Bemodern Arteon Pryzm 10003SL Guía

Instructions for installation

R1 SEPT 2021

Wall Hung and Floor-Standing Suite

200817

Contents

Technical Specification 3

What’s in the Boxes 4

Installation –Introduction/ Preparation 5

Installation –Preparation Continued….. 6

Installation- Floor Standing Suite 7-9

Installation- Wall Mounted Suite 10-14

Fuel Bed Layout & Log Positioning 15

Replacing the Glass 16

Maintenance 17

200817

Technical Specification

200817

Fire/ Surround Description Logs Dimensions (mm) Unboxed

Weight

A B C D E (Kg)

1000 3SL FIRE/ 46”

Floor-Standing Timber Suite 5 SML + 2

LRG 1098 250 734 300 1162 50

1000 3SL FIRE/ 46”

Wall Hung Timber Suite 5 SML + 2

LRG 1098 250 584 300 1162 42.5

750 3SL FIRE/ 36”

Floor-Standing Timber Suite 5 SML 838 250 734 300 902 41

750 3SL FIRE/ 36”

Wall Hung Timber Suite 5 SML 838 250 584 300 902 35

FIRE Visible Flame Area

(mm)

1000 3SL FIRE W1008 X H296

750 3SL FIRE W748 x H296

Note: The small logs for the 1000 3SL & 750 3SL Fires are different.

Additional box- if purchased:

Flat Pack Plinth- Self Assembly Required

To Suit:

36” Floor-Standing Suite

46” Floor-Standing Suite

200817

What Is In The Boxes?

Please ensure that everything is present before commencing the installation. If anything is missing please call

Customer Services on 01914300901 or email us at customerservices@bemodern.co.uk

Fire/ Surround

Description

Boxed Inside the Fire

Quantity Description

750 3SL FIRE/

36” Wall

Mounted Suite

5 Small Logs

1 Bag Of Crystals

1 Bag Of Pebbles

Bagged Separately

1 Remote Control

2 AAA Batteries

1 Fire Operating

Instruction

1 Foam Strip

Supplied Fixed to Fire Rear

1 Wall Hanging Bracket

Pins, Cams and Dowels

x7 x4

Fire/ Surround

Description

Boxed Inside the Fire

Quantity Description

1000 3SL FIRE/

46” Wall

Mounted Suite

2 Large Logs

5 Small Logs

1 Bag Of Crystals

1 Bag Of Pebbles

Bagged Separately

1 Remote Control

2 AAA Batteries

1 Fire Operating

Instruction

1 Foam Strip

Supplied Fixed to Fire Rear

1 Wall Hanging Bracket x7

Installation- Introduction

200817

Do not attempt to lift from the centre of the surround, instead lift from under the hearth and front edge of the

fire. See Diagram 1.

Note: The Suite is a two adult person lift. A second person will be required to lift and support the pre-assembled

parts during installation.

Before the suite can be installed, consideration will need to be given to routing the power supply to the fire. This

will affect the stages of the installation process. We advise a qualified electrician to conduct any electrical parts of

the installation.

Note: A single socket is required for the operation of the suite.

Installation- Preparation

Unpack your new Suite (Fire- Pre-Installed) and if purchased the Flat Pack Plinth.

Note: DO NOT dispose of the packaging until you have checked and made sure all the parts and fixings listed on

P4, are present..

Once the Suite is unpacked the Cardboard Box inside the fire needs to be removed and the contents checked, as

listed on P4.

To do this, unscrew the 2 x Screws holding the 2 x Glass Brackets in place. There is 1 x Screw either side of the

fire. See Diagrams 2 & 3.

Note: The instructions are detailed for both 36” and 46” Suites- Please familiarise yourself with the model you

have purchased before proceeding further.

Diagram 2 Diagram 3

Diagram 1

Installation- Preparation Continued ……………..

200817

Once the 2 x Screws and 2 x Glass Brackets are removed the Glass can be angled forward (1) from the top of the

fire and lifted out of the channel at the base of the glass. (2) See diagram 4.

Note: Place the Glass, 2 x Glass Brackets and 2 x Screws in a safe place, as these will be required later.

Remove the Cardboard Box from inside the fire and depending on the model purchased, check the contents as

listed on P4.

Note: Before proceeding further ensure there is power to the Fire (Suite), and it is operating correctly. (Follow

the separate fire operating instructions).

The next step is to decide on the installation location and before starting the installation ensure that there is

enough space to install the Suite - See P3, for the product overall sizes.

Note: If the suite is planned to be Floor-Standing

(with the plinth positioned below the suite) the Wall

Mount Bracket must be positioned 380mm from the

top of a level plinth to the top of the Wall Mount

Bracket. Follow P7-9

Note: Alternatively, if the suite is planned to be

positioned as a wall hung model (no plinth) the Wall

Mount Bracket may be positioned at any desired

height on the wall. However, consider the distance

from the bottom edge of the Suite to the top of the

Wall Mount Bracket is 512mm. Follow P10-14

For installation as a Floor-Standing Suite proceed to P7.

For installation as a Wall Mounted Suite proceed to P10

Diagram 4

Installation- Floor-Standing –Suite

If the Plinth is not required, please proceed to P10.

200817

To begin the Floor-Standing Suite installation, lightly mark a vertical line in the centre of the installation location-

approximately 680mm up from the floor. See Diagram 5.

Locate the box with the Plinth components inside and follow the separate assembly instructions, boxed with the

Plinth.

Once assembled, trial fit the Plinth centrally in the installation location, and remove any obstructions, i.e. cut to

shape or remove skirting to allow the Plinth to butt up flush to the wall. See Diagram 6.

Note: Before proceeding further consider if the Plinth will require modifying to allow for the power cable to be

routed correctly to the socket.

Diagram 6

Diagram 5

Installation- Floor-Standing –Suite Continued……..

200817

Ensuring the Plinth is level and centrally positioned in the installation location, measure up 380mm from both

inside edges of plinth and using a straight edge lightly mark a horizontal line either side of the previously marked

centre line. See Diagram 7.

Locate the Wall Mount Bracket- (screwed to the rear of the fire). Measure and lightly mark the centre of the Wall

Mount Bracket and offer the top edge of the Wall Mount Bracket up to the previous drawn horizontal line, level

and mark the fixing positions in the bracket on the wall behind. See Diagram 8.

Once marked, drill the fixing positions. Depending on the wall medium, it may be necessary to plug the drilled holes.

See P17 ‘Important Note’.

Finally screw and secure the Wall Mount Bracket to the wall using suitable screws. See P17 ‘Important Note’.

See Diagram 9.

Diagram 7

Diagram 8 Diagram 9

Note: The Suite is a two adult person lift. A second person will be required to lift and support the pre-assembled

parts during installation.

Note: The power cable needs be routed to the rear of the Suite. Care must be taken not to crush or damage the

cable when positioning the Suite. Before proceeding further ensure the power cable is connected to a power

supply.

Installation- Floor-Standing –Suite Continued……..

200817

Tip- Before proceeding further extend the centreline approximately 75mm up from the top of Wall Mount

Bracket and lightly mark the centre of the top back edge of the surround. This will help when trying to line the

bracket up with the slots on the back of the fire in the next installation step. See Diagrams 10 & 11.

Lifting the Suite as described on P5, offer the suite back to the wall approx. 90mm above the top of the Wall Mount

Bracket and lower the Suite parallel with the wall into position. When lowering try to line up the central mark on the

wall and the top of the Suite, ensuring the ‘prongs’ on the Wall Mount Bracket engage with the slots on the back of

the fire. See Diagrams 12 & 13.

If necessary, repeat this step, until you are confident the Suite is fully engaged on the Wall Mount Bracket and if

required centralise on the installation location there will be some slight adjustment left and right.

The installation is now complete- The fuel bed can now be dressed and the logs positioned. See Diagrams 27-31,

P15.

Diagram 12 Diagram 13

Diagram 10 Diagram 11

Installation –Wall Mounted Suite

200817

Once the desired installation height has been determined, lightly mark the position of the bottom edge of the Suite

centrally on the on the wall.

Measure up a further 60mm from this position (This is so the line can’t been seen once the Suite is installed) and

lightly mark a vertical line in the centre of the installation location at a length of approximately 480mm.

See Diagram 15.

Note: Consider once installed the distance from the bottom edge of the Suite to the top of the Wall Mount

Bracket is 512mm. The top of the surround is approx. 71mm above this. See Diagram 14.

Diagram 15

Diagram 14

If the suite is planned to be positioned, as a Wall Mounted Suite the wall mount bracket may be positioned at any

desired height on the wall.

Otros manuales para Arteon Pryzm 10003SL

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Chimenea de interior de bemodern

bemodern

bemodern 2100 Manual de usuario

bemodern

bemodern ELSIE 960 Manual de usuario

bemodern

bemodern BROSELEY EVOLUTION Canterbury Remote Manual

bemodern

bemodern Beadnell Manual del propietario

bemodern

bemodern PRIZM MEDIAVUE Manual de programación

bemodern

bemodern Pryzm 750 Manual de usuario

bemodern

bemodern EVOLV GAS FIRES 520 Slimline Inset Guía del usuario

bemodern

bemodern 2668 Manual de usuario

bemodern

bemodern Arteon 4119 Manual de usuario

bemodern

bemodern HANSFORD GRANDE Manual de programación

bemodern

bemodern BM-081 2 Series Manual de usuario

bemodern

bemodern Pryzm 1000 Manual de usuario

bemodern

bemodern 580 Deluxe Inset Manual de usuario

bemodern

bemodern Arteon Pryzm 10003SL Manual de usuario

bemodern

bemodern Pryzm Volta 42 Guía

bemodern

bemodern Arteon Pryzm 10003SL Guía

bemodern

bemodern 800CF Manual de usuario

bemodern

bemodern BM-05XXX1 Manual de usuario

bemodern

bemodern EARDF16NG Guía del usuario

bemodern

bemodern Arteon Pryzm 10003SL Manual de programación

bemodern

bemodern 600CF Manual de usuario

bemodern

bemodern Pryzm 750 Guía

bemodern

bemodern 2599M Manual de usuario

bemodern

bemodern BM-10 Manual de usuario

Manuales populares de Chimenea de interior de otras marcas

Brigantia

Brigantia 35-DVRS31N-2 Manual del propietario

Nordpeis

Nordpeis Bergen Manual de usuario

Superior

Superior BCT2536TMN Manual de usuario

Quadra-Fire

Quadra-Fire 5100I-GD-B Manual de usuario

Renaissance

Renaissance RUMFORD 1000 Manual de usuario

Lacunza

Lacunza IV-800 Manual de usuario

Baxi

Baxi 940 Instrucciones de uso

Dru

Dru Maestro 60/2 Tall RCH Manual de usuario

Diamond Fireglass

Diamond Fireglass SS-O22 Manual de usuario

HearthStone

HearthStone Windsor Bay 8830 Manual de programación

Napoleon

Napoleon ASCENT B42 Manual de usuario

Enviro

Enviro E33GI Manual de usuario

Smeg

Smeg L30 FABE Instrucciones de montaje

KEDDY

KEDDY K700 Manual de usuario

Godin

Godin 3451 Manual de usuario

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manual de usuario

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manual de usuario

Desa

Desa CCFPDFT Manual de operación