bem wireless MOJO II Manual de usuario
II
2
Product Overview
In order to make sure you get the best possible results from your
new Speaker Mojo II, please thoroughly read and carefully follow
all instructions in this User’s Manual or on the product. Keep this
User’s Manual in a convenient location for future reference.
Package Contents:
Speaker Mojo II x 1
Power cradle x 1
Power adapter x 1
Micro USB charging cable x 1
Aux cable x 1
User’s Manual x 1
If any of the above contents were missing or damaged, please
visit bemwirelesss.com/support/ to obtain a replacement.
Please do not return to Club, please call 855-839-8616 if you have
any questions or issues with the Speaker Mojo II.
Compatibility
All devices enabled with Bluetooth technology, including iPhones,
iPads, iPods, smartphones, laptops, tablets and more.
Also compatible with any device that has a standard 3.5mm
earphone jack such as MP3 players, PSP, mobile phones, etc.
Meet the Speaker Mojo II
Before learning about your Speaker Mojo II, take a moment to
look it over and familiarize yourself with its features.
Important: Select Speaker mode prIor to turnIng on Speaker(S)
M
L R
15
3
Product Interface
1. Microphone
2. Volume +
3. Volume –
4. Play / Pause /Speak-
erphone
5. Power Cradle
6. On/ Off switch
7. Bluetooth©indicator
8. Aux in
9. Micro USB power port
10. Power indicator
Power Cradle
11. USB port
12. Power Indicator
13. Charging switch
14. Micro USB power port
Stereo Function
15. Stereo (L, M, R) Switch
Speaker Mojo II
Important: Select Speaker mode prIor to turnIng on Speaker(S)
4
Charging Modes
1. Direct Speaker Charge
Connect the standard USB end of the
supplied USB cable to a USB power source
(PC, USB power adapter…etc.). Connect
the Micro USB jack to the USB charging
port on the Speaker Mojo II. It will take
about 2 hours to fully charge the Speaker
Mojo II alone.
Charging Indicator Light Modes
Power indicator on Speaker Mojo II
• Red LED: Speaker Mojo II is charging;
• No LED: Battery is fully charged
• Note: When the battery is low, you will hear a tone signaling
you to charge the unit soon
2. Power Cradle Charge
The Power cradle is a backup battery pack
for Speaker Mojo II and your Bluetooth
device. Connect the standard USB end of the
supplied USB cable to a USB power source
(PC, USB power adapter…etc.). Connect the
Micro USB jack to the USB charging port on
the power cradle. The charging indicator will
light up while charging. It will take about 3 hours to fully charge
the power cradle.
Important: Select Speaker mode prIor to turnIng on Speaker(S)
5
Indicator on power cradle
• Red LED : Charging, it will go off when it is fully charged;
• Blue LED : power output is on.
3. Wireless Conductive Charging via Power Cradle
Connect the standard USB end of the
supplied USB cable to a USB power
source (PC, USB power adapter…
etc.). Connect the Micro USB jack
to the USB charging port on the
power cradle. The charging indicator
will light up while charging. If you
put Speaker Mojo II onto the power
cradle, it will charge them both at the
same time whether you connect the power to the Speaker Mojo
II or power cradle. It will take about 5 hours for charging them at
the same time. Once both are fully charged, the battery life of the
Speaker Mojo II can be doubled. This can be done by turning on
the power cradle, placing the Speaker Mojo II on the cradle and
turning it on while playing music.
Please note, the Speaker Mojo II LED charging indicator will not
light up when the speaker is charging on the Power Cradle
Charging Modes (Cont.)
Important: Select Speaker mode prIor to turnIng on Speaker(S)
6
4. Charging Other USB Enabled Devices via Power Cradle
The included Power Cradle can
also be used to charge other USB
enabled devices. Simply follow the
steps listed in number 2 to charge
up the Power Cradle. You can now
take the power cradle with you on
the go to charge various other smart
devices via USB. You can do so by
connecting the standard USB end
of a USB cable to the USB port in the back of the Power Cradle.
Then plug the other end into your smart device.
Slide the power switch to “on” to turn it on and begin charging
other smart devices. The blue indicator light will light up to signify
the unit is on.Slide the power switch to “off” to turn off the power
cradle. The blue indicator light will go out and your smart devices
will no longer charge via USB.
Speaker Selection (Mode)
Important: Before you go to turn on the Speaker Mojo II please
stop and read these instructions carefully.
The Speaker Mojo II can be played in a couple of different ways.
