Biostar K8M800-M7A Manual de usuario

K8M800-M7A

FCC Information and Copyright

This equipment has been tested and found to comply withthe limits of a Class

B digital device,pursuant toPart15 oftheFCC Rules.These limits are designed

to provide reasonable protection against harmful interference in a residential

installation.This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions,may

cause harmful interference to radiocommunications.There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respec t to the

contents here andspecially disclaims any implied warranties ofmerchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here withoutobligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction.......................................................................1

1.1 Motherboard Features..........................................................1

1.2 Package List......................................................................... 3

1.3 Layout and Components....................................................... 4

Chapter 2: Hardware Installation...................................................5

2.1 Installing Central Processing Unit (CPU)................................ 5

2.2 FAN Headers....................................................................... 6

2.3 Installing System Memory.................................................... 7

2.4 Connectors and Slots ............................................................ 8

Chapter 3: Headers & Jumpers Setup........................................11

3.1 How to Setup Jumpers.........................................................11

3.2 Detail Settings.....................................................................11

Chapter 4: Useful Help..................................................................17

4.1 Award BIOS Beep Code.......................................................17

4.2 Extra Information................................................................17

4.3 Troubleshooting..................................................................19

Chapter 5: WarpSpeeder™..............................................................20

5.1 Introduction........................................................................20

5.2 System Requirement............................................................20

5.3 Installation..........................................................................21

5.4 [WarpSpeeder™] includes 1 tray icon and 5panels................22

K8M800-M7A

CHAPTER 1: INTRODUCTION

1.1 MOTHERBOARD FEATURES

CPU

SupportsSocket 754.

SupportsAMDAthlon 64 processor up to3700+.

SupportsAMD Sempronprocessor.

SupportsHyperTransportTechnologyupto1600MT/s.

Chipset

North Bridge:VIAK8M800.

South Bridge:VIAVT8237R/VT8237RPLUS.

Dimensions

MicroATX Form Factor: 18.999cm (W) x 24.384cm (L)

Operating System Supporting

SupportsWindows98 /Me /2000/ XP /64-bit.

Slot

Three 32bitPCIbusmaster slots.

OneAGP4x/8x compatible slot.

One CNR slot.

On-board IDE

Two on-board connectorssupport4 IDEdiskdrives.

SupportsPIOmode0~4.

SupportsUltra DMA 33/66/100/133 BusMaster Mode.

System Memory

Supports up to 2 DDR devices.

Supports DDR-266/333/400.

Maximum memory size isup to 2GB. (Following table isonly for

reference.)

DIMM Socket

Location DDR Module Total MemorySize

DIMM1 128MB/256MB/512MB/1GB *1

DIMM2 128MB/256MB/512MB/1GB *1

Max is 2GB.

K8M800-M7A

Super I/O

Chip: ITE IT8705AF.

Low PinCount Interface.

Providesthemost commonly usedlegacySuper I/O

functionality.

Environment Controlinitiatives,

 H/W Monitor

 Fan Speed Controller

 ITE's"Smart Guardian" function

Onboard AC’97 Sound Codec

Chip: REALTEK ALC655.

Support6 channels.

SupportsS/PDIFoutfunction.

Compliant withAC’97 Version 2.3 specification.

Onboard Serial ATA

Controllerintegratedin VT8237R (VT8237R PLUS).

SupportsRAID 0and RAID1 functions.

Supports2 serial ATA (SATA) ports.

-Data transfer ratesup to 150 MB/s.

-Compliant withSATAVersion1.0 specification.

10/100 LAN PHY

PHY: RTL8201BL/CL.

Supports10Mb/sand 100Mb/sauto-negotiation.

Half/Full duplex capability.

SupportsACPI, PCIpower management.

K8M800-M7A

InternalOn-boardI/O Connectors and Headers

1 front panel header supportsfrontpanel facilities.

1 CD-in connector supports1 CD-ROMaudio-in device.

1 front audio header supportsfrontpanel audiofunction.

1 S/PDIF-Out connector supportsdigital audio-outfunction.

1 chassisopen header supportsPC case-opened warning

function.

1 FDD connector supports2 Floppydriveswith360K,720K,

1.2M,1.44M and 2.88Mbytes.

2 IDE connectorssupport 4 hard diskdevices.

2 Serial ATAconnectorssupport 2SATAdevices.

2 USBheaders support4 USB2.0 portsat frontpanel. (JUSB3

isoptional)

Back Panel I/O Connectors

2 USB2.0ports.

1 VGAport.

1 Serial port.

1 Game port.

1 Printer port.

1 RJ-45 LANjack.

1 PS/2Mouse port.

1 PS/2Keyboardport.

1Audio portincluding 1 Speaker-out connector, 1Line-in

connector,and 1MIC-in connector.

Line InSpeaker Out MicIn

LAN

USB x2

PS/2

Keyboard

PS/2

Mouse Print er port

COM1

VGA1

GAME Port

1.2 PACKAGE LIST

HDD cable x1

User’s Manual x1

Fully Setup Driver CD x1

Rear I/O panel forATX case x1

FDD cable x1(optional)

USB 2.0 cable x1 (optional)

Serial ATAcable x1(optional)

S/PDIF out cable x1 (optional)

K8M800-M7A

1.3 LAYOUT AND COMPONENTS

DIMM1

DIMM2

FD D1

K8M800

VT8237R/

VT8237R PLUS

JATXPWR1

JCDI N1

JUSB2 JUSB3(optional)

JUSBV2

JSATA2

JSATA1

JCM OS1

JCI1

JCFAN1

JSFAN1

Codec JPANEL1

LAN

PHY

Super I/O

BIOS

BAT1

Socket 754

CPU1

JUSBLAN1

CNR1

PCI1

PCI3

PCI2

AGP1

JKBMS1

JAUDIO2

JSPDIF_OUT1

JATXPWR2

JPRNT1

JCOM1JVGA1

JUSBV1

JGamePort

JAUD_GAME

JUSB1

ID E2

ID E1

Note: ■representsthe 1st pin.

K8M800-M7A

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRALPROCESSINGUNIT (CPU)

Step 1:Pull thelever towarddirection Afrom the socket and then raise the

lever up toa 90-degree angle.

Step 2: Lookforthe whitetriangle on socket, and the gold triangle on

CPU should pointforwardsthiswhite triangle.The CPU will fit

onlyin thecorrectorientation.

Step 3: Hold the CPUdownfirmly, andthen close the lever tocomplete

theinstallation.

Step 4: Put the CPU Fan on the CPUand buckle it. Connect the CPU

FAN power cable to the JCFAN1.Thiscompletesthe installation.

K8M800-M7A

2.2 FAN HEADERS

These fan headerssupport cooling-fansbuiltin thecomputer.The fan

cable and connectormaybe different according tothe fanmanufacturer.

Connect the fancable to the connector whilematchingthe blackwireto

pin#1.

JCFAN1: CPU Fan Header

JSFAN1: System Fan Header

Assignment

1 Ground

2 +12V

JSFAN1

JCFAN1

3 FAN RPMrate

sense

Note:

The JCFAN1 and JSFAN1 support 3-pin head connector. When connecti ng with wires

onto connectors, please note that the red wire is the positive and s hould be connected to

pin#2, and the black wire is Ground and should be connected to GND.

K8M800-M7A

2.3 INSTALLING SYSTEM MEMORY

DIMM1

DIMM2

1. Unlocka DIMM slotbypressing the retaining clipsoutward.Aligna

DIMM on the slotsuch thatthenotchon the DIMM matchesthe

breakontheSlot.

2. Insert theDIMM verticallyand firmlyintotheslotuntil the retaining

chip snap backin placeand the DIMM isproperly seated.

K8M800-M7A

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector

Themotherboard providesa standard floppydiskconnectorthat

supports360K,720K,1.2M,1.44M and2.88M floppydisktypes.

Thisconnector supportsthe provided floppydrive ribbon cables.

34 33

IDE1/IDE2: Hard Disk Connectors

Themotherboard hasa32-bitEnhancedPCI IDE Controller that

providesPIOMode 0~4,BusMaster, and UltraDMA33/66/100/133

functionality. It has two HDD connectors IDE1 (primary) and IDE2

(secondary).

The IDEconnectorscan connecta master and a slave drive, so

you can connectuptofourhard diskdrives. The first harddrive

should alwaysbe connectedtoIDE1.

IDE2IDE1

3940

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar H55 HD Manual de usuario

Biostar

Biostar BICHT-PBA Manual de usuario

Biostar

Biostar MCP6P M2 PLUS Guía del usuario

Biostar

Biostar A620MP-E PRO Manual de usuario

Biostar

Biostar Hi-Fi B85S1 Guía del usuario

Biostar

Biostar A780L Guía del usuario

Biostar

Biostar Racing X570GTA Manual de usuario

Biostar

Biostar TH67XE - BIOS Guía del usuario

Biostar

Biostar P43D3+ Guía del usuario

Biostar

Biostar M5ATA Manual de usuario

Biostar

Biostar TFORCE 6100 Manual de usuario

Biostar

Biostar TA75M Guía del usuario

Biostar

Biostar TA785G3 HD - BIOS Guía del usuario

Biostar

Biostar P4TSE Pro Guía del usuario

Biostar

Biostar TPower I45 Guía del usuario

Biostar

Biostar GF7100P-M7 - BIOS SETUP Manual de usuario

Biostar

Biostar CX70M-PE Guía del usuario

Biostar

Biostar A960G Manual de usuario

Biostar

Biostar B760T-SILVER Manual de usuario

Biostar

Biostar H110MHC Manual de usuario

Biostar

Biostar M7TDA Manual de usuario

Biostar

Biostar TB360-BTC D+ Manual de usuario

Biostar

Biostar Hi-Fi H81S2 Manual de usuario

Biostar

Biostar G965 MICRO 775 Guía del usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario