Biostar I945G-M7 Manual de usuario

I945G-M7

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction.......................................................... 1

1.1 Motherboard Features..........................................................1

1.2 Package Checklist................................................................4

1.3 Layout and Components ......................................................5

Chapter 2: Hardware Installation........................................... 6

2.1 Installing Central Processing Unit (CPU) .............................6

2.2 FAN Headers........................................................................8

2.3 Installing System Memory ....................................................9

2.4 Connectors and Slots.........................................................10

Chapter 3: Headers & Jumpers Setup................................. 12

3.1 How to Setup Jumpers.......................................................12

3.2 Detail Settings ....................................................................12

Chapter 4: Useful Help ......................................................... 18

4.1 Award BIOS Beep Code.....................................................18

4.2 Extra Information................................................................18

4.3 Troubleshooting..................................................................20

Chapter 5: WarpSpeeder™.......................................... 21

5.1 Introduction.........................................................................21

5.2 System Requirement..........................................................21

5.3 Installation...........................................................................22

5.4 [WarpSpeeder™] includes 1 tray icon and 5 panels..........23

I945G-M7

CHAPTER 1: INTRODUCTION

1.1 MOTHERBOARD FEATURES

A. Hardware

CPU

Supports LGA 775.

Supports Intel Pentium 4 processor up to 3.8GHz.

Supports Intel Pentium D processor.

Front Side Bus at the following frequency ranges:

 533MT/s (133MHz Core Clock)

 800MT/s (200MHz Core Clock)

 1066MT/s (266MHz Core Clock)

Supports Hyper-Threading Technology. (HT)

Supports Execute Disable Bit Technology (XD).

Supports Enhanced Intel SpeedStep® Technology (EIST).

Supports Intel Extended Memory 64 Technology (Intel EM64T).

Chipset

North Bridge: Intel 945G.

South Bridge: Intel ICH7.

Dimensions

Micro ATX Form Factor: 24.45cm (W) x 24.4cm (L)

Operating System Supporting

Supports Windows 2000, and Windows XP.

Super I/O

Chip: ITE IT8712F.

Low Pin Count Interface.

Provides the most commonly used legacy Super I/O

functionality.

Environment Control initiatives,

 H/W Monitor

 Fan Speed Controller

 ITE's "Smart Guardian" function

I945G-M7

System Memory

Supports dual channel DDR2 up to 8 banks.

Supports DDR2 533 (266MHz) / 667 (333MHz) for a theoretical

maximum bandwidth of 10.7 GB/s.

Supports 256-Mb, 512-Mb, or 1G-Mb technologies for x8

and x16 devices.

Supports non-ECC DIMMs.

Maximum DRAM space is up to 4GB.

DIMM Socket

Location DDR Module Total Memory Size

DDR2_A1 128MB/256MB/512MB/1GB *1

DDR2_A2 128MB/256MB/512MB/1GB *1

DDR2_B1 128MB/256MB/512MB/1GB *1

DDR2_B2 128MB/256MB/512MB/1GB *1

Max is 4GB.

On Board IDE

One on-board connector supports 2 devices.

Supports PIO Mode 0~4

Supports Ultra DMA 33/66/100 Bus Master Mode.

On Board AC’97 Sound Codec

Chip: REALTEK ALC655.

Support 6 channels.

Supports S/PDIF-Out and S/PDIF-In (optional) functions.

Compliant withAC’97 Version 2.3 specification.

Expansion Slots

Two 32bit PCI bus master slots.

One PCI-Express x16 slot.

One PCI-Express x1 slot.

10/100 LAN

PHY: RTL8100C.

Supports 10 Mb/s and 100 Mb/s auto-negotiation.

Half/Full duplex capability.

SupportsACPI power management.

I945G-M7

Gigabit LAN (optional)

Chip: RTL8110S.

Half/Full duplex capability.

Supports 10 Mb/s, 100 Mb/s and 1Gb/s auto-negotiation.

SupportsACPI power management.

Serial ATA

Controller integrated in ICH7.

Supports 4 Serial ATA (SATA) devices.

-Compliant with SerialATA 2.0 specification.

-Data transfer rate up to 3GB/s.

Internal On-board I/O Connectors and Headers

1 IDE connector supports 2 hard disk devices.

1 front panel header supports front panel facilities.

1 CD-in connector supports 1 CD-ROM audio-in device.

1 front audio header supports front panel audio-out function.

1 S/PDIF-out connector supports digital audio-out function.

1 S/PDIF-in connector supports digital audio-in function.

(optional)

1 chassis open header supports PC case-opened warning

function.

1 Floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M

and 2.88Mbytes.

2 USB headers support 4 USB 2.0 ports.

4 Serial ATA connectors support 4 SATA devices.

I945G-M7

Back Panel I/O Connectors

1 Serial port.

1 Parallel port.

1 RJ-45 LAN jack.

1 PS/2 Mouse port.

1 PS/2 Keyboard port.

4 USB 2.0 ports.

1 vertical audio port including 1 line-in connector, 1 line-out

connector, and 1 MIC-in connector.

COM1

VGA1

Parallel

USB x2

LAN

USB x2

Line In/

Surround

Line Out

Mic In 1/

Base/Center

PS/2

Keyboard

PS/2

Mouse

B. BIOS & Software

BIOS

Award legal BIOS.

Supports APM1.2.

Supports ACPI

Supports USB Function.

Software

Supports Warpspeeder™, 9th Touch™, WINFLASHER™ and

FLASHER™.

1.2 PACKAGE CHECKLIST

FDD Cable X 1

HDD Cable X 1

User’s Manual X 1

SerialATA Cable X 1

Fully Setup Driver CD X 1

Rear I/O Panel for ATX Case X 1

USB 2.0 Cable X1 (optional)

S/PDIF Cable X 1 (optional)

SerialATA Power Switch Cable X 1 (optional)

I945G-M7

1.3 LAYOUT AND COMPONENTS

DDR2_A1

DDR2_A2

DDR2_B1

DDR2_B2

FDD1

PCI-EX1_1

PCI-EX16

PCI1

PCI2

JPANEL1

JATXPWR1

JCFAN1

JATXPWR2

JCI1

JCMOS1

SATA1

SATA3

SATA2

SATA4

Codec

JCDIN1

JSFAN1

LAN

BAT1

BIOS

Intel

ICH7

LGA775

CPU1

Intel

945G

JAUDIO2

Super

I/O

JKBMS1

JRJ45USB1

COM1

JCOM1

JVGA1

JAUDIO1

JPRNT1

JSPDIF_OUT1 JSPDIF_IN1

(optional)

IDE1

JDJ1

(optional)

J_CIR1

(optional)

Note: ■represents the 1st pin.

I945G-M7

Pin Cap

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

CPU1

COM1

Step 1: Pull the lever sideways away from the socket and then raise the

lever up to a 90-degree angle.

Special Notice:

Remove Pin Cap before installation, and make

good preservation for future use. When the CPU

is removed, cover the Pin Cap on the empty

socket to ensure

in le

s won’t be dama

ed.

I945G-M7

Step 2: Look for the black cut edge on socket, and the white dot on CPU

should point forwards this black cut edge. The CPU will fit only in

the correct orientation.

Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then close the lever to complete

the installation.

Step 4: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the JCFAN1. This completes the installation.

I945G-M7

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: CPU Fan Header

Assignment

1 Ground

2 Power

3 FAN RPM rate

sense

JCFAN1

COM1

4 Smart Fan

Control

JSFAN1: System Fan Header

Assignment

1 Ground

2 +12V

JSFAN1

COM1

3 FAN RPM rate

sense

Note:

The JCFAN1 and JSFAN1 support system cooling fan with Smart Fan Control utility. It

supports 4-pin and 3-pin head connector. When connecting with wires onto connectors,

please note that the red wire is the positive and should be connected to pin#2, and the

black wire is Ground and should be connected to GND.

Otros manuales para I945G-M7

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar G41D-M7 Guía del usuario

Biostar

Biostar TA880GB - BIOS Guía del usuario

Biostar

Biostar TP55 - BIOS Manual de usuario

Biostar

Biostar BICHT-PBA Manual de usuario

Biostar

Biostar TForce P965 Deluxe Guía del usuario

Biostar

Biostar M7 VIK Manual de usuario

Biostar

Biostar TA785G3 PLUS - BIOS Manual de usuario

Biostar

Biostar B760MXC2 PRO D4 Manual de usuario

Biostar

Biostar M7 VKQ Manual de usuario

Biostar

Biostar B560M-SILVER Manual de usuario

Biostar

Biostar H170GTN Manual de usuario

Biostar

Biostar P4TGV-R Manual de usuario

Biostar

Biostar M5ATA Manual de usuario

Biostar

Biostar MCP6P3 Guía del usuario

Biostar

Biostar M6TZF Manual de usuario

Biostar

Biostar 865G MICRO 775 Guía del usuario

Biostar

Biostar N3700NH Guía del usuario

Biostar

Biostar TA75A+ Guía del usuario

Biostar

Biostar TA790GXB A2 PLUS - BIOS Manual de usuario

Biostar

Biostar A740G3L - BIOS Manual de usuario

Biostar

Biostar M6VBA Manual de usuario

Biostar

Biostar B650MP-E PRO Manual de usuario

Biostar

Biostar A770E - BIOS Guía del usuario

Biostar

Biostar I945G-M7 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario