
6
Operating Instructions
1. Insert the power plug into power point.
2. Turn on the main power switch which is under the water proof transparent
cover. Place the blender jar on the base so it feels secure. Make sure the lid
is always secured BEFORE starting the blender.
3. There are three manual speeds - LOW, MEDIUM, HIGH and a pulse button.
Pulse is HIGH speed and will operate for as long as you hold the button
down.
4. For TIME operation, there are three choices - 35, 60 and 90 seconds for
automatic blend and shut o.
5. The red LED light will display during operation and after completion of the
selected operation time, you will hear a long-beep.
NOTE: To stop operation at any time simply press any button.
6. A safety overload switch is located under the base of the blender and can
be used if the motor turns o in protection mode.
OPERATING HINTS AND TIPS
• Always place some liquids into the jug when crushing ice.
• Only operate when there are ingredients inside the jug.
• Wait until the motor and blades have stopped until removing the jug.
• Wipe o all water from the container cushion before starting the blender.
Any water going into the motor may / will cause damage to the motor.
EN