Mono mode will allow you to work with just one speaker or stereo
mode which allows you to pair up two speakers.
Charging Modes (Cont.)
Play Modes
Important: Select Speaker mode prIor to turnIng on Speaker(S)
7
Playing in Mono Mode: Make sure the
switch on the bottom of the speaker
is switched to “M” before turning on
the speaker
Playing in Stereo Mode: One
speaker must be switched to “L”
on the bottom and the other must
be switched to “R” before turning
them on.
Power on / Power off
Slide the power switch to “on” to
turn on the Speaker Mojo II. The
Bluetooth indicator will light up blue to signify the unit is on and
ready to be paired.
Slide the power switch to “off” to turn off the unit
and the Bluetooth indicator light will go out.
Play Modes (Cont.)
M
L R
M
L R
M
L R
M
L R
M
L R
M
L R
Important: Select Speaker mode prIor to turnIng on Speaker(S)
8
Single Speaker
• Bluetooth mode: Play an audio
signal from the connected
Bluetooth device. Before turning
the Speaker Mojo II on, turn the
speaker over so that the bottom
of the speaker is facing up. Locate
the stereo switch (L,M,R) on the speaker and make sure that
it is set to the “M” or mono setting.
• Now turn on the Speaker Mojo II. Once the Speaker Mojo II
has entered Bluetooth mode, the Bluetooth icon will light
up blue and the tone conrming that the unit is currently in
Bluetooth pairing mode will sound.
• Go to the Bluetooth settings on your smart device to nd
the device named “Mojo II”. A tone will sound to conrm the
device has paired successfully. Next time the Speaker Mojo II
and connected device will pair automatically.
Please note: Mojo II will not show up as an available device
unless you have set the stereo switch to “M”. Your device
must be within 40 feet of the speaker while in bluetooth
mode.
• Direct Connection Mode (Aux In): To play music via direct
connection simply insert the included Aux cable into the Aux
in port on the back of the Speaker. Direct connection mode is
not supported in Stereo Mode.
Play Modes (Cont.)
M
L R
M
L R
Important: Select Speaker mode prIor to turnIng on Speaker(S)
9
Play Modes (Cont.)
• Please Note: If an Aux cable is connected to the speaker it will
not play music from Bluetooth© connected devices.
Stereo Speaker Mode (Two Speakers)
• Bluetooth mode: The Speaker Mojo II has
the ability to be connected together with
another Speaker Mojo II to enter into stereo
speaker mode. To enter into stereo speaker
mode, begin by selecting either one of the
Speaker Mojo II speakers and slide the stereo
switch on the bottom of the speaker to “L”
which stands for left.
• Take the other speaker and slide the stereo
switch to “R” which stands for right. Now
turn on the speakers and they will auto pair
to each other within 10 seconds of being
turned on.
• Go to the Bluetooth settings on your smart
device to nd the device named “Mojo II”.
A tone will sound to conrm the device has
paired successfully. Next time the Speaker
Mojo II and connected device will pair
automatically.
M
L R
M
L R
M
L R
M
L R
Important: Select Speaker mode prIor to turnIng on Speaker(S)
10
• Note: If you are in Stereo Mode and the “R-speaker”
disconnects due to being too far apart, the music playing on
the “L-speaker” will pause. In stereo mode the speakers can
be no more than 20 feet apart from each other.Once you are
back in the above range of operation for the two speakers,
they will reconnect by themselves automatically .When paired
successfully again, there will be indication sound signaling a
reconnection, and the two speakers will begin playing music
within 3 seconds.
• Direct Connection Mode (Aux In): Direct connection via
Aux In is not supported in Stereo Speaker mode. Please
refer to the “Direct Connection Mode” section on Page 8 for
information on how to connect to a single speaker.
Play Modes (Cont.)
Important: Select Speaker mode prIor to turnIng on Speaker(S)
Tabla de contenidos
Otros manuales de Oradores de bem wireless
bem wireless
bem wireless bravo Manual de usuario
bem wireless
bem wireless Express Speaker Manual de usuario
bem wireless
bem wireless EXO-400 Manual de usuario
bem wireless
bem wireless mobile speaker Manual de usuario
bem wireless
bem wireless Sunrise Manual de usuario
bem wireless
bem wireless HL2331 Manual de usuario
bem wireless
bem wireless party block Manual de usuario
bem wireless
bem wireless SPEAKER MOJO Manual de usuario
bem wireless
bem wireless HL2508 Manual de usuario
bem wireless
bem wireless speaker trio Manual de usuario
