Bacharach Fyrite Tech 50 Manual de usuario

Fyrite®Tech 50 & 60

Quick Start Guide 24-9429

Rev. 1 – September 2003

- 5 - - 6 -

This Guide provides basic information about how

to turn ON the analyzer and conduct a combustion

efciency test. Detailed information concerning

the analyzer’s operation, set up, and calibration is

contained in Instruction 24‑9428.

Turning ON the Analyzer

1. Place the probe tip in the area that contains

the burner’s combustion‑air source. This

step allows the analyzer to measure the

combustion‑air temperature during the

analyzer’s warm‑up period.

2. Press analyzer’s I/O button.

3. Wait for the analyzer to complete its

60 second warm‑up period.

Performing a Combustion Test

4. Press the or button to select the desired

fuel and then press ENTER. The fuel codes are:

F1 = Natural Gas F3 = LPG

F2 = Oil #2 F4 = Kerosene

Example: “F1” denotes

Natural Gas

Sampling Locations

Insert the probe in the areas shown in the

following illustrations to measure stack

temperature, ue‑gas O2 content, and ue‑gas CO

content (Model 60 only).

Water Trap / Filter Maintenance

Drain the water condensate collected in the water

trap after every test.

Replace the lter element (P/N 07‑1644) when dirty.

Atmospheric Burner or

Gravity Vented Forced Air

Hot Water

Tank

Atmospheric or

Gravity Vented

Boiler

80% Eff. Fan Assist

or Power Vented

Furnace/Boiler

90% Eff.

Condensing

Furnace/Boiler

Bacharach, Inc.

621 Hunt Valley Circle, New Kensington, PA 15068

Ph: 724-334-5000 • Fax: 724-334-5001 • Toll Free: 800-736-4666

Website: www.bacharach-inc.com • E-mail: [email protected]

Printed in U.S.A. ® Registered Trademark

WATER TRAP

CHAMBER

Pull apart using a slight

twisting motion

FILTER

CHAMBER FILTER ELEMENT

Pry apart filter chamber using

a small flat-blade screwdriver

inserted into notch

“A” “B”

When reassembling

the trap, make sure

that surfaces “A” and

“B” are in contact

- 3 - - 4 -

5. Press the or button to display the “Stack

Temperature & Efciency” Screen.

6. Insert probe into the burner’s ue‑gas stream

(see Sampling Locations on Pages 5 and 6).

7. Burner‑service procedures can now begin.

The readings diplayed on the analyzer will

update continuously, showing the changes in

burner performance.

8. Use the and buttons to scroll through the

analyzer’s other screen displays while a test is

in progress. (The order in which the screens

are displayed is shown on Pages 3 and 4.)

9. Press the HOLD button to stop the pump and

freeze all readings. Press ENTER to resume

testing.

Ending a Combustion Test

WARNING! Burn hazard. Do not touch

the probe after removing it from the ue-gas

stream. Allow the probe to cool before han-

dling (about 5 minues).

10. End a test by rst removing the probe from

the ue‑gas stream, and then allowing the

pump to run until the O2 reading reaches

approximately 20.9%.

Turning OFF the Analyzer

11. Turn OFF the analyzer by pressing the I/O

button. There is a 5‑second delay before the

analyzer actually turns OFF, during which

time the unit can be turned back ON by

pressing the ENTER button.

A Fyrite Tech 60 will not turn OFF if a high

level of CO is still being detected. The pump

will remain running and the message “PurG

CO” is displayed until the detected CO level

drops below 50 ppm. This purge process can be

bypassed by again pressing the I/O button.

Screen Displays – Fyrite Tech 50

Use the and  buttons to scroll through the

screens.

Screen Displays – Fyrite Tech 60

Use the and  buttons to scroll through the

screens.

- 2 -

251

CO2

EXCESS AIR

787

STACK F1

EFF

°F

AMBIENT F1

°F

ppm

CO ppm

AIR FREE

ENTER

Fuel Select:

F1 = Natural Gas

F2 = Oil #2

F3 = LPG

F4 = Kerosene

Ambient Air

Temperature

Stack

Temperature &

Efciency

CO2&

Excess Air

Fuel Select:

F1 = Natural Gas

F2 = Oil #2

F3 = LPG

F4 = Kerosene

CO &

CO Air Free

Ambient Air

Temperature

Stack

Temperature &

Efciency

CO2&

Excess Air

Otros manuales para Fyrite Tech 50

Este manual sirve para los siguientes modelos

Otros manuales de Equipo de prueba de Bacharach

Bacharach

Bacharach Fyrite INSIGHT Manual de usuario

Bacharach

Bacharach DIOXOR 19-7038 Manual de usuario

Bacharach

Bacharach H-10G Manual de usuario

Bacharach

Bacharach PCA3 Manual de usuario

Bacharach

Bacharach Leakator 10 Manual de usuario

Bacharach

Bacharach Tru Pointe Manual de funcionamiento

Bacharach

Bacharach TRUE-SPOT Hoja de datos

Bacharach

Bacharach Fyrite INSIGHT Instrucciones de instalación y funcionamiento

Bacharach

Bacharach Portable Combustion Analyzer 24-9351 Manual de instalación y operación

Bacharach

Bacharach True Spot Manual de usuario

Bacharach

Bacharach OXOR II 19-7037 Manual de usuario

Bacharach

Bacharach MGC200 Manual de funcionamiento

Bacharach

Bacharach Monoxor III Manual de usuario

Bacharach

Bacharach Leakator 10 Manual de usuario

Bacharach

Bacharach ECA 450 Manual de usuario

Bacharach

Bacharach Model 105 Manual de usuario

Bacharach

Bacharach IEQ Chek Manual de usuario

Bacharach

Bacharach DIOXOR II Manual de usuario

Bacharach

Bacharach INJECTOR CALIBRATOR CD3 Manual de usuario

Bacharach

Bacharach Fyrite Pro Manual de funcionamiento

Bacharach

Bacharach PCA 2 24-9448 Manual de instalación y operación

Bacharach

Bacharach Fyrite Tech 50 Manual

Bacharach

Bacharach Florite 800 Manual de instrucciones

Bacharach

Bacharach Refrigerant Recovery System 3600 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario