Belkin WeMo F7C027 Manual de usuario
USER GUIDE
Wemo® Wi-Fi Smart Light Switch, F7C030
light indicators
The Wemo® Wi-Fi Smart Light Switch, F7C030 has several indicator lights that indicate the
device's state. Below is a list of the light behaviors and the corresponding activity they represent.
Indicator
Light
Icon
Indicator
Activity
Power
indicator
ON
The Wemo Light Switch is ON.
OFF
The Wemo Light Switch is OFF.
Night time
backlight
ON
The Wemo Light Switch is ON.
Wi-Fi
indicator
Green and
blinking
The Wemo Light Switch is starting up,
connecting or undergoing firmware
update.
Green and solid
then turns OFF
The Wemo Light Switch has
established a stable connection.
Orange and
blinking
The Wemo Light Switch is not
connected to the Wi-Fi.
NOTE: The Wi-Fi indicator light is only visible during setup.
Meet the Wemo® Wi-Fi Smart Light Switch,
F7C030
The Wemo® Wi-Fi Smart Light Switch,F7C030 is an alternative for your simple wall light switch that
allows you to view the status and control the light anywhere in your home.
Key Features
The Wemo Light Switch connects to your Wi-Fi, allowing your device to connect to it
through the Wemo App. It can connect seamlessly over Wi-Fi, 3G or 4G.
You can easily set the turn ON or OFF times manually or enter your city name and have
lights to turn ON at sunrise then OFF at sunset.
The Wemo Light Switch comes with an elegant clip-on face plate that hides all screws
giving it a modern look and it has a back light to make it easy to find at night.
Compatible with any smartphone or tablet running Android™ 4.4 or higher or iOS 9 or
higher.
HardwareFeatures
A. Wi-Fi Indicator - This indicator changes alternatively in color between green and orange and is
only visible during setup.
B. Power Indicator - This indicator lights up if the Wemo Light Switch is ON.
C. Night Light - This indicator lights up only when the room is dark that makes the Wemo Light
Switch easy to find.
D. Reset Button - This is also known as the Wi-Fi Reset button that is dedicated for resetting the Wi-
Fi settings of your Wemo Light Switch. This is located right below the Night Light beside the Power
Restart button.
E. Restart Button - This is alsoknown as the Power Restart button that is dedicated to power restart
your Wemo Light Switch without losing any Wi-Fi settings. This is located right below the Night Light
beside the Wi-Fi Reset button.
F. Clip-on Face Plate - This hides all screws, giving a modern look to the Wemo Light Switch.
NOTE: The MAC address of the Wemo Light Switch can be found underneath if you remove the face
plate.
G. Easy ON / OFF - Push anywhere to toggle ON and OFF.
Resetting or restarting your Wemo® Wi-Fi Smart Light Switch,F7C030 is easy with its
dedicated Reset and Restart buttons.
Restart if:
The Wemo Light Switch is not detected by the Wemo App.
The Wemo Light Switch is blinking orange after a firmware update.
The Wemo Light Switch has become unresponsive to both the app and manual controls.
Reset if:
You recently changed your wireless router or your Wi-Fi name or password.
You want to erase any stored settings.
QUICK TIP: On the Wemo Light Switch faceplate, the Reset button is also known as the Wi-Fi
Reset button, while the Restart button as the Power Restart button.
How to restart your Wemo Light Switch
To restart the Wemo Light Switch, press the Restart button for 1 second and then release. The Wi-
Fi Indicator light will begin to blink green to show it is restarting.
QUICK TIP: If the Wemo Light Switch is not responding to the Restart button, turn OFF the power
of the Wemo Light Switch by turning the circuit breaker OFF and then turning it back ON.
How to reset your Wemo Light Switch
Resetting using the Wemo App
Resetting using the Reset button
Resetting using the Wemo App
Step 1: Launch the App.
Step 2: Tap .
Step 3: Tap WeMo Light Switch.
Step 4: Tap Reset Options.
Step 5: Tap Reset Name, Rules & Data.
Resetting using the Reset button
IMPORTANT: This process will delete all previous settings done in the Wemo App and reset your
Wemo Light Switch to factory default settings. You will need to set up the Wemo Light Switch with
the Wemo App again.
Step 1: Press the Restart button for 1 second and then release. The Wi-Fi Indicator
light will begin to blink green to show it is restarting.
QUICK TIP: If the Wemo Light Switch is not responding to the Restart button, turn OFF
the power of the Wemo Light Switch by turning the circuit breaker OFF and then turning
back ON.
Step 2: Immediately press and hold the Reset button for 5 seconds. The Wemo Light
Switch Wi-Fi icon will blink orange rapidly, indicating a successful restore.
The Wemo Light Switch will take about 90 seconds to perform the restore. When ready, the Wi-Fi
Indicator light will begin to alternate between green and orange to show it is ready to be set up. For
setup instructions, click here.
Installation of the Wemo Light Switch to the electrical line
If you’re familiar and comfortable with basic electrical work, it only takes a few minutes to set up your Wemo
Light Switch. Otherwise, do not try and do it yourself, please call a professional electrician.
Electrical Installation Requirements
A Neutral wire (requires all three AC electrical connections at the wall switch)
A single pole light switch (not compatible with lights controlled by more than one switch)
The light switch box must be 2inches deep
IMPORTANT: The Wemo Light Switch is not designed to work with metal faceplates because they
interfere with the Wi-Fi signal. It is recommended to use the light switch for residential and dry indoor
locations only.
Once these electrical requirements are complete, proceed with the electrical installation instructions below.
Step 1: Shut OFF the power at the circuit breaker for the switch you are replacing. You
may need to shut OFF more than one circuit breaker/switch to make sure the switch you're
working on is powered OFF.
IMPORTANT: USE A NON-CONTACT VOLTAGE DETECTOR OR FLIP YOUR
LIGHT SWITCH A FEW TIMES TO MAKE SURE THAT THE POWER IS OFF.
Step 2: Unscrew and disconnect the wires from the old switch using a screw driver.
Step 3: Identify the wires on your Wemo Light Switch.
Switch (Live/Load) wires - On this light switch, the Switch wires are the two
black wires. Every light switch will have both of these wires. But they could be
either red or black in color.
Neutral wire - The Wemo Light Switch requires this wire, but isn't always present
in your electrical wiring at home. If present, the neutral wire is normally found
within the wall box with a wire nut on top of it.
Ground wire - If present, it should be plugged into the top of the light switch
here. It's normally green or copper in color. Don't worry if you can't find the
ground wire, Wemo Light Switch doesn't require one.
WARNING! THE FOLLOWING WIRING SCENARIOS MAY BE DANGEROUS
OR ILLEGAL.
NOTE: For more details, see Wiring your Wemo® Wi-Fi Smart Light Switch, F7C030
Step 4: Install the Wemo Light Switch. Connect each of the two black wires from the
Wemo Light Switch to the available Switch (Live/Load) wires. In case you found more
than one wire, just place them into the wire nut.
NOTE: The wire nut is the cap-like object connecting the wires.
Step 5: If you have a Ground wire (optional), disconnect it from the old switch and
connect it to the green wire on the Wemo Light Switch.
Tabla de contenidos
Otros manuales de Cambiar de Belkin
Belkin
Belkin OmniView F1DP101Mea Manual de usuario
Belkin
Belkin F5D5130-F1 Manual de usuario
Belkin
Belkin Switch2 DVI-D Manual de usuario
Belkin
Belkin F1DS102U - OmniView SOHO Series 2 Port KVM... Manual de usuario
Belkin
Belkin F5U413 Manual de usuario
Belkin
Belkin OmniView F1DL102P Manual de usuario
Belkin
Belkin OmniView F1DK102P Manual de usuario
Belkin
Belkin F1DN102MOD-HH-4 Manual de usuario
Belkin
Belkin F5D5131-16 - 10/100 Switch Manual de usuario
Belkin
Belkin BITRONICS P72655 Manual de usuario
Belkin
Belkin F1DN204MOD-PP-4 Manual de usuario
Belkin
Belkin F1DF102P Manual de usuario
Belkin
Belkin SOHO F1DS10XLea Manual de usuario
Belkin
Belkin OmniView F1DD102Lea Manual de usuario
Belkin
Belkin OmniView F1DD102U Manual de usuario
Belkin
Belkin USB Desk Hub Manual de usuario
Belkin
Belkin OmniView Dual-User PRO3 Manual de usuario
Belkin
Belkin F1DG102W - Flip Wireless KVM Manual de usuario
Belkin
Belkin OMNIVIEW F1DA104PEA Manual de usuario
Belkin
Belkin OmniView Professional Series Manual de usuario
