Biostar BIPV10-IAP Guía del usuario

BIPV10-IAP Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the

contents here and specially disclaims any implied warranties of merchantability

or fitness for any purpose. Further the vendor reserves the right to revise this

publication and to make changes to the contents here without obligation to

notify any party beforehand.

Duplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be responsible for any mistakes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ........................................ 2

1.1 Before You Start ................................................................................ 2

1.2 Package Checklist............................................................................. 2

1.3 Mainboard Specification................................................................... 3

1.4 Rear Panel.......................................................................................... 4

1.5 Mainboard Layout ............................................................................ 6

Chapter 2: Installation.......................................... 7

2.1 CPU...................................................................................................... 7

2.2 Fan Header......................................................................................... 7

2.3 System Memory.................................................................................. 8

2.4 Power Supply ..................................................................................... 9

2.5 Onboard Slot/Connector/Header/Jumper.................................... 10

Chapter 3: BIOS Setup ........................................ 23

3.1 Main Menu........................................................................................ 25

3.2 Advanced Menu............................................................................... 28

3.3 PCI/PnP Menu.................................................................................. 39

3.4 Boot Menu ........................................................................................ 42

3.5 Chipset Menu.................................................................................... 44

3.6 Exit Menu.......................................................................................... 49

Chapter 4: Useful Help ........................................ 53

4.1 Driver Installation Note.................................................................. 53

4.2 AMI BIOS Beep Code....................................................................... 54

4.3 Troubleshooting............................................................................... 55

Mini-ITX Mainboard Manual

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Thank you for choosing our product. Before you start installing the

mainboard, please make sure you follow the instructions below:

Prepare a dry and stable working environment with

sufficient lighting.

Always disconnect the system from power outlet

before operation.

Before you take the mainboard out from anti-static

bag, ground yourself properly by touching any safely

grounded appliance, or use grounded wrist strap to

remove the static charge.

Avoid touching the components on mainboard or the

rear side of the board unless necessary. Hold the board

on the edge, do not try to bend or flex the board.

Do not leave any unfastened small parts inside the

case after installation. Loose parts will cause short

circuits which may damage the equipment.

Keep the system from dangerous area, such as heat

source, humid air, and water.

Please switch on/off the machine normally. That is, DO

NOT pull out power cord directly from the mainboard

or the system may damage.

1.2 PACKAGE CHECKLIST

Mini-ITX Mainboard x 1

Fully Setup Driver CD x 1

I/O Bracket x 1

SATA Cable x 1 (Optional)

BIPV10-IAP

1.3 MAINBOARD SPECIFICATION

Specif ica tio n

CPU

Intel Atom CPU On-board

D425 @1.8GHz (TDP 10W)

Pineview-D Processor

Optional for:

N455 @1.66GHz (TDP 6.5W)

N550 dual core @1.5GHz (TDP 8.5W)

D525 dual core @ 1.8GHz (TDP 13W)

FSB Supports up 800 MHz

Chipset Intel NM10 Express Chipset

Graphic Intel Pineview-D integrated graphics engine

Max Shared Video Memory is 384 MB

--LVDS by CH7036 (24 bit single CH,

support up to 1366x768)

--Integrated VGA scale up to SXGA+

1400x1050)

Super I/O

ITE IT8728 + FINTEK F81216D

Provides the most commonly used legacy

Super I/O functionality.

128pin type

Environment Cont rol in it iat ives,

H/W Monitor

Fan Speed Controller

Main

Memory

SO-DIMM (204pin) Slot x 1

Supports DDR3 800 MHz

DIMM supports 512MB / 1GB / 2GB / 4GB

Max Memory Capacity 4GB

Registered DIMM or ECC DIMM is not

supported

* N455/N550 only support up to 2GB

SATA Chips et built - in Serial ATA controller SATA Version 2.0 specific ation compliant

Data transfer rates up to 3.0 Gb/s

LAN Realtek RTL 8111E 10 / 100 / 1000 Mb/s auto negotiation

Ha lf / Fu ll dup lex capab ility

Sound

Codec

Realtek ALC662

5.1 channels audio out (only for x3 audio

jack version)

High- Defin ition A udio s uppo rt

Amplifier Realtek ALC105 Class D, 2 channel Max. 2.8W

PCI slot x1

PCI Express x1 Slot x1Slot

Mini PCI-E Slot x1

SATA2 Connector x2

Power Connector for SATA x1

Front Panel Header x1

Parallel Connector x1

Digital I/O Connector x1

System Fan Header x2

On Board

Connectors

& Headers

Clear CMOS Header x1

Mini-ITX Mainboard Manual

Specif ica tio n

Speaker Box Connector x1

Amplifier Connector x2

PS/2 Keyboard/Mouse Connector x1

AT/ATX Power Switch Header x1

USB 2.0 Connector x1

LVDS Connector x1

LCD Power Select Header x1

LCD Backlight Power ON/OFF Header x1

LCD Backlight Inverter Connector x1

Inverter Power Select Header x1

Backlight Brightness Adjust Header x1

Serial Connectors (RS-232) x3

Power Connector (4pin) x1

Back Panel

I/O

DC Jack x1

RJ-11 Port x1

PS/2 Keyboard x1

Serial Port x3

VGA Port x1

RJ-45 Port x1

USB2.0 Port x4

Audio Jack (Line-out/Mic) x2

for cash drawer

Optional for x 3 (Line-in/Line-out/Mic)

Board Size

170 mm (W) x 170 mm (L) Mini-ITX

Support

Windows XP/XPE, Linux Biostar reserves the right to add or remove

support for any OS with or without notice.

1.4 REAR PANEL

PS/2

Keyboard JCOM1B

Mic In

(Center/SUB)

Line Out

(F r on t )

USB 2.0 x 2 JCOM1A

RJ-45

VGA

COM3

DC RJ-11 USB 2.0 x 2

BIPV10-IAP

(1) DC 12V-in pin define

Pin Assignment

1 +12V DC_In

2 GND

3 GND

4 +12V DC_IN

Pin 4

(2) RJ-11 pin define (Pin #1 ~6 from right to left)

Pin 1

Pin 6

Ver. 1.0

Pin Define Status Pin Control Pin GPIO ADD

1 CASE OPEN#2 CASE OPEN#2 --- 63 A25H (bit3)

2 CASH1 _P --- CASH1 _P 40 A23H (bit0)

3 CASE OPEN# CASE OPEN# --- 36 A22H (bit6)

4 CASH_PWR --- --- --- ---

5 CASH2_P --- CASH2_P 47 A23H (bit7)

6 GND --- --- --- ---

Ver. 1.2

Pin Define Status Pin Control Pin GPIO ADD.

1 CASE OPEN#2 CASE OPEN#2 --- 63 A25H (bit3)

2 CASH1 _P --- CASH1 _P 14 A20H (bit4)

3 CASE OPEN# CASE OPEN# --- 64 A25H (bit4)

4 CASH_PWR --- --- --- ---

5 CASH2_P --- CASH2_P 47 A23H (bit7)

6 GND --- --- --- ---

Mini-ITX Mainboard Manual

1.5 MAINBOARD LAYOUT

JP 9

CN1

JVGA1

US B_

KBMS1

JRJ45US B1

JCOM1

JAUDIO2

JCOM 5

JCOM6JCOM4

JPC5

JPC4

JPC6

JP1

JSFA N1

BAT1

SATA2

SATA1

JPRNT1

JDIO1

JP C2

JP C1

JSPK2

JSPK1

PCI1

PE1

JAT1

JCMOS 1

JPANEL1

BIOS

JSFAN2

JUSB1

J HDD1

LVDS -OUT 1

JC1

JBL1

JBL2

PEX1

DIMMA1

JKBMS1

JSPK3

JP WR1

JLV1

JPC3

JLV2

Intel

Atom

CPU

CPU1

NM10

Note: represents the 1■st pin.

BIPV10-IAP

CHAPTER 2: INSTALLATION

2.1 CPU

The mainboard includes an embedded Intel Atom N455/N550/D525/D425

processor, and a heatsink has been installed to provide sufficient cooling.

2.2 FAN HEADER

The fan header supports cooling-fans built in the system. The fan cable

and connector may be different due to the fan manufacturer.

JSFAN1: System Fan Header

Pin Assignment

1 Ground

2 +12V Smart

Fan Control (By

Fan)

3 FAN RPM rate

sense

JSFAN2: System Fan Header

Pin Assignment

1 Ground

2 +12V

3 FAN RPM rate

sense

Note:

System Fan Headers support 3-pin head connectors. When connecting with wires onto

connectors, please note that the red wire is the positive and should be connected to

pin#2, and the black wire is Ground and should be connected to GND.

Mini-ITX Mainboard Manual

2.3 SYSTEM MEMORY

DIMMA1: Memory Module (204pin SO-DIMM)

2 Align a DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

3 Insert the DIMM firmly into the slot until the retaining chip snap back in

place and the DIMM is properly seated.

Memory Capacity

DIMM Socket Location DDR3 Module Total Memory Size

DIMMA1 512MB / 1GB / 2GB / 4GB Max is 4GB.

BIPV10-IAP

2.4 POWER SUPPLY

JPWR1: ATX Power Source Connector (4-pin)

This connector provides +12V to system power circuit.

Assignment

1 +12V

2 +12V

3 Ground

4 Ground

JHDD1: SATA Power Connector

This connector provides power connection of SATA devices.

Pin Assignment

1 +12V

2 GND

3 +3.3V

4 +5V

1 4

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Biostar

Biostar

Biostar P4 SFA Guía del usuario

Biostar

Biostar M7 VKH Manual de usuario

Biostar

Biostar G31-M7 TE - BIOS Manual de usuario

Biostar

Biostar A57A Guía del usuario

Biostar

Biostar M7VIZ-SATA Manual de usuario

Biostar

Biostar H61MHP Manual de usuario

Biostar

Biostar P4TCA PRO Guía del usuario

Biostar

Biostar GF7050V-M7 Guía del usuario

Biostar

Biostar TPOWER N750 Guía del usuario

Biostar

Biostar P4TSG PRO Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Biostar

Biostar M7VIW-D Guía del usuario

Biostar

Biostar M7 VKS Manual de usuario

Biostar

Biostar A960G Guía del usuario

Biostar

Biostar H310MHP 3.0 Manual de usuario

Biostar

Biostar M7VIG Pro-D Guía del usuario

Biostar

Biostar NF520-A2 TE - BIOS SETUP Manual de usuario

Biostar

Biostar G31-M7 Guía del usuario

Biostar

Biostar Hi-Fi Z97WE Guía del usuario

Biostar

Biostar Z590GTA Manual de usuario

Biostar

Biostar NF520D3 - BIOS Guía del usuario

Biostar

Biostar TPOWER I55 Guía del usuario

Biostar

Biostar H81MHP Guía del usuario

Biostar

Biostar B560M-SILVER Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario