BAFANG UB600 Manual de usuario

CONSUMER MANUAL – DP C18.CAN

CONTENT

UB600 DISPLAY MANUAL

1 Important Notice 

2 Introduction 3

3 Product Description 4

3.1 Performance 4

3.2 Functions Overview 4

4 Indication Area 5

5 Button Definition 5

6 Normal Operation 6

6.1 Power ON/OFF 6

6.2 Power assistance level selection 6

6.3 Mileage mode and Speed mode 6

6.4 Headlight /backlight 7

6.5 Walk assistance mode 8

6.6 “SERVICE” indication 8

7 User Setting 9

7.1 “SETTING” interface 9

7.2 “Display setting” interface 9

7.3 “Information” interface 13

8 Error Code Definition 15

9 Maintenance 18

FiSHAW 2020

2CONSUMER MANUAL – DP C18.CAN

1 IMPORTANT NOTICE

All user must be sure to aware of the

following:

• If the fault information cannot be eliminated

according to the instructions, must give up

to proceed with the operation, please con-

tact the local dealer or professional.

• Do not to let water soak the wiring ports

and buttons.

• Although this product is designed to be

completely waterproof for riding in rainy

days, do not let this product soak in water or

use in water.

• Do not clean the Pedelec with a steam jet,

high-pressure cleaner or water hose. Water

may seep into the electrics or drive and

destroy the equipment.

• Please use this product with care and wit-

hout strong impact.

• Do not use thinner or other solvents to

clean any of the HMI. Such substances may

damage the surfaces.

• Contact your local distributor if your product

needs to upgrade.

• Be not guaranteed to wear out due to nor-

mal use and aging.

FiSHAW 2020

INTRODUCTION

CONSUMER MANUAL – DP C18.CAN

2 INTRODUCTION

• Name: smart display and controller (HMI)

• Model: DP C18.CAN

• The housing material is PC, the window is

high hardness glass, as following:

• Cable label identiﬁcation is as following:

DPC18CP10101.0

PD051205

Note: Contents in Label part are important

information of this product. Please keep them

properly for updating of software or providing

after-sales service.

FiSHAW 2020

4CONSUMER MANUAL – DP C18.CAN

3 PRODUCT DESCRIPTION

3.1 Performance

• Operating temperature: -20℃~45℃

• Storage temperature: -20℃~50℃

• Water-proof grade: IP65

• Storage humidity: 30%-70% RH

3.2 Functions Overview

• Speed indication (including maximum speed

and average speed, unit switching between

km and mile).

• Battery capacity indication.

• Control and indication for the headlight

(light sensation).

• Brightness adjustment for backlight.

• Indication of power assistance level.

• Motor output power and output current

indication.

• Time indication for single riding.

• Trip indication (including single-trip distance,

total distance and remaining distance).

• Walk assistance model.

• Support level setting.

• Indication for consumption of energy CALO-

RIES (Note: If the display has this function).

• Indication for the remaining distance. (Note:

it needs the display supports this function).

• Power-on password setting.

FiSHAW 2020

INDICATION AREA

CONSUMER MANUAL – DP C18.CAN

4 INDICATION AREA













SERVICE

1Time indication

2USB charge indication: When external device

connect into the display, it display the

symbol

3Headlight indication

4Speed scale display

5Mode selection: single-trip distance (TRIP)

→total distance ODO →maximum speed

(MAX) →average speed (AVG) →remaining

distance (RANGE) →energy consumption

(CALORIES) →time (TIME). (Note: same

function needs the Controller supports)

6Indication for the current remaining capacity

of battery.

7Voltage indication/percentage indication.

8Speed digital indication.

9Power indication/current indication (with

scale).

10 Power assistance level indication/Walk

assistance, Note: symbol means Walk

assistance model.

11 Data indication: displays current data corres-

ponding to the mode.

12 “Service”indication.

5 BUTTON DEFINITION

ON/OFF

Down

Mode

Headlight

FiSHAW 2020

6CONSUMER MANUAL – DP C18.CAN

6 NORMAL OPERATION

6.1 Power ON/OFF

Press and hold (>2S) to power on the display, the display begin to operate. Press and hold

(>2S) again to power off the display.

If the "automatic shutdown" time is set to 5 minutes (it can be set in function "Auto Off"), the HMI

will be automatically turned off within this set time, When it is not operated. If password function is

turned on, than must input correct password to enter into the normal display interface.

6.2 Power assistance level selection

When HMI power on, brieﬂy press or (<0.5S) to switch the assistance level (the number of

assistance level needs to be adapted to controller), The lowest level is Level 0, the highest Level is 5.

On the default is Level 1,“0”means no power assistance. The interface is as following:

6.3 Mileage mode and Speed mode

Brieﬂy press (0.5s) to view the mileage and speed information.

1. System with torque sensor, circularly show the trip distance (TRIP)→total distance (ODO) →max-

imum speed (MAX) →average speed (AVG) →remaining distance (RANGE) →energy consumption

(CALORIES) →time (TIME).

2. If system with a speed sensor, circularly show the trip distance (TRIP)→total distance (ODO) →

maximum speed (MAX) →average speed (AVG) →remaining distance (RANGE) →time (TIME).

FiSHAW 2020

NORMAL OPERATION

CONSUMER MANUAL – DP C18.CAN

6.4 Headlight /backlight

Press and hold (>2S) to turn on the backlight as well as headlight.

Press and hold (>2S) again to turn off the backlight and the headlight. The brightness of back-

light can be set in function“Brightness”. (If the display is turned on in a dark environment, the display

backlight/ headlight will be turned on automatically. If the display backlight/headlight are turned off

manually, they also need to be turned on manually afterwards)

FiSHAW 2020

8CONSUMER MANUAL – DP C18.CAN

6.5 Walk assistance mode

When your Pedelec is motionless, press button until the Walk assistance indicator is dis-

played. At this point, long press button, the Pedelec enters the walk assistance mode, the indica-

tor If release the button will stop this,if no any operations within 5s will automatically return to 0

level. That is stopped from the Walk assistance mode.(as following)

6.6 “SERVICE” indication

HMI will prompt for maintenance according to the mileage and battery charger times. When mileage

exceeds 5000km and the "Service" function is enabled, the "SERVICE" indication will be displayed

every time. This function can be set in the interface. For the operation is detailed in the following

text.

FiSHAW 2020

USER SETTING

CONSUMER MANUAL – DP C18.CAN

7 USER SETTING

7.1 “SETTING” interface

After the HMI powered on, brieﬂy

press(<0.5S) for two times to enter into

the “SETTING”. Brieﬂy press (<0.5S) or

to select and then brieﬂy press (<0.5S) to

conﬁrm and enter into the option.

Select “EXIT” and brieﬂy press(<0.5S) to

exit, or brieﬂy press (<0.5S) for two times

in any interface to exit, then the set dates

are saved.

If there is no any operation within 20s, the

set interface will be exited and no any dates

are saved (as following).

7.2 “Display setting” interface

In “SETTING” interface, brieﬂy press (<0.5S)

or to select “Display setting” and then

brieﬂy press (<0.5S) to conﬁrm and enter

into “Display setting”. There are thirteen

options in this interface.

7.2.1 “Unit” --- set unit for km/mile

Brieﬂy press (<0.5S) or to select

“Unit”, and then brieﬂy press (<0.5S)

to enter into the interface. Select “Metric”/

“Imperial”, and then brieﬂy press (<0.5S)

to save and exit back to “Unit” interface,

then brieﬂy press (<0.5S) for two times to

exit or you can also select “BACK” → “EXIT”

to exit back to the main interface.

FiSHAW 2020

10 CONSUMER MANUAL – DP C18.CAN

7.2.2 “Service Tip” --- turn on/off the

Service indication

Brieﬂy press (<0.5S) or to select

“SERVICE”, and then brieﬂy press (<0.5S)

to enter into the interface. Select “ON/YES”,

and then brieﬂy press (<0.5S) to save

and exit back to “Service Tip” interface, then

brieﬂy press (<0.5S) for two times to exit

or you can also select “BACK” → “EXIT” to

exit back to the main interface.

7.2.3 “Brightness” --- set backlight

brightness

Brieﬂy press (<0.5S) or to select

“Brightness”, and then brieﬂy press (<0.5S)

to enter into the interface. Select the per-

centage as “100%”/ “75%”/ “50%”/ “30%”/

“10%”. 100% means the highest brightness,

10% is lowest brightness. And then brieﬂy

press (<0.5S) to save and exit back to

“Brightness” interface, then brieﬂy press

(<0.5S) for two times to exit or you can

also select “BACK” → “EXIT” to exit back to

the main interface.

7.2.4 “Auto Off” --- set automatic Off

time

Brieﬂy press (<0.5S) or to select “Auto

Off”, and then brieﬂy press (<0.5S) to

enter into the interface. Select the automatic

Off time as “OFF”/“9”/ “8”/“7” /“6”/“5”/“4”

/“3”/“2”/“1”, OFF means don't turn off.

The unit is in minute. And then brieﬂy press

(<0.5S) to save and exit back to “Auto

Off” interface, then brieﬂy press (<0.5S)

for two times to exit or you can also select

“BACK” → “EXIT” to exit back to the main

interface.

7.2.5 “MAX PAS” --- set riding mode

Brieﬂy press (<0.5S) or to select “MAX

PAS”, and then brieﬂy press (<0.5S)

to enter into the interface. Select support

mode: 3/5/9. And then brieﬂy press (<0.5S)

to save and exit back to “MAX PAS” in-

terface, then brieﬂy press (<0.5S) for two

times to exit or you can also select “BACK”

→ “EXIT” to exit back to the main interface.

7.2.6 “Power View” --- set output display

mode

Brieﬂy press (<0.5S) or to select “Pow-

er View”, and then brieﬂy press (<0.5S)

to enter into the interface. Select the output

display mode as “Power” / “Current”. And

then brieﬂy press (<0.5S) to save and exit

back to “Power View” interface, then brieﬂy

press (<0.5S) for two times to exit or

you can also select “BACK” → “EXIT” to exit

back to the main interface. As following:

FiSHAW 2020

Tabla de contenidos

Otros manuales de Accesorios para bicicletas de BAFANG

BAFANG

BAFANG H400 Manual de usuario

BAFANG

BAFANG DP E171.CAN Manual de usuario

BAFANG

BAFANG E-SYSTEM Manual de usuario

BAFANG

BAFANG DP C171.UART Manual de usuario

BAFANG

BAFANG C961 Manual de usuario

BAFANG

BAFANG DP C15.UART Manual de usuario

BAFANG

BAFANG DP C171.UART Manual de usuario

BAFANG

BAFANG H310 Manual de usuario

BAFANG

BAFANG DP C18.UART Manual de usuario

BAFANG

BAFANG DP C240.CAN Manual de usuario

BAFANG

BAFANG BT C01.340.UART Manual de usuario

BAFANG

BAFANG DP C13.CAN Manual de usuario

BAFANG

BAFANG DP C18.CAN Manual de usuario

BAFANG

BAFANG DP C230.CAN Manual de usuario

BAFANG

BAFANG C961 Manual de usuario

BAFANG

BAFANG DP E161.CAN Manual de usuario

BAFANG

BAFANG DP C10.UART Manual de usuario

BAFANG

BAFANG DP C10.UART Manual de usuario

BAFANG

BAFANG M510 Manual de usuario

BAFANG

BAFANG BT C01.340.UART Guía de referencia

BAFANG

BAFANG DP C10.CAN Manual de usuario

BAFANG

BAFANG C966 Instrucciones de operación

BAFANG

BAFANG BT F15.655.C Manual de usuario

BAFANG

BAFANG H600 Manual de usuario

Manuales populares de Accesorios para bicicletas de otras marcas

Sigma

Sigma BC 16.16 Manual de usuario

Playcore

Playcore Dero Setbacks Manual de usuario

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manual de usuario

Cateye

Cateye RAPID X2 Manual de usuario

buratti meccanica

buratti meccanica Clorofilla Trail Manual de usuario

Shimano

Shimano SG-8R20 Instrucciones de funcionamiento

BOB

BOB YAK Manual de usuario

APLIC

APLIC 303303/20190717TW012 Manual de usuario

SRAM

SRAM AXS BlipBox Manual de usuario

Garmin

Garmin EDGE 500 Manual de usuario

Shimano

Shimano FD-RX810 Manual de usuario

Cateye

Cateye V2C - Manual de instrucciones

KMART

KMART 43115907 Manual de usuario

SIGMA SPORT

SIGMA SPORT Buster 2000 Manual de usuario

NVO Components

NVO Components STEM Manual de usuario

DAXYS

DAXYS BP188 Manual de usuario

XLC

XLC BV-W17 Manual de usuario

Deda Elementi

Deda Elementi SUPERBOX Manual de usuario