Belkin F5U003-MAC Manual de usuario

USB Serial Adapter

for Macintosh

Installation Manual

F5UO03-MAC

P72764

Step 1: Insert the CD into your CD-ROM drive.

Place the CD into your CD-ROM drive. When the CD icon appears on your

desktop, named Belkin USB to Serial, double click on the icon to display it's

contents.

Step 2. Installer

2.1. Double click on the icon named Belkin USB Serial Installer.

2.2. On the Belkin USB Serial Adapter screen click on Continue.

2.3. Please read the next screen regarding the software license agreement.

If you agree to the terms of the license agreement, click Continue.

2.4. The screen that follows will now prompt you to commence

installation. Click on Install.

2.5. A message will appear warning you to restart your computer after

installation. Click Continue.

2.6. Click Restart to complete the installation. This will restart your

computer.

The Belkin USB Serial Installer application will place 4 items on the

Extensions Folder (located in your hard drive's System Folder), namely: 1)

Belkin USB Serial driver 2) Belkin USB Serial Shim

3) Belkin USB Serial Hal 4) Serial Shim Lib.

Note: The installer will not run unless you have the Mac OS USB version

1.0.1 (or later) drivers installed.

If you have an iMac computer running Mac OS 8.1, the Mac' OS USB drivers

version 1.0.1 can be installed by installing the iMac Update 1.0. This update

can be downloaded from Apple's web site at www.apple.com.

If you have an iMac or a "blue and white" G3 running Mac OS 8.5\8.6, the Mac

OS USB drivers version 1.0.1 (or later) is already installed. You do not need to

install any further software.

Step 3. Connect the adapter to your USB port.

After restarting the computer, attach the Belkin USB Serial Adapter for

Macintosh to your Macintosh computer by connecting the adapter and the USB

device cable (Part # F3Ul33-06) to any built-in USB port on your Macintosh

computer or any USB hub. It is not necessary to turn off your Mac when

attaching the Belkin USB Serial Adapter.

Step 4. Installation Complete!

Your Belkin USB Serial Adapter for Macintosh" is now ready for use.

Special Instructions for users using Mac OS 8.1 and 8.5.

For Mac 8.6 users you do not need to do the above instructions.

Mac OS 8.6 has advanced USB support, it automatically detects

and installs the port emulation needed by your device. After the

installation of the Belkin USB Serial Adapter driver, just connect

the USB Serial Adapter to the computer, then connect a Serial

device to the USB Serial Adapter and you are ready to use it.

After installing the USB Serial Adapter driver and restarting the computer, you

can connect the USB Serial Adapter. First connect the USB Serial Adapter to the

computer, then connect a Serial device to the USB Serial Adapter. The Serial

device is now ready for use.

If you are using Mac OS 8.1 or 8.5, you will need to specify the port that your

device requires either Printer Port or Modem Port. Some serial devices require

Printer Part Emulation to work (some examples are HP DeskWriter Printers

and Kodak and Epson Cameras). These devices require Printer Port Emulation to

work because their drivers can only recognize the Macintosh computer printer

port. For these devices the following connection procedure should be followed:

1. Hold down the "Option" key on the keyboard while connecting the USB

Serial Adapter to the Mac/iMac computer.

2. After the USB Serial Adapter for Macintosh is connected, then release

the "Option" key.

3. Connect the printer, camera or serial device to the USB Serial Adapter.

4. Run the printer or serial device software and the devices should

begin working.

5. In some cases, after restarting the computer, the printer or camera may

disconnect or stop working. To reconnect, repeat steps 1 through 4.

Note: If you do not know whether your device requires Printer Port Emulation,

simply connect your serial device normally after the USB Serial Adapter driver

installation. If it does not work initially, it is possible that the serial device

requires Printer Port Emulation. If so, follow steps

1 through 4 listed above.

Belkin Printer Patcher

This version of the driver includes the Belkin™ Printer Patcher that patches certain printer

drivers to make them compatible with the Belkin® USB Serial Adapter. These

printer drivers are the HP DeskWriter 600 Series, HP DeskJet 800 Series, and

Apple Color StyleWriter 4000. These patches are required in order to let these

printers operate with the USB Serial device.

If you are using the HP Deskwriter 600 Series, HP DeskJet 800 Series, or Apple

Color StyleWriter 4000, do the following: (Note: For all other serial devices, please

refer to the User Guide for Installation.)

1. Double-click on the Hard Drive icon on the Desktop to open it.

2. Double-click on the Belkin® Printer Patcher located in the root directory.

3. Click on Patch from the menu bar, and then select Patch Another Printer Driver.

4. Select the Printer driver from the list, and then click on the Choose button.

5. A dialog box ‘Modification was successful’ will appear. Click OK.

6. The Belkin® Printer Patch installation is now complete.

7. You can now start printing.

Note: It is recommended that you upgrade your operating system to Mac OS 8.6 as

it has advanced USB support.

1. Double click the Hard Drive Icon on your desktop

2. Double click the System Folder

3. Double click the Extensions folder

4. Look for the following files listed below then drag to the Trash:

a) Belkin USB Serial Driver

b) Belkin USB Serial Shim

c) Belkin USB Serial Hal

d) Serial Shim Lib

5. The Belkin USB Serial Adapter is removed, restart your computer.

Known Issues

Palm HotSync: The iMac will pause for a minute during HotSync. The

manufacturer has identified this problem. An updated driver is available

for download at www.paimpilot.com.

Zoom Modem: Zoom Modem has newer modem scripts on their web site. If

the printer port emulation is enabled, Apple's Control will not list the adapter

because Apple's Open Transport Networking does not support dial-up Internet

connections via the printer port. Note that modem cables used with the adapter

must support the DCD (carrier detect) signal on it's own pin. The Belkin

MiniDIN 8 to DB9 adapter, (Part # F31661-06INCH) works with the

appropriate Mac Modem cable.

Kodak DC-210: While transferring the picture you may get an error “Picture

transfer Application has encountered the error - SDK: Error communicating

with the camera” while processing picture “DC91453.FPX”. Just select “Retry

“ to resume picture transfer. Transferring a FlashFix image using the Kodak

Picture transfer application can often lead to a message about losing

communication with the camera.

Note: We are constantly adding support to serial devices, especially printers.

Please visit our web site at www.belkin.com for updated listing of compatible

devices and for any future updates to our current driver.

Dial-up/ ISDN Modems

All Brands

Ricochet Wireless Modem

Nikon CoolPix

Olympus

Sanyo

Toshiba

Fujifilm

Printers

Apple Style Writer I

Apple Style Writer II

Apple StyleWriter 1200

Apple StyleWriter 4100

Apple StyleWriter 4500

Epson 300 series

Epson 500 series

HP DeskJet 850 HP DeskJet 855Cse

HP DeskJet 855C HP DeskJet 870C

HP DeskJet 870Cse HP DeskJet 870Cxi

HP DeskWriter HP DeskWriter 510

HP DeskWriter 520 HP DeskWriter 540

HP DeskWriter 550C HP DeskWriter 560C

HP DeskWriter 600 HP DeskWriter 660C

HP DeskWriter 680C HP DeskWriter 690

PDA Devices

Palm V

Palm III

Palm Pilot

Newton

Psion

Digital Cameras

AGFA

Apple Quicktake

Epson

Kodak

Leica

Graphic Tablets

Wacom lntous (serial)

Wacom Artz 11 (serial)

CE Declaration of Conformity

We, Belkin Components, declare under our sole responsibility that the

Belkin Components F5UO03-MAC

to which this declaration relates, is in conformity with General

Emissions Standard EN50081 -1 and with Generic Immunity

Standard EN50082-1 1992.

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Belkin Components, of 501 West Walnut Street, Compton CA

90220, declare under-our sole responsibility that the product:

Belkin Components F5UO03-MAC

to which this declaration relates:

Complies with Partl5 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Belkin Components

501 West Walnut

Compton - CA - 90220-5221

Phone 800.2BELKIN (223.5546)

310.898.1100

Fax 310.898.1111

www.belkin.com

usb.belkin.com

Belkin Components Ltd.

13 Gatelodge Close

Round Spinney - Northampton - NN3 8RX

Phone +44(0)1604678300

Fax +44(0)1604790658

Belkin Printer Patcher

This version of the driver includes the Belkin™ Printer Patcher that patches certain printer

drivers to make them compatible with the Belkin® USB Serial Adapter. These

printer drivers are the HP DeskWriter 600 Series, HP DeskJet 800 Series, and

Apple Color StyleWriter 4000. These patches are required in order to let these

printers operate with the USB Serial device.

If you are using the HP Deskwriter 600 Series, HP DeskJet 800 Series, or Apple

Color StyleWriter 4000, do the following: (Note: For all other serial devices, please

refer to the User Guide for Installation.)

1. Double-click on the Hard Drive icon on the Desktop to open it.

2. Double-click on the Belkin® Printer Patcher located in the root directory.

3. Click on Patch from the menu bar, and then select Patch Another Printer Driver.

4. Select the Printer driver from the list, and then click on the Choose button.

5. A dialog box ‘Modification was successful’ will appear. Click OK.

6. The Belkin® Printer Patch installation is now complete.

7. You can now start printing.

Note: It is recommended that you upgrade your operating system to Mac OS 8.6 as

it has advanced USB support.

Tabla de contenidos

Otros manuales de Adaptador de Belkin

Belkin

Belkin F5U122-PC Manual de usuario

Belkin

Belkin BLUETOOTH WITH XP SERVICE PACK2 Guía rápida

Belkin

Belkin Dual-Band Wireless A+G USB Network Adapter... Manual de usuario

Belkin

Belkin F6D4050 Manual de usuario

Belkin

Belkin F8T013UK Manual de usuario

Belkin

Belkin F8T016 Manual de usuario

Belkin

Belkin F5U109 Manual de usuario

Belkin

Belkin N600 DB Manual de usuario

Belkin

Belkin F5U004 Manual de usuario

Belkin

Belkin Bluetooth USB Adapter F8T012 Manual de usuario

Belkin

Belkin G+MIMO Manual de usuario

Belkin

Belkin F5D8053E Manual de usuario

Belkin

Belkin USB Wireless Adapter Manual de usuario

Belkin

Belkin F5D6051 Manual de usuario

Belkin

Belkin MIRACAST VIDEO ADAPTER Manual de usuario

Belkin

Belkin USB VIDEOBUS P73261 Manual de usuario

Belkin

Belkin P73851-B Manual de usuario

Belkin

Belkin F8E449 Manual de usuario

Belkin

Belkin F6D6050ea Manual de usuario

Belkin

Belkin Gigabit Powerline HD Networking Adapter Manual de usuario

Belkin

Belkin F5D7330 Manual de usuario

Belkin

Belkin F5U004 Manual de usuario

Belkin

Belkin F5D4071 Manual de usuario

Belkin

Belkin F5U002vea Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario