Shimano FD-RX810 Manual de usuario
(English)
Dealer's Manual
ROAD MTB Trekking
City Touring/
Comfort Bike URBAN SPORT E-BIKE
FRONT DERAILLEUR
GRX
FD-RX810
FD-RX400
DM-GAFD001-00
2
CONTENTS
CONTENTS .................................................................................2
IMPORTANT NOTICE ..................................................................3
TO ENSURE SAFETY...................................................................4
LIST OF TOOLS TO BE USED ......................................................6
INSTALLATION/REMOVAL .........................................................7
Installing the front derailleur................................................................7
• Installing the backup plate ...................................................................................................... 7
• Installing the front derailleur .................................................................................................. 9
• If using a band adapter (SM-AD91) to install the front derailleur...................................... 12
ADJUSTMENT ..........................................................................15
Installing the inner cable and adjusting gear shifting ......................15
• Securing the cable .................................................................................................................. 15
• Adjusting cable tension ......................................................................................................... 19
• Top adjustment....................................................................................................................... 20
• Low adjustment...................................................................................................................... 22
• Handling the cable end.......................................................................................................... 23
• Checking gear shifting and fine tuning................................................................................ 24
MAINTENANCE........................................................................25
Replacing the skid plate ......................................................................25
• Removing the skid plate ........................................................................................................ 25
• Installing the skid plate.......................................................................................................... 25
3
IMPORTANT NOTICE
IMPORTANT NOTICE
• This dealer's manual is intended primarily for use by professional bicycle mechanics.
Users who are not professionally trained for bicycle assembly should not attempt to
install the components themselves using the dealer's manuals.
If any part of the information on the manual is unclear to you, do not proceed with the
installation. Instead, consult a place of purchase or a bicycle dealer for their assistance.
•Make sure to read all owner's manuals included with the product.
•Do not disassemble or modify the product other than as stated in the information
contained in this dealer's manual.
•All owner's manuals and dealer's manuals can be viewed on-line our website (http://si.
shimano.com).
•For consumers who do not have easy access to the internet, please contact a SHIMANO
distributor or any of the SHIMANO offices to obtain a hardcopy of the User's Manual.
•Please observe the appropriate rules and regulations of the country, state or region in
which you conduct your business as a dealer.
For safety, be sure to read this dealer’s manual thoroughly before use, and
follow it for correct use.
The following instructions must be observed at all times in order to prevent personal injury
and physical damage to equipment and surroundings.
The instructions are classified according to the degree of danger or damage which may occur
if the product is used incorrectly.
DANGER Failure to follow the instructions will result in death or serious
injury.
WARNING Failure to follow the instructions could result in death or
serious injury.
CAUTION Failure to follow the instructions could cause personal injury or
physical damage to equipment and surroundings.
4
TO ENSURE SAFETY
TO ENSURE SAFETY
WARNING
• Be sure to follow the instructions provided in the owner's manual when installing the
product.
It is recommended to use SHIMANO genuine parts only. If parts such as bolts and nuts
become loose or damaged, the bicycle may suddenly fall over, which may cause serious
injury.
In addition, if adjustments are not carried out correctly, problems may occur, and the
bicycle may suddenly fall over, which may cause serious injury.
•Be sure to wear safety glasses or goggles to protect your eyes while performing
maintenance tasks such as replacing parts.
•After reading the dealer's manual thoroughly, keep it in a safe place for later reference.
Be sure to also inform users of the following:
•Be careful not to let the hemming of your clothes get caught in the chain while riding.
Otherwise, you may fall off the bicycle.
NOTICE
Be sure to also inform users of the following:
•If gear shifting operations cannot be carried out smoothly, clean the derailleur and
lubricate all moving parts.
•When the chain is in any of the positions shown in the figure, the chain may come into
contact with the front chainring or front derailleur and generate noise. If noise is a
problem, shift the rear sprocket to the next largest gear or the one after.
Double
Front chainring
Rear sprocket
5
TO ENSURE SAFETY
•Products are not guaranteed against natural wear and deterioration from normal use
and aging.
•For maximum performance we highly recommend SHIMANO lubricants and maintenance
products.
For Installation to the Bicycle, and Maintenance:
•Use an OT-SP sealed cable and cable guide for smooth operation.
•Grease the inner cable and the sliding portions of the outer casing before use to ensure
that they slide properly.
Do not let dust adhere to the inner cable. If the grease on the inner cable is wiped off,
the application of SIS SP41 grease (Y04180000) is recommended.
•If using a full outer model, the end of the
outer casing with the outer cap (resin type)
should be at the derailleur side.
•If using it in a cold region, use a sealed
outer cap (resin type) to prevent freezing.
Cap with long tongue
Outer cap (resin type)
Derailleur side
•If looseness in the links is so great that gear shifting adjustments cannot be made,
replace the derailleur.
The actual product may differ from the figure because this manual is intended
mainly to explain the procedures for using the product.
6
LIST OF TOOLS TO BE USED
LIST OF TOOLS TO BE USED
The following tools are needed for installation, adjustment, and maintenance purposes.
Tool
2 mm hexagon wrench
4 mm hexagon wrench
5 mm hexagon wrench
Nippers
7
INSTALLATION/REMOVAL
Installing the front derailleur
INSTALLATION/REMOVAL
NOTICE
•With a carbon frame, even the recommended tightening torque may be too tight and
cause damage to the frame, or too loose and not sufficiently attached to the frame.
For the appropriate torque value, consult with the manufacturer of the completed
bicycle or the manufacturer of the frame.
Installing the front derailleur
Installing the backup plate
If installing the front derailleur to a brazed-on type frame, a backup plate must be attached to
the seat tube.
Be sure to install this in order to prevent damage to the frame from the pressure of the front
derailleur support bolt.
Tape
[1]
1. Check the installation location.
Check the position where the support bolt directly touches the frame when the support
bolt of the front derailleur is being adjusted.
8
INSTALLATION/REMOVAL
Installing the front derailleur
2. Install the backup plate.
Avoid positioning the tape that attaches the backup plate to the seat tube in the location
where the support bolt directly touches the frame.
Backup plate
Backup plate
Tape
Support bolt
9
INSTALLATION/REMOVAL
Installing the front derailleur
Installing the front derailleur
1. Adjust the installation height and temporarily attach the front
derailleur to the frame.
Adjust the installation height so that the distance from the tips of the teeth of the largest
chainring is 1 - 3 mm.
1 - 3 mm
Chain guide outer plate
Largest chainring
10
INSTALLATION/REMOVAL
Installing the front derailleur
2. Adjust the position of the chain guide.
Use the low adjustment bolt to align the front end of the chain guide outer plate with
the surface of the largest chainring.
At this point, adjust the chain guide so that its rear end is 0.5 - 1.0 mm inside.
Low adjustment bolt
Front end of chain guide outer
plate
Rear end of chain guide
0.5 - 1 mm
Largest chainring
3. Fix the front derailleur in place.
Mounting bolt
5 - 7 N·m
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios para bicicletas de Shimano
Shimano
Shimano ALFINE Inter-11 Manual de usuario
Shimano
Shimano DURA-ACE CS-R9200 Manual de usuario
Shimano
Shimano RD-M773 Instrucciones de funcionamiento
Shimano
Shimano SC-MT800 Manual de usuario
Shimano
Shimano HB-M3050 Manual de usuario
Shimano
Shimano ST-7S20 Instrucciones de funcionamiento
Shimano
Shimano E8000 STEP Manual de usuario
Shimano
Shimano CS-7900 Instrucciones de funcionamiento
Shimano
Shimano RD-FT30 - TECHNICAL Instrucciones de funcionamiento
Shimano
Shimano DURA-ACE FD-7900 Instrucciones de funcionamiento
Shimano
Shimano INTER 5E Manual de usuario
Shimano
Shimano FD-M660-10E Manual de usuario
Shimano
Shimano XT series Instrucciones de funcionamiento
Shimano
Shimano FD-M665 Instrucciones de funcionamiento
Shimano
Shimano RD-M810 Manual de usuario
Shimano
Shimano FC-CX70 Instrucciones de funcionamiento
Shimano
Shimano SW-RS801-S Manual de usuario
Shimano
Shimano SORA FC-R3000 Manual de usuario
Shimano
Shimano FC-2200 Instrucciones de funcionamiento
Shimano
Shimano DI2 Adapter B Manual de usuario
