Biostar G31-M7 Guía del usuario

G31-M7 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant toPart15 of the FCC Rules.T hese limits are designed

to provide re asonable protec tion against harmful interference in a residential

installation. This equipment generates, uses, and c an radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.There is no guarantee

that interfe rence will not occur in a particular ins tallation.

The vendor makes no representa tio ns o r warranties with respec t to the

contents here andspecially disclaims any implied warranties ofmerchantability

o r fi tn es s fo r a ny p u rp os e . F u rt he r t he ve nd o r res e rves t he ri g ht to rev is e t h is

publication and to make changes to the contents here without obligation to

notify any party beforehand.

D uplication of this publication, in part or in whole , is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be res ponsible for any mis takes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

All manuals and user guides at all-guides.com

all-guides.com

Table of Contents

Chapter 1: Introduction.....................................................1

1.1 Be fore You Start................................................................... 1

1.2 Package Checklist................................................................ 1

1.3 Motherboard Features.......................................................... 2

1.4 Re ar Panel Co nne ctors.......................................................... 3

1.5 Mothe rboard Layout ............................................................ 4

Chapter 2: Hardware Installation........................................5

2.1 Installing Central Processing Unit (CPU)................................ 5

2.2 FAN Headers........................................................................ 7

2.3 Installing System Memory...................................................... 8

2.4 Connectors and Slots ............................................................10

Chapter 3: Headers & Jumpers Setup................................. 12

3.1 How to Setup Jumpers..........................................................12

3.2 Detail Settings.....................................................................12

Chapter 4: Useful Help.....................................................18

4.1 Driver Installation Note .......................................................18

4.2 AMI BIOS Beep Code............................................................19

4.3 Extra Information................................................................20

4.4 Troubleshooting...................................................................22

Appendencies: SPEC In Other Language.............................24

German................................................................................................24

France..................................................................................................26

Italian..................................................................................................28

Spanish ................................................................................................30

Portuguese...........................................................................................32

Polish...................................................................................................34

Russian................................................................................................36

Arabic..................................................................................................38

Japanese ..............................................................................................40

All manuals and user guides at all-guides.com

G31-M7

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk you for choosing our pro duct. Be fore you start installing the

mo the rboa rd , plea se make su re you fo llo w the ins tru ctio ns be lo w:

Prepare a dry and stable working environment with

s uf fi cie nt ligh ting .

Always disconnect the computer from power outlet

be fo re ope ra tion.

Befo re you take the mo the rboa rd ou t f rom a n ti-s ta tic

bag, ground yourself properlyby touching anysafely

grounde d appliance, or use grounded wrist strap to

remove the static charge.

Avo id tou ch ing the compone nts o n m o the rboa rd o r the

rear side of the board unless necessa ry. Hold the bo ard

on the edge , do not try to be nd or flex the board.

Do no t leave any unfastene d small parts inside the

case after installation. Loose parts will cause short

circuits which ma y damage the equipment.

Keep the computer from dangerous area,such as heat

source , humid air and wa te r.

1.2 PACKAGE CHECKLIST

HDD Cable X 1

Se ria l ATA Cab le X 1

User’s Manua l X 1

Fully Setup Driver CD X 1

Rear I/O Panel for ATX Case X 1

FDD Cable X 1 (optional)

USB 2.0 Cable X1 (optional)

S/PDIF Cable X 1 (optional)

Se ria l ATA Po we r Cab le X 1 (o ptio nal)

Note: The package contents may differ by area or your motherboard version.

All manuals and user guides at all-guides.com

Motherboard Manual

1.3 MOT HERBOARD FEAT URES

SPEC

CPU

LGA 775

Intel Core2Duo /Core2Quad/ Celeron 4xx

/ Pentium D / Pentium 4 / Celeron D

processor

Supports Hyper-Threading / Execute Disable Bit /

Enhanced Intel SpeedStep® / Intel Architecture-64 /

Extended Memory 64 Technology / Virtualization

Technology

FSB Support 533 / 800 / 1066 / 1333 MHz

Chipset Intel G31

Intel ICH7

SuperI/O

ITE 8712F

Provides the most commonly usedlegacy

Super I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

HardwareMonitor Controller

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

DIMM Slots x 2

Eac h DIMM s upports 256MB / 512MB /

1GB / 2GB DDR2

Max Memory Capicity 4GB

Dual Channel Mode DDR2memorymodule

Supports DDR2 800/667

Supports DDR2 533 (with FSB 533/1066 CPU)

Registered DIMM and ECC DIMM is not supported

Graphics GMA 3100 Max Shared Video Memory is 256MB

IDE Integrated IDEController Ultra DMA 33 / 66 / 100 Bus Master Mode

supports PIO Mode 0~4

SA TA 2 I nt e gr at e d S eri al ATA C ont r ol ler Datatransfer rates up to 3.0 Gb/s.

SATA Version 2.0specificationcompliant

LAN

Realtek RTL 8101E / 8102E /

8111C (optional)

10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit

bandwidth is for Realtek RTL 8111C only)

Half / Full duplexcapability

Sound

Codec

ALC662 5. 1 channels audio out

High Definition Audio

PCIslot x2 Supports PCI expansion cards

PCI Express x 16 slot x1 Supports PCI-E x16 expansioncardsSlots

PCI Express x 1 slot x1 Supports PCI-E x1 expansioncards

Floppyconnector x1 Eachconnectorsupports 2 Floppy drives

PrinterPort Connector x1 Eachconnectorsupports 1 Printer port

IDE Connector x1 Eachconnectorsupports 2 IDE device

On Board

Connector

SATA Connector x4 Eachconnectorsupports 1 SATA devices

All manuals and user guides at all-guides.com

G31-M7

SPEC

Front Panel Connector x1 Supports front panel facilities

Front Audio Connector x1 Supports front panel audio function

CD-in Connector x1 Supports CD audio-in function

S/PDIF out connector x1 Supports digital audio out function

CPU Fan header x1 CPU Fan power s upply (with Smart Fan function)

System Fan header x1 System Fan Power supply

Clear CMOS header x1 Restore CMOS data to factory default

USB connector x2 Eachconnectorsupports 2 front panelUSB ports

Power Connector (24pin) x1 Connects to Power supply

Power Connector (4pin) x1 Connects to Power supply

Back Panel

I/O

PS/2Keyboard x1

PS/2 Mouse x1

S e ri al Po rt x 1

VGA port x1

LAN port x1

USB Port x4

Audio Jack x3

Connects to PS/2 Keyboard

Connects to PS/2 Mouse

Provide RS-232 Serial c onnection

Connect to D-SUB monitor

Connect to RJ-45 ethernet cable

Connectto USB devices

Provide Audio-In/O ut and microphone connection

Board Size 195 (W) x 244 (L) mm

OS Support Windows 2000 / XP / VISTA BiostarReserves the right toadd or removesupport for

any OS with orwithout notice

1.4 REAR PANEL CONNECT ORS

PS/2

Mouse

P S/ 2

Keyboard

USBX2USBX2

LA N

COM1 VGA

Line In/

Surround

Line Out

Mic In 1/

Bass/ Center

Since t he audio c hip s up ports High Definiti on Audio Specific atio n, t he func tion of eac h a udi o

jack c an be d efine d b y sof tw are. T he in pu t / out pu t fu ncti o n o f e ach au dio jac k l isted ab o ve

r eprese nts th e d ef aul t s etti ng . Ho we ver , w he n co nnec ting e xt er nal micr oph on e t o th e a udi o por t ,

pleas e us e t he Line In ( blue) an d Mic In ( Pi n k) au dio jac k.

All manuals and user guides at all-guides.com

Motherboard Manual

1.5 MOT HERBOARD LAYOUT

JKB MS1

JCO

JVGA1

JUSB2

JRJ45US B1

FDD1

IDE1

DDR2_B1

DDR2_A1

LGA775

CPU1

PE X16 _1

PCI1

PCI2

BAT1

JAUDIOF1

J CDI N 1

JSPDIF_OUT1

JUS B4JUS B3

JSFAN1

SATA 1

SATA2

SATA3

SATA4

JPA NEL1

JCM OS1

JATXPWR1

JCFAN1

JATXPWR2

Intel

G31

Intel

ICH7

Codec

LAN

S uper

I/ O

JAUDIO1

PEX1_1

BI O S

JUSBV2

JUS BV1

Not e: ■represents the 1st

pin.

All manuals and user guides at all-guides.com

all-guides.com

G31-M7

CHAPTER 2: HARDWARE INSTALLATION

2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)

Special Notice:

Remove Pin Cap before installation, and make good preservation

for future use. When the CPU is removed, cover the Pin Cap on the

empty socket to ensure pin legs won’t be damaged.

Pin-Cap

Step1:Pull the socket locking lever out from the socket and then raise

the lever up to a 90-degree angle.

All manuals and user guides at all-guides.com

Motherboard Manual

Step 2: Look for the triangular cut edge on socket, and the golden dot on

CPU should point forwards this triangular cut edge.The CPU will

fit only in the correct orientation.

Step 2-1:

Step 2-2:

Step 3: Hold the CPU down firmly, and then lower the lever to locked

position to complete the installation.

Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it

on the retention frame. Connect the CPU FAN power cable into

the JCFAN1.This completes the installation.

All manuals and user guides at all-guides.com

G31-M7

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: C PU Fan Header

Assignment

1 Ground

2 Power

3 FAN RPM

rate sense

JC FAN1

4 Smart Fan

Control

JSFAN1: System Fan Header

Assignment

1 Ground

2 +12V

JSFAN1

3 FAN RPM

rate sense

Note:

The JCFAN1 su pp or t 4- pi n h ea d co nn ector an d JSFAN1 s up por t 3- pin he ad c on nect or .

Whe n co nn ecti ng wi t h wi r es o nto c on nect or s, pl e ase not e t hat t he r e d wi re is th e p osi ti ve

and sho uld be c on nec ted to pin #2, an d t he blac k wir e i s Gr ound an d sh ould be

conn ecte d t o GN D.

All manuals and user guides at all-guides.com

Motherboard Manual

2.3 INST ALLING SYSTEM MEMORY

A. DDR2 module

DDR2_B1

DDR2_A1

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

All manuals and user guides at all-guides.com

Otros manuales para G31-M7

Tabla de contenidos

Idiomas:

Otros manuales de Placa madre de Biostar

Biostar

Biostar P4M80-M4 Manual de usuario

Biostar

Biostar M7VIZ-SATA Manual de usuario

Biostar

Biostar M7MKE Manual de usuario

Biostar

Biostar GF8100 M2G PLUS - BIOS Manual de usuario

Biostar

Biostar U8668-D Manual de usuario

Biostar

Biostar U8798 Pro Guía del usuario

Biostar

Biostar U8569 Guía del usuario

Biostar

Biostar P4 TSV Manual de usuario

Biostar

Biostar MCP6P-M2 Guía del usuario

Biostar

Biostar M5VNB Manual de usuario

Biostar

Biostar M7NCD Ultra Manual de usuario

Biostar

Biostar GF7025-M2 TE - BIOS SETUP Guía del usuario

Biostar

Biostar H61MH Guía del usuario

Biostar

Biostar K8VGA-M Manual de usuario

Biostar

Biostar Hi-Fi Z97Z5 Guía del usuario

Biostar

Biostar U8598 Manual de usuario

Biostar

Biostar G41D3G PLUS Manual de usuario

Biostar

Biostar N3700NH Manual de usuario

Biostar

Biostar M7VIZ Manual de usuario

Biostar

Biostar B360GT3S Manual de usuario

Biostar

Biostar P43C-A7 - BIOS Guía del usuario

Biostar

Biostar ta320-btc Manual de usuario

Biostar

Biostar H61MHV Manual de usuario

Biostar

Biostar U8568 Guía del usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario