bemodern Pryzm 1000 Manual de usuario
1
Marble suites
Pryzm 750, 1000
Instructions for installation and use
Patent pending
UK Registered Design
R1 Aug 2019 200792_1
2
Contents
Tech Specs 3
What’s in the Box 4
Installation –Marble 5 - 7
Maintenance 8
200792_1
3
Technical Specification
Fire Description Logs
Dimensions
A B C D
57” IMPERO
PRYZM 5D 1000 L Micro Marble
Floor standing:
complete with
plinth
4 LRG 1320mm 810mm 280mm 1450mm
47” IMPERO
PRYZM 5D 750 L 4 SML 1070mm 810mm 280mm 1200mm
52” CABRINA
PRYZM 5D 750 P
Micro Marble
Floor standing:
complete with
hearth
4 SML 1320mm 1040mm 400mm 1320mm
48” ALESSO
PRYZM 5D 750 P
Micro Marble
Floor standing:
complete with
hearth
4 SML 1220mm 1000mm 400mm 1220mm
200792_1
4
What’s in the box(s)
Mantle Hooks (x2)
Un-installed Fire
Batteries (x2)
Logs
4 Logs Located under the
surround or in the leg of surround
(dependent on model)
Installation Booklet x2
Remote control
200792_1
or
15mmScrews (x6)
750 1000
AAA
5
Installation –Marble with Plinth
1. Secure hearth
2. Secure the Hearth
Before the surround can be installed, consideration will need to be given routing the
power supply to the fire. This will affect the stages of the installation process. We advise
a qualified electrician conduct any electrical parts of the installation.
Ensure that the hearth is level and firmly
secured in the desired position on a bed of
suitable mortar. See diagram 6
200792_1
The top of the leg sections have angle
brackets fitted for securing direct to the wall
(see diagram 7).
These fixing brackets will prevent the surround
from detaching itself from the wall.
4. Top Bracket
Diagram 6
Diagram 8 illustrates how the angle brackets
(fitted to the internal leg of the surround) are
secured behind the hook brackets at the
final fitting stage. This is achieved by carefully
positioning the surround on the hearth in its
intended position and marking the position of
the hook bracket screw holes through the
central opening in the surround.
3. Angle Brackets
Diagram 8
(all dimension in mm)
Diagram 7
Note: the surround is a two adult person lift.
A second person will be required to support
the surround.
6
Installation –Marble continued
5. Fix Hook Brackets
6. Secure surround in place
Remove the surround and securely fix the
hook brackets to the wall using appropriate
fixings (see ‘Important Note’ on page 7).
Prior to installing the marble surround please
remove the magnetic trim and place safely
for use in step 8.
Once the wall brackets are secured in place,
carefully lift the surround over the hearth and
lower the surround down, locating the
angled brackets on the hook brackets
securely.
200792_1
The Pryzm fire can be installed in the surround by
lifting the fire at a slight angle to allow the fire to
be positioned in the upper section of the
surround opening. Then angle the rear of the fire
in to the surround, lowering the fire down on the
plinth support brackets. Great care must be
taken, not to crush or damage the cable on
installation or damage the hearth.
Note: The fire power cable may need
positioning in place prior to the installation of
the surround upper body, if the plug is to be
used.
7. Installing the fire
To secure the fire in place, pilot hole the fixing
locations then screw the fire to the timber
mounting panels through the fire mounting
points (6 fixing screws are supplied). Once the
fire is secured in position the fire trim can then
be placed in position. The trim is a magnetic
fixing.
8. Secure fire
Diagram 9
Diagram 10
Diagram 11
Diagram 12
7
Installation –Marble continued
9. Installation Complete For dressing the logs and fire operation,
please refer to the separate fire instructions.
200792_1
Diagram 13
8
Maintenance
WARNING: Before any maintenance or whilst cleaning the exterior of the fireplace, the
unit should be disconnected from the power supply until it has cooled down.
Cleaning the Fire
Cleaning or polishing products are not recommended. Fingerprints or other marks on
the front glass panel can be removed by a piece of soft, damp, lint-free cloth with a
good quality household glass cleaner. The front glass panel should always be
completely dried with a clean, lint-free cloth or paper towel.
CAUTION: Abrasive cleaners should not be used on the glass panel. Liquids should not
be sprayed directly onto any surface of the unit.
200792_1
Troubleshooting
Should you have any queries regarding this product please contact Customer Services
on 0191 4300901 or email us at customerservices@bemodern.co.uk
Recycling
All cardboard packing is recyclable
IMPORTANT NOTE:
Wall fixings (i.e. screws/wall plugs etc.) are not supplied as these are crucially
dependent upon the type of wall and surface the surround is going to be fixed too.
The installer is therefore responsible for ensuring that suitable fittings are used according
to the particular model to be installed as well as individual fitting situations and
environments. All mechanical fixings, for holding the suite in position, must be secured
to a solid wall or structure.
Otros manuales de Chimenea de interior de bemodern
bemodern
bemodern Arteon Pryzm 10003SL Guía
bemodern
bemodern 2668 Manual de usuario
bemodern
bemodern BM-10 Manual de usuario
bemodern
bemodern Beadnell Manual del propietario
bemodern
bemodern 2599M Manual de usuario
bemodern
bemodern Pryzm 750 Guía
bemodern
bemodern 2983 Manual de usuario
bemodern
bemodern Pryzm Volta 42 Guía
bemodern
bemodern 2603 HE900E Instrucciones de instalación
bemodern
bemodern PRIZM MEDIAVUE Manual de programación
bemodern
bemodern EARDF16NG Guía del usuario
bemodern
bemodern Pryzm 750 Manual de usuario
bemodern
bemodern 580 Deluxe Inset Manual de usuario
bemodern
bemodern BM-06 2 SLIDE Series Manual de usuario
bemodern
bemodern BROSELEY EVOLUTION Canterbury Remote Manual
bemodern
bemodern 2893 Manual de usuario
bemodern
bemodern Elgin & Hall Instrucciones de montaje
bemodern
bemodern 800CF Manual de usuario
bemodern
bemodern 600CF Manual de usuario
bemodern
bemodern Arteon Pryzm 10003SL Guía
