BEROTEC EC 250 Manual de usuario

GasGas / KTM / HUSQVARNA

CUMPAN

BEROTECBEROTEC

Benutzerhandbuch

User Guide

Manuel d‘utilisation

Manuale d‘uso

Manual del usuario

EC 250

EC 300

EX 250

EX 300

EXC 250-TPI

EXC 300-TPI

FE 250i

TE 300i

TX 300i

2-Takt / 2-stroke

BEROTEC

CUMPAN

Installation GasGas / KTM / HUSQVARNA

1. Install CUMPAN Display at desired position

» Look for the blue connector (1) above the cylinder.

» Insert intermediate plug (2) and connect with CUMPAN (black cable) (3)

» Lead cable behind the lamp mask

» Lay cables on the existing cable harness

Video

2. Connect RPM signal

English

4. Connect power

3. Engine temperature sensor (water temperature)

» Behind the lamp mask on the parking light removed

→brown = ground →green = plus

» Install on the water pump housing

» replaces the lower screw of the pump hou-

sing cover M6x20 screw

» Connect engine temperature sensor con-

nector

» Motor protection must not touch the

sensor

» Check the seal at operating temperature!

6. Settings in the „SENS“ menu: // SENSOR → UNI // COUNT → 18 // DAMPING → 200 //

7. Carry out calibration of the gears (see operating instructions)

+49 7262-6168573

info@berotec.de

www.berotec.de

BEROTEC GmbH

Georg-Schlatter-Straße 10

75031 Eppingen

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios para motocicletas de BEROTEC

BEROTEC

BEROTEC CUMPAN FANTIC Caballero 125 Manual de usuario