce

the life of the jar. After cleaning, we recommend the blender jar be stored up-

right.

• BLENDER JAR IS DISHWASHER SAFE - TOP RACK ONLY! Extreme temperatures

damage the lower seal to the jar.

SECTION6

OPERATIONALOVERVIEW

6.1MAINPOINTSOFOPERATION

1. Turn on the main power switch located on the back of the blender motor in the

lower right corner.

2. Place the blender jar on the base, making sure the jar is secure. Attach the

blender lid. Hold the jar lid down with your hand if the jar is more than half full.

3. Press the desired touch pad button once. You may press any button on the lower

row to stop the cycle.

4. When cycle is complete, remove the blender jar and serve.

6.2AUTOMATICCYCLEOPERATION

The Blendtec Total Blender has blending cycles for ice cream, frozen yogurt, ice

crushing, milkshakes, soups, syrups, fondues, sauces, dips, dressings, batters, whole

juice, and smoothies. These cycles have variable speed settings that will change

during the course of the cycle. This allows the blender to draw the contents into the

blending vortex, which creates the desired texture. The blender will run its pre-pro-

grammed cycle and automatically shut off. If at any point you want to stop the blender

before it has completed its cycle press any lower row button.

Note: The speed buttons allow you to control the blender to operate up to 10 speed

settings. Simply press the speed up button and the motor will begin. Continue press-

ing the Speed Up key to increase the speed, or press the Speed Down key at any time

to decrease speed. Once you have reached the desired speed release the button.

Once you press a speed button, the blender will begin to run at the selected speed,

then shut off after 50 seconds. To stop the cycle before the 50 seconds, press any

button on the lower row.

Otros manuales para Total Blender

Tabla de contenidos

Otros manuales de Licuadora de Blendtec

Blendtec

Blendtec Total Blender Classic Combo Manual de usuario

Blendtec

Blendtec Professional Series Manual de usuario

Blendtec

Blendtec A3-31E-BHMV Manual de usuario

Blendtec

Blendtec Home Blender Guía

Blendtec

Blendtec Rapid Rinser Manual de usuario

Blendtec

Blendtec Tom Dickson Extreme Blender Manual de usuario

Blendtec

Blendtec Q-SERIES Manual de usuario

Blendtec

Blendtec Wildside Plus Designer Series Guía

Blendtec

Blendtec PROFESSIONAL 800 Guía

Blendtec

Blendtec DESIGNER 625 Manual de usuario

Blendtec

Blendtec Designer Series WildSide Manual de usuario

Blendtec

Blendtec CLASSIC SERIES Guía

Blendtec

Blendtec DESIGNER SERIES Guía

Blendtec

Blendtec Stealth Manual de usuario

Blendtec

Blendtec Signature Series Manual de usuario

Blendtec

Blendtec ES3 Manual de usuario

Blendtec

Blendtec CLASSIC SERIES Guía

Blendtec

Blendtec Xpress Manual de usuario

Blendtec

Blendtec Xpress Blender Manual de usuario

Blendtec

Blendtec Classic Manual de usuario

Blendtec

Blendtec BD8 Manual de usuario

Blendtec

Blendtec Q-SERIES Manual de usuario

Blendtec

Blendtec Go 41-503 Manual de usuario

Blendtec

Blendtec HomeBlender Guía

Manuales populares de Licuadora de otras marcas

ROTOR

ROTOR 1125.201 Manual de usuario

Braun

Braun Multiquick 5 Vario series Manual de usuario

ARENDO

ARENDO MIRA 305424 Manual de usuario

CHEF-BUILT

CHEF-BUILT CCB-3500 Manual de usuario

Viconte

Viconte VC-4406 Manual de usuario

Oster

Oster BLSTAB-CB0 Manual de usuario

HOFFEN

HOFFEN MC-3005 Manual de usuario

Black & Decker

Black & Decker BLC18750DM Manual de usuario

Sunbeam

Sunbeam 4182 Manual de usuario

Bialetti

Bialetti FMX35 Manual de usuario

Black & Decker

Black & Decker BL8000 Manual de usuario

Duronic

Duronic BL530 Manual de usuario

Exquisit

Exquisit MS 3002 wes Manual de usuario

Lumme

Lumme LU-KP1891A Manual de usuario

Binatone

Binatone HB-735 Manual de usuario

Moulinex

Moulinex LM936E10 Manual de usuario

Oster

Oster VERSA Manual de instalación y operación

Ninja

Ninja NN210Q Manual de usuario