BAFANG DP C10.UART Manual de usuario
EN
USER MANUAL
DP C10.UART
2
USER MANUAL DP C10.UART
CONTENT
Important Notice....................................................4
For your safety........................................................5
Note.......................................................................6
Overview of Product ...........................................7
1 Specifications and Parameter of the Display..............7
2 Appearance and Dimensions....................................7
3 Funcion Overview and Key Definitions......................8
4 Normal Operation..................................................10
5 Parameter Setting...................................................12
6 Error Code Definitons.............................................19
Serive and Warranty Policy....................................20
CONTENT
3USER MANUAL DP C10.UART
4
USER MANUAL DP C10.UART
IMPORTANT NOTICE
IMPORTANT NOTICE
Make sure you have read this Dealer Manual
carefully in order to use the product properly.
•This product conforms to <<The Technical
Specification and Standard of design for
BAFANG's electrical component>> and is
based on << BAFANG Communication
Protocol-V5.6>>;The matching kits also
should be compatible with above
mentioned protocol and other BAFANG's
mpatible protocol.
5
USER MANUAL DP C10.UART
6
NOTE
HANDLING INFORMATION
USER MANUAL DP C10.UART
•Pluging or displuging the HMI with power
on is forbidden.
Please contact the seller for help when any
error codes show on the HMI or any failure
come .
Please use this product in the given
circumstance indicated in the manual.
7
1 Specifications and Parameters of the Display
• 24V / 36V / 43V / 48V Power Supply
• Rated Current: 10mA
• Maximum Operating Current: 30mA
• Power-off Leakage Current: < 1uA
• Operating Current Supplied to the Controller: 50 mA
• OperationTemperature: -20℃— +60℃
• Storage Temperature: -20℃— +60℃
• Waterproof Grade: IP65
• Storage Humidity: 30 % -- 70 %
2 Appearance and Dimensions
2.1 Materials and Dimensions
•
•
The shell is made of PC.
The liquid crystal display is made of hardened PMMA.
USER MANUAL DP C10.UART
OVERVIEW OF PRODUCT
The matching kits also should be compatible with above
mentioned protocol and other BAFANG's mpatible protocol.
•
•
This product conforms to <<The Technical
Specification and Standard of design for
BAFANG's electrical component>> and is based
on << BAFANG Communication Protocol-V5.6>>
3 Function Overview and Key Definitions
3.1 Function Overview
• Use of a two-way serial communication protocol,
simple operation of the display via the external
5-key keypad.
• Speed display: displaying the real-time speed as
SPEED, the maximum speed as MAXS, the
average speed as AVG, remaining range TO
GO, Power W, Calory C .
• km or mile: The user can choose between km
and mile.
• Intelligent battery level indication: With an
optimization algorithm, a stable display of the
battery level is ensured, and the problem of fluc-
tuant battery level indication common with other
displays is avoided.
• Automatic light-sensitive lights:The headlight,
taillight and display light will be automatically
turned on/ off depending on lighting conditions.
• 5 levels off display backlighting: Different levels
• 5-Level-Support: setting power Levels 1 to 5
• Trip distance indication:The maximum distance
displayed is 99999. Single-trip distances TRIP or
the total distance TOTAL can be displayed.
• Display of error messages
• Walk assistance
• Settings: Various parameters, e.g. mode, wheel
diameter, speed limit etc., can be set on the com
-
puter via a communication cable. See the setting
• Maintenance warning (this function can be deac -
tived): Maintenance warning information is dis-
played based on battery charge cycles and riding
distance. The display automatically estimates the
battery life and gives warnings when the number
of charge cycles exceeds the set value. A warning
will also be displayed when the accumulated total
riding distance exceeds the set value.
3.2 Information on the Display
USER MANUAL DP C10.UART
H
C
Headlight indication: only shows when headlight
or backlight are on
C
B
F
Speed display: display of the speed, km/h or mph
F
D
Error display: When a fault is detected the
symbol will be displayed.
D
E
Menu
E
A
M
N
O
P
L
K
J
G
I
ABattery level: 10-segment battery indication; the
voltage that each segment represents can be
customized
BUSB charge
GMax speed
HAvg speed
IRemaining mileage
Level indication: The chosen level 1–5 will be
displayed; if there is no numeric display, it means
that there is no assistance (by the motor). If the
rider is walking and pushing the e-bike, will
be displayed.
J
OVERVIEW OF PRODUCT
8
USER MANUAL DP C10.UART
9
J
K
3.3 Key Definitions
A up
B down
C headlight
D on/off
E mode
Speed mode: average speed (AVG km/h), maxi-
mum speed (MAXS km/h)
O
Maintenance warning: When there is a need for
maintenance the symbol will be dis-
played (riding distance or the number of battery
charge cycles exceed the set value, function can
be deactivated)
P
NTotal mileage
Walk assistance
K
MDistance mode: display of the single-trip distance
TRIP and the total distance TOTAL
Distance indication: display of the distance
depending on the setting.
L
10
4
4.1 On/Off Switch
Turn on the device. Press and hold for 2 seconds
to power on the display. Press and hold again for
2 seconds to power off the display. If the bike is not
used, after 5 minutes (time can be set) the display will
be automatically turned off.
4.2 Assist Mode Selection
In the manual gearshift mode, press the or
to choose the desired level of support by the motor.
The lowest level is Level 1, the highest Level 5. When
the display is on, the default mode is Level 1. When
there is no numeric mode display, there is no power
assistance.
Selecting the level for motor assistance
4.3 Switch between Distance Mode
and Speed Mode
Briefly press to switch between distance and
speed. Single-trip distance (TRIP km) total distance
(TOTAL km) maximum speed (MAXS km/h)
average riding speed (AVG km/h)
successive order.
Switching between displays
DISPLAY (DP C10.UART)
USER MANUAL DP C10.UART
Remaining range
are displayed in
（TO GO km ） Power(w） Calory (c)
OVERVIEW OF PRODUCT
Normal Operation
Otros manuales para DP C10.UART
2
Tabla de contenidos
Otros manuales de Accesorios para bicicletas de BAFANG
BAFANG
BAFANG C965 Manual de usuario
BAFANG
BAFANG DP C240.CAN Manual de usuario
BAFANG
BAFANG DP C10.CAN Manual de usuario
BAFANG
BAFANG H310 Manual de usuario
BAFANG
BAFANG C961 Manual de usuario
BAFANG
BAFANG UB40 Manual de usuario
BAFANG
BAFANG DP C01.RS 232.7 Manual de usuario
BAFANG
BAFANG DP C231.CAN Manual de usuario
BAFANG
BAFANG DP C15.CAN Manual de usuario
BAFANG
BAFANG M510 Manual de usuario
BAFANG
BAFANG M625 Manual de usuario
BAFANG
BAFANG DP C240.CAN Manual de usuario
BAFANG
BAFANG BT F15.655.C Manual de usuario
BAFANG
BAFANG H610 Manual de usuario
BAFANG
BAFANG C965 Manual de usuario
BAFANG
BAFANG DP C07.UART Manual de usuario
BAFANG
BAFANG MM G31.250 Manual de usuario
BAFANG
BAFANG DP C10.UART Manual de usuario
BAFANG
BAFANG DP C10.UART Manual de usuario
BAFANG
BAFANG DP E170.CAN Manual de usuario
Manuales populares de Accesorios para bicicletas de otras marcas
Sigma
Sigma BC 16.16 Manual de usuario
Playcore
Playcore Dero Setbacks Manual de usuario
VDO Cyclecomputing
VDO Cyclecomputing x3dw Manual de usuario
Cateye
Cateye RAPID X2 Manual de usuario
buratti meccanica
buratti meccanica Clorofilla Trail Manual de usuario
Shimano
Shimano SG-8R20 Instrucciones de funcionamiento
