Behringer HELLBABE HB01 Manual de usuario

HELLBABE HB01

Ultimate Wah-Wah Pedal with Optical Control

Thank you for showing your condence in us by purchasing the Behringer HELLBABE HB01. This professional Wah-Wah pedal

is specially designed to provide everything you need for all-style classic and modern sounds. Thanks to its high-performance

features like exible Q control, freely adjustable heel-down frequency range (perfect for use with bass guitars), tunable boost

function and much more you’re armed with a tool for serious musicians yearning for the most up-to-date sounds to add new

dimensions to their creativity.

WHERE TO PUT YOUR WAH-WAH

Most guitar players put their Wah-Wah pedal before time based eects like reverb, anger, chorus, vibrato etc. This assures

that the eects are added to the Wah-Wah sound. Even all kinds of distortion/overdrive eects should be placed before this unit

to achieve best tone results.

1. Controls

(1) This is the pedal of the HB01. The unit will be activated as soon as you put your foot on and move it. By taking your foot

from the pedal the eect will be deactivated. Depending on the timer adjustment (see (10)) the HB01 remains active for a few

seconds after that.

(2) The RANGE control lets you extend the heel-down frequency to match the frequency range of bass guitars for example

(440 Hz to 250 Hz).

(3) The BOOST switch activates the boost function. The output level is then increased - but only if the Wah eect is switched on.

(4) The BOOST control adjusts the level of output boost (max. +15 dB). This control is only active if the BOOST switch is set to ON

(and if the Wah is switched on).

(5) The Qcontrol allows to change the shape of the lter peak. High Q settings (turned to right position) produce a large,

selective lter peak with a high output level. Low Q settings (turned to left position) provide a lower output level

with a subtle, broad lter peak producing less vocal eect.

(6) Turning the FINE control allows to extend the toe-down frequency of the sweep range up to 2.2 kHz.

(7) Use this ¼" TS IN connector to plug in the instrument cable.

(8) The ¼" TS OUT connector sends the eected signal to your amp.

(9) The ¼" TS OUT/BYPASS connector can be used as second output or as bypass, hard wired to the input, to play out

the uneected signal.

(10) The TIMER ADJ control (accessable through a hole in the housing) is needed to adjust the time the eect remains active

after taking your foot from the pedal.

(11) Use the 9 V connection to plug in a 9 V power supply (not included).

(12) The STATUS-LED illuminates when the eect is activated.

(13) The BOOST-LED illuminates when the boost function is activated.

(14) The rocker screw allows to adjust the resistance of the rocker mechanism.

(13) (12) (14)

(1) (3) (5) (6) (8) (9)

(4) (11) (7) (10) (2)

V 5.0

HELLBABE HB01

Music Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description, photograph,

or statement contained herein.Technical specications, appearances and other information are subject to change without notice. All trademarks

are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake,Tannoy,Turbosound, TC Electronic,TC Helicon, Behringer, Bugera,

Oberheim, Auratone and Coolaudio are trademarks or registered trademarks of MusicTribe Global Brands Ltd. © MusicTribe Global Brands Ltd.

The BATTERY COMPARTMENT is located at the bottom of the unit. Open the lid to install or replace the 9 V battery.

◊◊ The HB01 has no on/o switch. As soon as you insert the jack into the IN connector, the HB01 begins running.

When not using the HB01, remove the jack from the IN connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom of the unit.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.

Contact our qualied servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

3. Limited Warranty

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty,

please see complete details online at musictribe.com/warranty.

4. Specications

Input

Connector ¼" TS

Impedance 1 MΩ

Output

Connector ¼" TS

Impedance 1 kΩ

Output/Bypass

Connector ¼" TS

Impedance 1 kΩ

Power Supply

9 V, 100 mA DC regulated

PSU-SB-CN Behringer 220 VAC adaptor China

PSU-SB-EU Behringer 230 VAC adaptor Europe

PSU-SB-JP Behringer 100 VAC adaptor Japan

PSU-SB-SAA Behringer 240 VAC adaptor Australia

PSU-SB-UK Behringer 240 VAC adaptor UK

PSU-SB-UL Behringer 120 VAC adaptor USA

Power connector 2 mm DC jack, negative center

Battery 9 V type 6LR61

Power consumption 30 mA

Dimensions/Weight

Dimensions (H x W x D) 3.8 x 4.7 x 10" / 99 x 120 x 254 mm

Weight 2.6 lbs / 1.2 kg

Behringer is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may

be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from

those listed or shown.

Otros manuales para HELLBABE HB01

Otros manuales de Pedal de música de Behringer

Behringer

Behringer OVERDRIVE DISTORTION OD100 Manual de usuario

Behringer

Behringer PEDAL BOARD PB1000 Manual de usuario

Behringer

Behringer V-TONE BASS DRIVER DI BDI21 Manual de usuario

Behringer

Behringer ULTRA FUZZ UZ400 Manual de usuario

Behringer

Behringer SUPER PHASE SHIFTER SP400 Manual de usuario

Behringer

Behringer Blues Overdrive BO300 Manual de usuario

Behringer

Behringer ULTRA FLANGER UF100 Manual de usuario

Behringer

Behringer VIRTUALIZER 3D FX2000 Manual de usuario

Behringer

Behringer Noise Reducer NR300 Manual de usuario

Behringer

Behringer ULTRA DISTORTION UD300 Manual de usuario

Behringer

Behringer COMPRESSOR/LIMITER CL9 Manual de usuario

Behringer

Behringer TUBE AMP MODELER TM300 Manual de usuario

Behringer

Behringer Echo Machine EM600 Manual de usuario

Behringer

Behringer DIGITAL DELAY DD600 Manual de usuario

Behringer

Behringer HEAVY DISTORTION HD300 Manual de usuario

Behringer

Behringer VINTAGE DISTORTION VD1 Manual de usuario

Behringer

Behringer MIDI FOOT CONTROLLER FCB1010 Manual de usuario

Behringer

Behringer Digital Multi-FX FX600 Manual de usuario

Behringer

Behringer VINTAGE DELAY VD400 Manual de usuario

Behringer

Behringer ULTRA METAL UM300 Manual de usuario

Behringer

Behringer FC600 Manual de usuario

Behringer

Behringer BASS LIMITER ENHANCER BLE400 Manual de usuario

Behringer

Behringer Noice Reducer NR100 Manual de usuario

Behringer

Behringer DR100 Manual de usuario

Manuales populares de Pedal de música de otras marcas

Whirlwind

Whirlwind oc-bass Manual de usuario

Strymon

Strymon Lex-rotary Manual de usuario

Lexicon

Lexicon MX200 Manual de usuario

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Manual de usuario

Matthews Effects

Matthews Effects Whaler V2 Manual de usuario

Grid 1

Grid 1 Pedal Jeanie Manual de usuario

Amptweaker

Amptweaker tightboost Manual de usuario

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Manual de usuario

PuzzleSounds

PuzzleSounds DR. Q ENVELOPE FILTER Manual de usuario

BYOC

BYOC Analog Chorus Manual

Dimavery

Dimavery EPVP-50 Manual de usuario

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Manual de usuario

Pro-MIDI

Pro-MIDI G25 Manual de usuario

DW 7000 Manual de usuario

FAMC

FAMC Liquid-Foot Jr. Series Manual de usuario

Dimavery

Dimavery EPOD-50 Overdrive Manual de usuario

TREX

TREX ToneBug Totenschläger Manual de usuario

BBE

BBE ORANGE SQUASH Manual de usuario