Belkin F1D201u Manual de usuario
Start Here
Quick Installation Guide F1D201u
2-Port Reverse KVM Switch
English
Français
DEutsch
nEDErlanDs
Español
italiano
F1D201u_8820ea00071.indb 1 15/10/2009 09:00:14
Package Contents
Introduction EN 1
Introduction
This booklet will guide you through the basic steps needed to install the
2-Port Reverse KVM Switch.
2-Port Reverse
KVM Switch Quick Installation
Guide
Specifications
Part No. F1D201u
Material Plastic enclosure
Net Weight 30.6 lbs. (13.9kg.)
Unit Dimensions 2.95 (W) x 2.76 (D) x 1.23 (H) in.
(75 x 70 x 31.3mm)
Max. Video Resolution 1600x1200
Keyboard Connection PS/2
Mouse Connection PS/2
Monitor Connection HDDB15 (VGA)
Warranty 2 years
F1D201u_8820ea00071.indb 2 15/10/2009 09:00:14
Specifications EN 2
Specifications
Part No. F1D201u
Material Plastic enclosure
Net Weight 30.6 lbs. (13.9kg.)
Unit Dimensions 2.95 (W) x 2.76 (D) x 1.23 (H) in.
(75 x 70 x 31.3mm)
Max. Video Resolution 1600x1200
Keyboard Connection PS/2
Mouse Connection PS/2
Monitor Connection HDDB15 (VGA)
Warranty 2 years
F1D201u_8820ea00071.indb 3 15/10/2009 09:00:14
Installation EN 3
Installation
Step 1 Power off your computer.
Step 2 Using the included KVM cable, connect the male VGA end to the VGA port on
your computer.
Step 3 Connect the PS/2 ends of the included KVM cable to the keyboard and mouse
ports, paying particular attention to which cable connects to which port. They
are not interchangeable.
Step 4 Connect your monitors to the back of the Reverse KVM Switch.
Step 5 Connect your keyboards and mice to the console ports to the back of the
Reverse KVM Switch.
Step 6 Turn on the connected monitors.
Step 7 Turn on the connected computer. The display LED will turn on User 1 or User 2,
depending on the last lighted position of the LEDs.
You are now ready to use your 2-Port Reverse KVM Switch.
F1D201u_8820ea00071.indb 4 15/10/2009 09:00:14
Step 1 Power off your computer.
Step 2 Using the included KVM cable, connect the male VGA end to the VGA port on
your computer.
Step 3 Connect the PS/2 ends of the included KVM cable to the keyboard and mouse
ports, paying particular attention to which cable connects to which port. They
are not interchangeable.
Step 4 Connect your monitors to the back of the Reverse KVM Switch.
Installation EN 4
Step 5 Connect your keyboards and mice to the console ports to the back of the
Reverse KVM Switch.
Step 6 Turn on the connected monitors.
Step 7 Turn on the connected computer. The display LED will turn on User 1 or User 2,
depending on the last lighted position of the LEDs.
You are now ready to use your 2-Port Reverse KVM Switch.
F1D201u_8820ea00071.indb 5 15/10/2009 09:00:16
Using your 2-Port Reverse KVM Switch EN 5
Using your 2-Port
Reverse KVM Switch
Switch Between Two Users
Press “Ctrl” twice (within three seconds) to switch between users.
Switch the Beeping Sound ON/OFF
Press the right “Shift” twice (within three seconds) to switch the beeping sound ON
or OFF.
Hot-Key Setting Mode
1To enter the hot-key setting mode, press “Scroll-Lock” twice (within three seconds).
2The LED lights under “Num Lock”, “Caps Lock”, and “Scroll Lock” at the top right
corner of the keyboard will be used as an indicator for the time-out setting.
4Single Screen Display:
To turn on or off the display on the other console, press “L” while in the hot-key
setting mode.
5Release control to the other user:
While in the hot-key mode, press “SPACE” to give the usage to the other user.
6Exit the hot-key setting mode:
Press “ESC” to exit the hot-key setting mode.
Time-Out Period NUM LOCK CAPS LOCK SCROLL LOCK
30 sec. OFF OFF ON
1 min. ON OFF OFF
3 min. ON OFF ON
5 min. OFF ON OFF
10 min. OFF ON ON
20 min. ON ON OFF
3Adjusting time-out setting:
a. Under the hot-key settings, press “-” to decrease the time-out period.
b. Under the hot-key settings, press “+” to increase the time-out period.
c. Time-out setting table.
F1D201u_8820ea00071.indb 6 15/10/2009 09:00:16
Switch Between Two Users
Press “Ctrl” twice (within three seconds) to switch between users.
Switch the Beeping Sound ON/OFF
Press the right “Shift” twice (within three seconds) to switch the beeping sound ON
or OFF.
1To enter the hot-key setting mode, press “Scroll-Lock” twice (within three seconds).
2The LED lights under “Num Lock”, “Caps Lock”, and “Scroll Lock” at the top right
corner of the keyboard will be used as an indicator for the time-out setting.
Hot-Key Setting Mode EN 6
4Single Screen Display:
To turn on or off the display on the other console, press “L” while in the hot-key
setting mode.
5Release control to the other user:
While in the hot-key mode, press “SPACE” to give the usage to the other user.
6Exit the hot-key setting mode:
Press “ESC” to exit the hot-key setting mode.
Time-Out Period NUM LOCK CAPS LOCK SCROLL LOCK
30 sec. OFF OFF ON
1 min. ON OFF OFF
3 min. ON OFF ON
5 min. OFF ON OFF
10 min. OFF ON ON
20 min. ON ON OFF
3Adjusting time-out setting:
a. Under the hot-key settings, press “-” to decrease the time-out period.
b. Under the hot-key settings, press “+” to increase the time-out period.
c. Time-out setting table.
F1D201u_8820ea00071.indb 7 15/10/2009 09:00:16
© 2009 Belkin International, Inc. All rights reserved. All trade names are registered
trademarks of respective manufacturers listed.
8820ea00071
2-Port Reverse KVM Switch
F1D201u_8820ea00071.indb 8 15/10/2009 09:00:16
Commencez ici
Guide d'installation rapide F1D201u
Switch KVM inversé 2 ports
English
Français
DEutsch
nEDErlanDs
Español
italiano
F1D201u_8820ea00071.indb 25 15/10/2009 09:00:21
Contenu du coffret
Introduction FR 1
Introduction
Ce document vous guidera à travers les étapes élémentaires nécessaires à
l'installation du switch KVM inversé 2 ports.
Switch inversé 2 ports
Switch KVM Guide d'installation
rapide
Spécifications
Référence F1D201u
Matériau Boîtier plastique
Poids net 13,9 kg
Unit Dimensions 75 x 70 x 31,3 mm
Résolution vidéo max. 1600 x 1200
Connectique clavier PS/2
Connectique souris PS/2
Connectique moniteur HDDB15 (VGA)
Garantie 2 ans
F1D201u_8820ea00071.indb 26 15/10/2009 09:00:21
Tabla de contenidos
Idiomas:
Otros manuales de Cambiar de Belkin
Belkin
Belkin F5U237 Manual de usuario
Belkin
Belkin OmniView F1DJ102P-B Manual de usuario
Belkin
Belkin F1DG102U - Flip USB With Audio KVM Manual de usuario
Belkin
Belkin F5U234 Manual de usuario
Belkin
Belkin F5U303 Manual de usuario
Belkin
Belkin OmniView F1DK102P Manual de usuario
Belkin
Belkin OmniView F1DE108C Manual de usuario
Belkin
Belkin OmniView F1DD102Lea Manual de usuario
Belkin
Belkin F5L009EA Manual de usuario
Belkin
Belkin F1DN104F-3 Manual de usuario
Belkin
Belkin 16-Port Gigabit Switch Manual de usuario
Belkin
Belkin OmniView F1DD102U Manual de usuario
Belkin
Belkin OmniView Dual-User PRO3 Manual de usuario
Belkin
Belkin OmniView F1DG102W Manual de usuario
Belkin
Belkin OmniView F1DS102J Manual de usuario
Belkin
Belkin OmniView F1D104 Manual de usuario
Belkin
Belkin OMNIVIEW P72115 Manual de usuario
Belkin
Belkin ExpressBus F5U001 Manual de usuario
Belkin
Belkin OmniView F1DA104T Manual de usuario
Belkin
Belkin F1D201 Manual de usuario
