Beltone OR364-DVIR Manual de usuario

Instructions for use

Digital Behind-the-Ear hearing instrument

Non-wireless

OR364-DVIR/OR364-DVIRO/OR364-DVIRP/OR364-DVIRPO

OR65DI/OR65DIO

OR75VI/OR75DVI/OR75DVIO

OR378-DVI/OR378-DVIO/OR378-DVIP

OR85VI/OR85DVI

BO95DVI

2 3

Intended use

Generic air-conduction hearing instruments are wearable sound-amplifying devices intended to compen-

sate for impaired hearing. The fundamental operating principle of hearing instruments is to receive, amplify,

and transfer sound to the eardrum of a hearing impaired person.

A new Beltone hearing instrument

Congratulations on your choice of a Beltone hearing instrument!

Your hearing instrument is a very advanced device. Your hearing care practitioner has tuned it to your indi-

vidual needs. With a little devotion and patience you will become familiar with it.

This booklet is a short guide to assist you in getting acquainted with your hearing instrument. Read it care-

fully and use it as a guideline.

We wish you happiness and pleasant listening with your new instrument.

Beltone

This booklet & your instrument

In this booklet you will ﬁnd instructions for inserting and operating your new hearing instrument. You will

ﬁnd explanations for using your instrument and for daily handling. We will also give a few practical steps

towards better hearing.

Contents

Intended use 2

A new Beltone hearing instrument 2

This booklet & your instrument 2

Warning to hearing care professional 4

Important notice to prospective users 4

Your Hearing Instrument 5

(See page 50 for your selected model) 5

Switching on and off 13

Delayed Activation 14

Battery door lock 14

Low Battery Indication and changing batteries 15

Warnings 16

Inserting and removing the instrument 17

Removing your instrument 18

Inserting and removing the instrument 19

(ThinTube) 19

Recognising left and right instrument 20

Setting the volume 21

Program button 22

Telephone use 24

AutoPhone 25

T-program 27

Hearing through an induction loop 28

Audio input 29

Listen to radio or TV 30

Daily maintenance 31

Storing your instrument 32

Maintenance for BTE hearing instruments 32

Maintenance for the RIE hearing instruments 34

Changing wax guard for receiver tube 36

How to apply domes 37

General precautions 38

General warnings 39

Eight steps towards better hearing 40

Warning to hearing care practitioners 43

Troubleshooting guide 44

Troubleshooting guide 46

Technical speciﬁcations 48

International warranty, service and repair 49

Your selected model 50

Worldwide headquarters 56

4 5

Warning to hearing care professional

A hearing care professional should advise a prospective user to consult promptly with a licensed physi-

cian (preferably an ear specialist) before setting the instrument if the hearing care professional determines

through inquiry, actual observation, or review of any other available information concerning the prospective

user that the prospective user has any of the following conditions:

(i) visible congenital or traumatic deformity of the ear;

(ii) history of active drainage from the ear within the previous 90 days;

(iii) history of sudden or rapidly progressive hearing loss within the previous 90 days;

(iv) acute or chronic dizziness;

(v) unilateral hearing loss of sudden or recent onset within the previous 90 days;

(vi) audiometric air-bone gap equal to or greater than 15dB at 500 Hz (hertz), 1000 Hz, and 2000 Hz;

(vii) visible evidence of signiﬁcant cerumen accumulation or a foreign body in the ear canal;

(viii) pain or discomfort in the ear.

Important notice to prospective users

Good health practice requires that a person with a hearing loss has a medical evaluation by a licensed

physician (preferably a physician who specializes in diseases of the ear) before using a hearing aid such

as the Beltone Origin. Licensed physicians who specialize in diseases of the ear are often referred to as

otolaryngologists, otologists, or otorhinolaryngologists. The purpose of a medical evaluation is to assure

that all medically treatable conditions that may affect hearing are identiﬁed and treated before the hearing

instrument is used.

Your Hearing Instrument

(See page 50 for your selected model)

Push button

Volume Control

(optional)

64 RIE Hearing instrument

Receiver

Battery compartment

Model and serial number

Direct audio input

Battery door and left/right indicator

Receiver tube

Receiver Open Dome

6 7

ThinTube

Mini dome

Battery door

65 BTE Hearing Instrument With ThinTube

Model, Serial Number, Manufacturer

Microphone

Program button

Plastic tube

65 BTE Hearing Instrument

Earmold

Tone hook

Battery door

Model, Serial Number, Manufacturer

Microphone

Program button

8 9

ThinTube

Mini dome

Battery door

75 BTE Hearing Instrument with ThinTube

volume control (wheel or

toggle switch)

Model, Serial Number, Manufacturer

Microphone

Program button Plastic tube

75/85/95 BTE Hearing Instrument

Earmold

Tone hook

Battery door

Volume control (wheel or

toggle switch)

Model, Serial Number, Manufacturer

Microphone

Program button

10 11

ThinTube

Model

Direct audio input

Left/Right indicator

Left/Right indicator Battery lock (optional)

Battery lock (optional)

Serial number

Mini dome

78 BTE Hearing Instrument with ThinTube 78 BTE Hearing Instrument

Earmold

Volume control (optional)

Battery compartment &

On/Off switch

Battery compartment &

On/Off switch

Microphone

Programme button

12 13

RIE mould Sports lock

Receiver Tulip Dome Receiver Power Dome NP receiver tube HP receiver tube

Switching on and off

Your instrument is equipped with an on/off switch integrated into the

battery compartment.

When the battery compartment is fully closed, the instrument is turned

on.

To turn the instrument off, grasp the battery compartment door with

your ﬁngernail and gently pull downwards. The power will switch off at

the point where you can feel a small click.

• Switch your instrument off if you are not using it. This will increase the

battery life.

• At night, switch off your instrument and open the battery door com-

pletely. It allows moisture in your instrument to evaporate and will increase the instrument’s life span.

After switching on the device, the volume will be as set by your hearing care practitioner.

Your instrument has a push button to switch programs. If you close the battery door your instrument will

always start in program number 1. Read more on this subject in the Program Button section.

switch off the instrument

14 15

Delayed Activation

Your hearing care professional may have activated the Delayed Activation function in your hearing instru-

ment. The Delayed Activation function delays the turn-on time by 10 seconds after closing the battery door.

This is indicated by beeps in the receiver at one second intervals when the battery door is closed, meaning

that 10 beeps will be heard before the hearing instrument is activated.

If you wish, this function can be deactivated by your hearing care professional.

Battery door lock

Your hearing care professional can install a Left/Right side indicator (Blue=Left, Red=Right), which can be

used to lock the battery door. Once locked, the instrument can only be turned off once the instrument is

unlocked.

To lock the battery door:

1. Close the battery door

2. Using the battery door locking tool, slide the color marker to the right.

To unlock the battery door:

Slide the color marker to the left.

Unlock Lock

Low Battery Indication and changing batteries

Low battery indication

Your hearing care professional can set your hearing instrument to give an

acoustical indication when the battery is reaching its end of life. The hear-

ing instrument will reduce ampliﬁcation and emit a melody if battery power

gets too low. This signal will recur every 5 minutes for OR64/65/75/78/85

models, and every 15 minutes for BO95 model, until the hearing instru-

ment automatically switches off. It is recommended that you keep spare

batteries on hand.

Changing batteries

Open the battery compartment completely by using your ﬁngernail. Use

the magnetic end of the cleaning brush for easy battery removal and in-

sertion.

When replacing the battery, always use new Zinc-Air batteries that have a

minimum remaining shelf-life of 1 year.

The 64 and 65 models uses a size 312 battery.

The 75, 78 and 85 models use a size 13 battery.

The 95 model uses a size 675 battery.

open battery door completely

exchange battery

16 17

Warnings i

Batteries contain dangerous substances and should be disposed of carefully in the interest of your safety

and for the environment.

• If device is broken, do not use

• Keep batteries away from children and mentally challenged persons.

• Do not place batteries in your mouth. Consult a physician immediately if a battery has been swallowed,

as they can be harmful to your health.

• Do not attempt to recharge batteries (Zinc Air) which are not speciﬁcally designated rechargeable, as

they may leak or explode.

• Do not burn the batteries, as they could explode.

• Replace spent batteries and do not leave them in the instrument for a prolonged period, to prevent

leakage.

• Used batteries are harmful to the environment. Please dispose of them according to local regulations or

return them to your hearing care practitioner.

• Remove the batteries to prevent leakage when the hearing instruments are not in use for an extended

period of time.

• Whenever the hearing instruments are not in use, remember to turn them off to avoid unnecessary bat-

tery consumption.

Inserting and removing the instrument

(standard earmould)

Inserting the instrument

• With the battery door opened in the off position, take the earmould bet-

ween thumb and index ﬁnger and position its ‘point’ in your ear canal.

Now, slide the earmould all the way into your ear with a gentle, twisting

movement.

Insertion can be easier if you gently pull your auricle backwards with

your other hand.

• Turn the top-part of the earmould gently backwards and forwards so

that it ﬁts behind the fold of skin above your ear canal.

• Place the hearing instrument behind your ear. Move the earmould up

and down and press gently to ensure it is positioned correctly in the ear.

Opening and closing your mouth can ease insertion. You will feel when

the earmould is positioned correctly.

• When correctly positioned, switch on your instrument by closing the bat-

tery door.

• You can also insert the hearing instrument while in the on position. Howe-

ver, doing this might result in some feedback (whistling).

18 19

Removing your instrument

• Switch off the instrument by shifting the battery door to the ‘off’ position.

• Lift the hearing instrument from behind the ear. For a moment, let it hang beside your ear.

• Using your thumb and index ﬁnger, gently pull the earmould not the instrument or the tubing) loose from

the ear.

• Remove the earmould completely by gently twisting it.

Inserting and removing the instrument

(ThinTube)

Inserting the instrument

• Hang the instrument over the top of the ear.

• Grasp the sound tube where it bends. The dome should be placed far

enough into the ear that the sound tube lies ﬂush with your head. When

the dome is placed appropriately, you should not see the sound tube

sticking out when you look directly into a mirror.

• If the device whistles, the most likely reason is that the dome is not pla-

ced correctly in the ear canal. Other reasons can be buildup of earwax

in the ear canal, or that the sound tube connection to the instrument

has become loose, in which case the sound tube must be changed. It

is also possible that the instrument settings are not optimal. If you have

ruled out other reasons for the instrument squealing, it is recommen-

ded to contact your hearing care professional.

iNever attempt to modify the shape of the hearing instrument, ear-

moulds, or tubing yourself.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Audífono de Beltone

Beltone

Beltone Change BTE Manual de usuario

Beltone

Beltone Rely RLY4CIC-W-LP Manual de usuario

Beltone

Beltone Imagine IMG1786-DWC Manual de usuario

Beltone

Beltone Imagine IMG17CIC-LP Manual de usuario

Beltone

Beltone myPAL Micro Manual de usuario

Beltone

Beltone X26SY312 Manual de usuario

Beltone

Beltone AMAZE Manual de usuario

Beltone

Beltone CIC Manual de usuario

Beltone

Beltone CHG75 Manual de usuario

Beltone

Beltone AMAZE Manual de usuario

Beltone

Beltone LND17IIC Manual de usuario

Beltone

Beltone DELHI 60 Manual de usuario

Beltone

Beltone IDT62D Manual de usuario

Beltone

Beltone IDT35D HPGIDT45/45 HPG and IDT45D/45D HPG Manual de usuario

Beltone

Beltone LND1776-DW Manual de usuario

Beltone

Beltone RLY464-DRW Manual de usuario

Beltone

Beltone TST1764-DRW Manual de usuario

Beltone

Beltone Rely RLY463-DRWC Manual de usuario

Beltone

Beltone Celebrate XC Manual de usuario

Beltone

Beltone Rely 64 Manual de usuario

Beltone

Beltone IIC serie Manual de usuario

Beltone

Beltone Rely 76 Manual de usuario

Beltone

Beltone HearPlus Legend Manual de usuario

Beltone

Beltone Amaze BER13 Manual de usuario

Manuales populares de Audífono de otras marcas

Sonic

Sonic Bliss miniBTE Manual de usuario

Lexie

Lexie B1 Manual de lista de piezas

Widex

Widex FM+DEX Manual de usuario

Siemens

Siemens Triano Manual de usuario

Camplicomms

Camplicomms HC-200 Manual de usuario

Widex

Widex SUPER 220 S2-VSD Manual de usuario

Phonak

Phonak Q90 Manual de usuario

Williams Sound

Williams Sound SoundPlus WIR 237 Guía

Oticon Medical

Oticon Medical Ponto SoundConnector Manual de usuario

Siemens

Siemens Life micon Manual de usuario

Starkey

Starkey Destiny Manual de usuario

Audicus

Audicus The Icon Manual de usuario

Advanced Bionics

Advanced Bionics Slim HP Standard Manual de usuario

Widex

Widex DREAM440 THE DREAM SERIES Manual de usuario

Phonak

Phonak myPilot Manual de usuario

NIKEN

NIKEN NK-401 Manual de usuario

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manual de usuario

Sonetik

Sonetik GOHEAR Manual de usuario