Black Box LES1208A-R2 Manual de usuario

BL A C K B O X®

Securely manage data center and network

equipment from anywhere in the world.

8-/16-/32-/48-Port Advanced Console Servers QS Guide

Customer

Support

Information

LES1208A-R2

LES1216A-R2

LES1232A

LES1248A-R2

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax

724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,

PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]

Page 1

724-746-5500 | blackbox.com

8-, 16-, 32-, 48-Port Advanced Console Servers Quick Start Guide

TRADEMARKS USED IN THIS MANUAL

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc.

Nagios is a registered trademark of Nagios Enterprises, LLC.

Any other trademarks mentioned in this manual are acknowledged to be

the property of the trademark owners.

Page 2 724-746-5500 | blackbox.com

8-, 16-, 32-, 48-Port Advanced Console Servers Quick Start Guide

QS1. Introduction

This Quick Start Guide walks you through installation, configuration, and local

operation or your LES1208A-R2, LES1216A-R2, LES1232A, and LES1248A-R2

8-/16-/32-/48-Port Advanced Console Servers. For more details, please refer to the

user’s manual on the CD-ROM.

QS2. What’s Included

Your package should contain the following items. if anything is missing or damaged,

contact Black Box at 724-746-5500.

• Console Server

• (2) UTP cables

• (1) DB9F-RJ45S straight cable

• (1) DB9F-RJ45S crossover cable

• (1) Power cable

• Printed Quick Start Guide

• User’s manual and SDT connector tool software on CD-ROM

QS3. Connect the Hardware

1. Plug the Advanced Console Server into the AC power. The Advanced Console

Server has dual universal AC power supplies with automatic failover built in.

2. Connect the NETWORK1 port on the console server to your network. Connect

your serial devices to the SERIAL PORTS 1-8/16/48.

NOTE: If you plan to use out-of-band (OoB) dial-in access, connect the internal

modem to the phone line. If you plan to use broadband OoB, connect the

access device (such as DSL modem) to NETWORK2.

QS4. Set Up the Advanced Console Server

The default console server IP Address is 192.168.0.1 (subnet mask 255.255.255.0).

Using a Web browser on any computer that is LAN connected to the Console Server:

1. Enter https://192.168.0.1 into the address bar.

2. Log in using the default system user name root and the default password. A

Welcome screen listing the basic configuration steps is displayed.

3. Select “System: Administration,” enter and confirm a new System Password and

click “Apply.”

Page 3

724-746-5500 | blackbox.com

8-, 16-, 32-, 48-Port Advanced Console Servers Quick Start Guide

NOTE: The computer connected to the LAN must have an IP address in the same

network range (192.168.0.xxx) as the Advanced Console Server. Alternately,

you can use the ARP ping command to set the IP address (refer to the user’s

manual). The embedded DHCP client is enabled by default, so it will

automatically accept any network IP address assigned by any DHCP server on

your network—and will then respond at both 192.168.0.1 and its DHCP

address.

Figure QS-1. System Administration screen.

4. To assign your Console Server a static IP address or to permanently enable DHCP,

select “System: IP” and check “DHCP or Static for Configuration Method.”

The Advanced Console Server also has a second Ethernet network port (Network 2)

that you can configure as a management gateway/LAN port (with firewall/router

isolation and DHCP server) or as a failover/OoB access port. By default, this port is

inactive.

To activate broadband failover/OoB, refer to the user’s manual, otherwise leave

Failover Interface at its default selection, None.

To use Network 2 as the management LAN gateway:

1. Select “System: IP” then “Network 2” and uncheck “Disable.”

2. Enter the IP Address and Subnet Mask for this segment of the Management LAN

(leaving Gateway and DNS fields blank). Refer to the user’s manual if you want to

enable the DHCP server.

NOTE: By default, only HTTPS and SSH access is enabled to the Advanced Console

Server itself. Use the Service Access menu on “System: Firewall” to change

this, and to change access privileges for connected serial and network devices.

Similarly, use the “Forwarding & Networking” menu to permit remote IP

access to devices on Network of Management LAN.

Page 4 724-746-5500 | blackbox.com

8-, 16-, 32-, 48-Port Advanced Console Servers Quick Start Guide

Figure QS-2. Management LAN interface screen.

QS5. Configure Serial and Network Devices

1. Select “Serial & Network: Serial Port” to display the labels, modes, and protocol

options currently set for each serial port—by default all serial ports are set in

Console Server mode (refer the user’s manual if other modes are required).

2. To configure a serial port, click “Edit.” Configure the Common Settings (Baud

Rate, Parity, Data Bits, Stop Bits, and Flow Control) to match those of the device

being controlled.

Figure QS-3. Serial and Network: Serial Port.

3. Select the console server protocols (Telnet, SSH, TCP, and RFC2217) that are to be

used for the data connection to that port.

4. You may also set a Logging Level to specify the level of information to be logged

and monitored for that port. Click “Apply.”

5. To access locally networked computers (referred to as Hosts) through the console

servers, select “Serial & Network: Network Hosts” and click “Add Host.”

Page 5

724-746-5500 | blackbox.com

8-, 16-, 32-, 48-Port Advanced Console Servers Quick Start Guide

Figure QS-4. Serial and Network: Network Hosts screen.

6. Enter the IP address/DNS Name of the host.

7. Edit the Permitted Services used for accessing this host, for example, HTTPS (TCP

Port 443), VNC (TCP Port 5990), or add custom TCP or UDP port numbers. Only

the services specified here are tunneled to the host, all other services are blocked.

8. At this stage, you may also specify the level of information to be logged and

monitored for each host access.

9. Click “Apply.”

10. The Advanced Console Server has one USB 1.1 port (on the front panel) and two

USB 2.0 ports on the back panel. Attached USB devices are auto-configured.

• The console server has an internal 16 GB flash drive for log file storage. However,

the USB 1.1 port can be used with an external USB flash for loading updated

firmware or config files.

• The USB 2.0 ports can also be used for connecting to USB console ports on UPS

supplies or attaching cellular USB modems.

QS6. Add New Users

NOTE: We recommend that you set up a new Administrator user (in the admin

group with full access privileges) and log in as this new user for all ongoing

administration functions (instead of continuing as root).

Page 6 724-746-5500 | blackbox.com

8-, 16-, 32-, 48-Port Advanced Console Servers Quick Start Guide

Figure QS-5. Serial and Network: Users and Groups screen.

1. For each new user, select “Serial & Network: Users & Groups” and click “Add

User.”

2. Enter a Username and enter and confirm a Password, and name the Accessible

Hosts and Accessible Ports the user is allowed to access.

3. Click “Apply.”

NOTE: The Console Server comes with a default certificate for initial configuration

only. When you first browse to the Console Server, you will receive a message

that the certificate is “untrusted.” Initially, you'll need to direct your browser

to (temporarily) proceed and accept this untrusted certificate.

We recommend that you generate and install a new trusted certificate as soon

as possible thereafter. To produce the unique CSR and later upload the newly

issued certificate, select “System: SSL Certificates.”

QS7. Advanced Configurations

The Advanced Console Server offers many more advanced functions including:

• The Alerts & Logging: Alerts facility that monitors serial ports, hosts, user logins,

UPSs and PDUs. You can specify a broad selection of trigger events (such as data

patterns, temperature, or battery levels). When triggered, a warning e-mail, SMS,

Nagios®, or SNMP alert is sent to a nominated destination.

Page 7

724-746-5500 | blackbox.com

8-, 16-, 32-, 48-Port Advanced Console Servers Quick Start Guide

• Extensive management of third-party UPSs and PDUs using open source NUT and

Powerman tools. The Manage: Power facility enables both administrators and

regular users to monitor and control attached PDU power strips, and servers with

embedded IPMI BMCs.

• Historical logs of all communications with serial and network attached devices,

system activity, UPS and PDU power status, environmental status, etc. The level of

logging is set as ports and devices are configured. Alerts & Logging: Port Log

enables this history to be saved locally or remotely. Logs can be viewed from the

Status and Manage menus.

• Other advanced features, such as Dashboard, Serial Port Cascading, remote

Authentication, Trusted Networks, Secure Tunneling, Nagios Distributed

Monitoring, and the Command Line interface are covered in detail in the User’s

Manual on the CD-ROM.

NOTE: On the CD-ROM, you will also find the SDT Connector software tool. Once

you have configured the console server, this tool provides you with secure,

point-and-click access to it and all its attached managed devices. Refer to the

provided SDT Connector Quick Start Guide for details on setting up remote

management of the console server and connected devices.

BL A C K B OX®

Black Box Tech Support: FREE! Live. 24/7.

Tech support the

way it should be.

Great tech support is just 30 seconds away at

724-746-5500 or blackbox.com.

724-746-5500 | blackbox.com

About Black Box

Black Box Network Services is your source for an extensive range of networking

and infrastructure products. You’ll find everything from cabinets and racks and

power and surge protection products to media converters and Ethernet switches

all supported by free, live 24/7 Tech support available in 30 seconds or less.

LES1208A-R2 Quick Start Guide, version 2

Otros manuales para LES1208A-R2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de Black Box

Black Box

Black Box ServTray KVT201A-JP-R3 Manual de usuario

Black Box

Black Box LE995A-R4 Manual de usuario

Black Box

Black Box LES1516A Manual de usuario

Black Box

Black Box LS50116-R3 Manual de usuario

Black Box

Black Box ServView II Manual de usuario

Black Box

Black Box Industrial Ethernet Serial Server LES401A... Manual de usuario

Black Box

Black Box LES1108A Manual de usuario

Black Box

Black Box LWS405A Manual de usuario

Black Box

Black Box LS1016A Manual de usuario

Black Box

Black Box LWS300A Manual de usuario

Black Box

Black Box ServShield RM470A-R2 Manual de usuario

Black Box

Black Box LES1101A-R2 Manual de usuario

Black Box

Black Box LS4103A Manual de usuario

Black Box

Black Box LES2702A-WL Manual de usuario

Black Box

Black Box LES1108A Manual de usuario

Black Box

Black Box LRA502A-ET-R5 Manual de usuario

Black Box

Black Box Terminal Server Manual de usuario

Black Box

Black Box LWS401A Manual de usuario

Black Box

Black Box CDUNM10 Manual de usuario

Black Box

Black Box LWS401A Manual de usuario

Black Box

Black Box LRA2900A Manual de usuario

Black Box

Black Box Usb Peripheral Server/5 Manual de usuario

Black Box

Black Box iCOMPEL ICC LG WEBOS 3 Manual de usuario

Black Box

Black Box LES1102A Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario