7
The operating time and speed of the 5 automatic functions are preset. During
operation, the speed can not be adjusted but you can increase the time by
pressing the “+20” button.
Pulse Button
The pulse function can only be started when you press it TWICE once
the blender is activated. The rst press is to activate this button. Once it is
activated, the On/O light will ash and pulse light will be bright. At the same
time, the light will go out and the display screen will show “PULS”. The second
press will let it operate and the screen will show the operating time which
starts from 0:00. For example, the operating time is 3s, when it stops, the
screen will show 0:03. Once the function is over, all the lights will be bright
except the On/O button light and the screen will show 0:00.
The actual operating time of the PULSE is determined by how long you ‘press’
the pulse button.
Only use this button for shorter bursts of blending. For longer blending
requirements, select a function or the 1 minute variable speed settings.
8 Variable Speed Settings
Increase the speed from left to right and decrease the speed from right to
left. There are 8 speeds and the preset operating time for each speed is 1
minute. For your desired texture, heat (soups) or blending preferences, you
can choose to nish after the 1 minute or increase blending time with the +20
button.
During operation, you can adjust the speed by touching the buttons one by
one or sliding directly. Under the manual setting mode, please make sure
the blender runs on low speed for 5 seconds and then increase the speed
gradually.
The speeds for the automatic functions are preset which means this manual
speed setting function can not be used together with an automatic one.
Automatic Function Buttons
SMOOTHIE BUTTON
This function button is designed for making delicious smoothies. The
operating speed and time have already been preset to make the best
smoothie. The preset time is 1 minute. If you are using more than 400g of ice,
it’s a good idea to use the tamper.
EN
