Beckhoff CP37 Series Manual de usuario

Installation and Operating instructions for

CP37xx

Multi-touch Panel PC

Version: 1.4

Date: 2020-10-28

 Table of contents 
 
CP37xx 1 
Table of contents 
1Foreword 3
1 Notes on the Documentation 3 
1.1 Liability Conditions 3 
1.2 Trademarks 3 
1.3 Patent Pending 3 
1.4 Copyright 3 
1.5 State at Delivery 3 
1.6 Delivery conditions 3 
2 Description of safety symbols 4 
3 Basic safety measures 5 
4 Operator’s obligation to exercise diligence 6 
4.1 National regulations 6 
4.2 Procedure in the event of a fault 6 
4.3 Operator requirements 6 
2Product Description 7
1 Product overview 7 
2 Appropriate Use 9 
3 Access to the connectors 9 
3.1 Installing the Cables 10 
4 Connections 11 
4.1 Network Interface (X101) 11 
4.2 Power Supply (X102) 12 
4.3 Additional interfaces (optional) 12 
4.4 Ground connection 12 
5 Connection Cables 13 
5.1 Connection Cables for the Power Supply, optional 13 
5.2 Ethernet connection cables, optional 13 
6 Access to the battery and the CFast card slots 14 
3Installation 15
1 Transport and Unpacking 15 
1.1 Transport 15 
1.2 Unpacking 15 
4Mounting 16
1 Mounting arm adapter 16 
2 Mounting the mounting arm tube 17 
2.1 Adjusting the mounting arm tilt function 18 

Table of contents 
 
2CP37xx 
3 Power Supply of the Industrial PC 19 
3.1 Beckhoff power supply technology 19 
4 Connecting Power Supply 21 
4.1 Cable Cross Sections 21 
4.2 Check voltage rating and connect 21 
4.3 Configuration for shutting down the PC 21 
4.4 PC_ON and Power Status functions 21 
4.5 Wiring diagram 22 
5 Connecting the Panel PC 23 
5.1 Connecting cables 23 
5.2 Earthing measures 23 
5Operating Instructions 24
1 Switching the Panel PC on and off 24 
1.1 Switching on 24 
1.2 Shutting down and switching off 24 
1.3 First switching on and driver installation 24 
2 Operation 24 
3 Servicing and maintenance 25 
3.1 Cleaning 25 
3.2 Maintenance 25 
3.3 Replacing the battery 25 
4 Emergency procedures 25 
5 Shutting down 25 
5.1 Disposal 25 
6UPS Software Components (optional) 26
1 Installation on the PC 26 
2 Help files 26 
Troubleshooting 27
7Assembly dimensions 28
8Technical Data 29
9Appendix 30
1 Beckhoff Support and Service 30 
1.1 Beckhoff branches and partner companies 30 
1.2 Beckhoff company headquarters 30 
2 Approvals for USA and Canada 31 
3 FCC Approvals for the United States of America 31 
4 FCC Approval for Canada 31 

Foreword

CP37xx 3

1 Foreword

1.1 Notes on the Documentation

This description is only intended for the use of trained specialists in control and automation engineering

who are familiar with the applicable national standards. It is essential that the following notes and

explanations are followed when installing and commissioning these components.

The responsible staff must ensure that the application or use of the products described satisfy all the

requirements for safety, including all the relevant laws, regulations, guidelines and standards.

1.1.1 Liability Conditions

The documentation has been prepared with care. The products described are, however, constantly under

development. For that reason the documentation is not in every case checked for consistency with

performance data, standards or other characteristics. In the event that it contains technical or editorial

errors, we retain the right to make alterations at any time and without warning. No claims for the

modification of products that have already been supplied may be made on the basis of the data, diagrams

and descriptions in this documentation.

All pictures shown in the documentation are exemplary. Illustrated configurations can differ from standard.

1.1.2 Trademarks

Beckhoff®, TwinCAT®, EtherCAT®, Safety over EtherCAT®, TwinSAFE®, XFC®and XTS®are registered

trademarks of and licensed by Beckhoff Automation GmbH.

Other designations used in this publication may be trademarks whose use by third parties for their own

purposes could violate the rights of the owners.

1.1.3 Patent Pending

The EtherCAT Technology is covered, including but not limited to the following patent applications and

patents: EP1590927, EP1789857, DE102004044764, DE102007017835 with corresponding applications

or registrations in various other countries.

The TwinCAT Technology is covered, including but not limited to the following patent applications and

patents: EP0851348, US6167425 with corresponding applications or registrations in various other

countries.

1.1.4 Copyright

©Beckhoff Automation GmbH & Co. KG.

The reproduction, distribution and utilization of this document as well as the communication of its contents

to others without express authorization are prohibited. Offenders will be held liable for the payment of

1.1.5 State at Delivery

All the components are supplied in particular hardware and software configurations appropriate for the

application. Modifications to hardware or software configurations other than those described in the

documentation are not permitted, and nullify the liability of Beckhoff Automation GmbH & Co. KG.

1.1.6 Delivery conditions

In addition, the general delivery conditions of the company Beckhoff Automation GmbH & Co. KG apply.

Foreword

4CP37xx

1.2 Description of safety symbols

The following safety symbols are used in this operating manual. They are intended to alert the reader to

the associated safety instructions.

DANGER

Acute risk of injury!

If you do not adhere the safety advise adjoining this symbol, there is immediate

danger to life and health of individuals!

WARNING

Risk of injury!

If you do not adhere the safety advise adjoining this symbol, there is danger to life and

health of individuals!

CAUTION

Hazard to individuals!

If you do not adhere the safety advise adjoining this symbol, there is obvious hazard to

individuals!

Attention

Hazard to devices and environment

If you do not adhere the notice adjoining this symbol, there is obvious hazard to

materials and environment.

Note

Note or pointer

This symbol indicates information that contributes to better understanding.

Foreword

CP37xx 5

1.3 Basic safety measures

Before the Panel PC is switched off, software that is running must be properly closed.

Otherwise it is possible that data on the storage medium is lost. Please read the section Switching the

Panel PC on and off.

Warning

Switch off all parts of the equipment, then uncouple the Panel PC

Before opening the housing, and whenever the Panel PC is not being used for control

purposes (such as during functional checks after a repair), all parts of the equipment

must first be switched off, after which the Panel PC is to be disconnected from the

equipment.

Disconnect the device by unplugging the connectors on the rear side of the Panel PC.

Items of equipment that have been switched off must be secured against being switched on again.

Warning

Do not exchange any parts when under power

When components are being fitted or removed, the supply voltage must be switched

off.

Fitting work on the Panel PC can result in damage:

•if metal objects such as screws or tools fall onto operating circuit boards

•if connecting cables internal to the Panel PC are removed or inserted during

operation.

Foreword

6CP37xx

1.4 Operator’s obligation to exercise diligence

The operator must ensure that

•the product is only used as intended (see chapter Product Description)

•the product is in a sound condition and in working order during operation

•the product is operated, maintained and repaired only by suitably qualified and authorized

personnel

•the personnel is instructed regularly about relevant occupational safety and environmental

protection aspects, and is familiar with the operating manual and in particular the safety notes

contained herein

•the operation manual is in good condition and complete, and always available for reference at the

location of the product.

Note

Do not open the housing of the Panel PC!

For technical support contact Beckhoff Service.

1.4.1 National regulations

Depending on the type of machine and plant in which the Industrial PC is used, national regulations

governing the controllers of such machines will apply, and must be observed by the operator. These

regulations cover, amongst other things, the intervals between inspections of the controller. The operator

must initiate such inspections in good time.

1.4.2 Procedure in the event of a fault

In the event of faults at the Industrial PC, the list in the section Troubleshooting can be used to determine

the measures to be taken.

1.4.3 Operator requirements

Anyone who uses the Industrial PC must have read these operating instructions and must be familiar with

all the functions of the software installed on the Industrial PC to which he has access.

Product Description

CP37xx 7

2 Product Description

2.1 Product overview

Multi-touch Panel PC

With the CP37xx series, a Panel PC with multi-touch can be used directly in the field. The devices in a

slender aluminium housing feature complete IP65 protection and are designed for mounting arm

installation. The Panel PCs offer high computing power with Intel® Atom™ processors with up to four

cores.

A choice of seven different multi-touch TFT displays in sizes between 12-inch and 24-inch in 4:3, 5:4 or

wide screen formats are available. Cooling is achieved by means of cooling fins on the outer wall as well

as fans inside the closed housing. The operating temperature range is 0 to 45 °C.

The Panel PC features an integrated rotatable and tiltable mounting arm adapter for a 48 mm diameter

mounting arm tube. There is a choice of attaching the mounting arm from above or below. The connecting

cables are laid through the mounting arm.

The Industrial PC connections (up to four) with IP65 connectors are positioned in the large wiring space

and are easily accessible. The wiring area can be opened easily without dismounting the device from the

mounting arm, offering fast access to the IP65 connectors for power supply, Ethernet and optional USB or

RS232. Prefabricated cables in various lengths are available for all connections.

The C37xx series Panel PCs are supplied with a 24 V power supply unit, optionally with integrated

uninterruptible power supply (UPS). A battery pack can be connected externally and installed on a DIN

rail in the control cabinet.

The CP37xx Panel PCs are equipped with one or two CFast cards. The data media and the lithium

battery of the system clock are accessible from the rear under the cover.

Product Description

8CP37xx

The multi-touch Panel PCs offer the following benefits:

•Industrial PC with Control Panel for mounting arm installation

•rotatable and tiltable mounting arm adapter for Rittal and Rolec mounting arm systems with

48 mm tube from top, optional from the bottom

•wiring area for up to 4 IP65 connectors

•2 slots for CFast cards

•CFast cards and lithium battery of the system clock, changeable from outside

•passive cooling through heat sink; internal fan for equal heat distribution to all the walls of the

housing

•protection class IP65

•operating temperature 0…45 °C.

Otros manuales para CP37 Series

Tabla de contenidos

Otros manuales de Panel táctil de Beckhoff

Beckhoff

Beckhoff CP32-1600 Series Manual de usuario

Beckhoff

Beckhoff CP32-2 Series Manual de usuario

Beckhoff

Beckhoff CPX2719 Manual de usuario

Beckhoff

Beckhoff CP770 140 Series Manual de usuario

Beckhoff

Beckhoff CP32 -2 -0020 Series Manual de usuario

Beckhoff

Beckhoff CP72 Series Manual de usuario

Beckhoff

Beckhoff C9900-G070 Guía del usuario

Beckhoff

Beckhoff CP72 Series Manual de usuario

Beckhoff

Beckhoff CP6606 Manual de usuario

Beckhoff

Beckhoff CP32 Series Manual de usuario

Beckhoff

Beckhoff CP37 Series Manual de usuario

Beckhoff

Beckhoff CP64 Series Manual de usuario

Beckhoff

Beckhoff CP6600-0001-0020 Manual de usuario

Beckhoff

Beckhoff CP72 Series Manual de usuario

Beckhoff

Beckhoff CP6700-0001-00 0 Series Manual de usuario

Beckhoff

Beckhoff CP27 Series Manual de usuario

Beckhoff

Beckhoff CP37-1600 Series Manual de usuario

Beckhoff

Beckhoff CP62 Series Manual de usuario

Beckhoff

Beckhoff CP6600 Manual de usuario

Beckhoff

Beckhoff CP32-2-0020 Series Manual de usuario

Beckhoff

Beckhoff CP6201 Manual de usuario

Beckhoff

Beckhoff CP2712 Manual de usuario

Beckhoff

Beckhoff CP6606-0001-0020 Manual de usuario

Beckhoff

Beckhoff CP37-1600 Series Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario