AZZA PT-5IT Manual de usuario

PT-5IT

SYSTEM BOARD

( VER. 1.x )

OPERATION MANUAL

PT-5IT SYSTEM BOARD TABLE OF CONTENTS

TABLE OF CONTENTS

Chapter & Section Page

1. INTRODUCTION .................................................................................................. 1

1.1 SYSTEM OVERVIEW................................................................................ 1

1.2 FEATURES................................................................................................... 1

2. SPECIFICATIONS ................................................................................................ 1

3. SYSTEM BOARD LAYOUT .............................................................................. 1

3.1 PT-5IT VER. 1.x.......................................................................................... 1

4. HARDWARE SETUP ........................................................................................... 2

4.1 UNPACKING ............................................................................................... 2

4.2 HARDWARE CONFIGURATION........................................................... 2

4.2.1 DRAM INSTALLATION...........................................................................2

4.2.2 L2 CACHE MEMORY INSTALLATION.............................................3

4.2.3 CONNECTORS............................................................................................ 4

4.2.4 JUMPERS ..................................................................................................... 8

5. AWARD BIOS SETUP ........................................................................................ 1

5.1 GETTING STARTED ................................................................................ 1

5.2 MAIN MENU............................................................................................... 2

5.3 CONTROL KEYS....................................................................................... 2

5.4 STANDARD CMOS SETUP..................................................................... 3

5.5 BIOS FEATURES SETUP ........................................................................ 4

5.6 CHIPSET FEATURES SETUP ................................................................ 6

5.7 POWER MANAGEMENT SETUP.......................................................... 7

5.8 PNP/PCI CONFIGURATION ................................................................... 7

5.9 INTEGRATED PERIPHERALS .............................................................. 11

THE OTHER SETUPS ....................................................................................... 12

PT-5IT SYSTEM BOARD

TRADEMARKS

All trademarks used in this manual are the property of their respective owners.

NOTE

The “LOAD SETUP DEFAULTS” function loads the default settings directly from

BIOS default table, these default settings are the best-case values that should optimize

system performance and increase system stability . This function will be necessary

when you accept this system board, or the system CMOS data is corrupted.

By pressing “Enter ” key. the SETUP default values will be loaded. (please refer to the

Chapter 5 AWARD BIOS SETUP procedures in this maulal.)

NOTICE

Information presented in this manual has been carefully checked for reliability;

however, no responsibility is assumed for inaccuracies. The information contained in

this manual is subject to change without notice.

PT-5IT SYSTEM BOARD INTRODUCTION

I. INTRODUCTION

A. SYSTEM OVERVIEW

ThePT-5ITPentium PCI Local Bus system board is designed based on the Intel

82430TX PCIset system chipset and Winbond I/O chipset, which built-in two channels

PIO and Bus Master Enhanced PCI IDE port, one Floppy Disk control port, two high

speed Serial ports (UARTs) and one multimode Parallel prot and also supports IR and

USB ports. It is designed to fit a high performance, Pentium 75 MHz to 233 MHz based

solution for high-end and true GREEN-PC computer systems.

This system board supports the Peripheral Component Interconnect (PCI) Local Bus

standard (PCI Specification Rev. 2.1 compliant). It not only breaks through the I/O

bottlenecks of the traditional ISA main board, but also provides the performance needs

for networking and multi-user environments.

A. FEATURES

The PT-5IT system board contains the following features:

Pentium P54C/P54CT/P54CS/P55C, Cyrix 6x86 / 6x86L & AMD K5 /K6 based,

PC/AT compatible system board with ISA Bus and PCI Local Bus.

Supports the most part of "586" level CPUs designed by Intel, Cyrix and AMD.

Built-in 2 sets voltage regulator circuit to support multi-specification CPU I/O

voltage (+3.3V DC and +3.52V DC) and CPU CORE voltage (+2.8V DC).

DRAM Memory : Supports fast page mode (FPM), Extended Data Out (EDO) and

SDRAM (synchronous) memory.

Cache Memory : Supports pipelined burst SRAMs. Cache size up to 512KB.

BIOS : Supports Plug and Play BIOS.

IDE ports : Supports two channels PIO and Bus Master Enhanced PCI IDE

port, up to Mode 4 timing, and up to 14 MBytes/s transfer rates.

Supports “Ultra DMA 33” transfers up to 33 MBytes/sec.

PT-5IT SYSTEM BOARD INTRODUCTION

I/O ports : Supports two high speed serial ports (UARTs), One multimode

parallel port for standard (SPP), enhanced (EPP) and high speed

(ECP) modes. One Floppy Disk Control port.

IR Port : Supports IR (Infrared Rays) functions. Both HPSIR and ASKIR

are supported.

USB Ports : Supports two Universal Serial Bus (USB) ports.

Software : MS-DOS, WindowsNT, OS2, XENIX, UNIX, NOVELL, CAD

compatibility / CAM, compatibility Windows, Windows 95....etc.

PT-5IT SYSTEM BOARD SPECIFICATIONS

I. SPECIFICATIONS

Chipset

Intel 82439TX, 82371AB and Winbond W83977TF.

CPU

Intel : Pentium processor and OverDrive processor (P54C / P54CS / P54CTB /

P55C) 75 / 90 / 100 / 120 / 133 / 150 / 166 / 180 / 200 / 233 MHz.

Cyrix : 6x86 / 6x86L - P120+ / P133+ / P150+ / P166+ / P200+.

AMD : K5-PR75 / PR90 / PR100 / PR120 / PR133 / PR150 / PR166 and K6.

CPU VCC

(1).CPU I/O voltage : "+3.3V DC" and "+3.52V DC".

(2).CPU CORE voltage : "+2.8V DC".

System Clock

50 / 55 / 60 / 66.6 / 75MHz adjustable.

Memory

DRAM : Two banks, each bank could be single or double sided, 8MB up to

256MB. Supports fast page mode (FPM) , Extended Data Out (EDO)

and SDRAM memory (Using 72-pin SIMM module x4, and 168-pin

DIMM module x2). DIMMs' operating voltage supports +5V DC or

+3.3V DC adjustable. 5 Qword deep buffer for posted write, and

Dword and Burst merging.

SRAM : 256KB or 512KB pipelined burst SRAM on board , supports

Direct-Mapped write back cache memory.

BIOS

AWARD System BIOS. 128KBx8 Flash ROM (for Plug & Play BIOS).

Expansion Slots

PCI Slots : 32-bit x 4 (All Master/Slave, PCI 2.1 Compliant).

ISA Slots : 16-bit x4 (One slot PCI/ISA shared).

PT-5IT SYSTEM BOARD SPECIFICATIONS

IDE Ports

Two channel PIO and Bus Master PCI IDE ports, maximum could be connected to

4 IDE Hard Disk and ATAPI CD-ROM device. Supports up to Mode 4 timing, and

up to 22 MBytes/s transfer rates and supports Ultra DMA 33 mode transfers up to

33MBytes/sec.

Super I/O Ports

1. Two high speed NS16C550 compatible serial ports (UARTs).

2. One SPP/EPP/ECP mode Bi-directional parallel port.

3. One Floppy Disk Control port.

IR Port

One HPSIR and ASKIR compatible Infrared port.

Mouse and Keyboard

Supports PS/2 Mouse connector, PS/2 Keyboard connector (option) and AT

Keyboard connector.

USB Ports

Two Universal Serial Bus (USB) ports.

DIMENSION

Width & Length : 220 mm x 255 mm.

Height : 3/4 inches with components mounted, but without expansion

boards and cables.

PCB Thickness : 4-layers, 0.05 inches normal.

Weight : 20 ounces.

ENVIRONMENT

Operating Temperature : 10to 40. (50to 104)

Require Airflow : 50 linear feet per per minute across CPU.

Storage Temperature : -40to 70. (-40to 158)

Humidity : 0 to 90noncondensing.

Altitude : 0 to 10,000 feet.

PT-5IT SYSTEM BOARD HARDWARE SETUP

I. SYSTEM BOARD LAYOUT

A. PT-5IT VER. 1.x

Explanation : ll connectors, jumpers and components which marks by a black point on

the corner means the pin-1 side of the connector, jumper and component.

PCI 3

PCI 2

SL3

CN1 POWER CON.

CN5

AT K/B

SIMM 4

SIMM 3

SIMM 2

SIMM 1

Intel

82439TX

BAT 1

CPU

CN8 LPT

COM B

CN10

CN2

PS/2

MS.

CN11

JP13

CN13

U1 TAG

SPEAKER

KEYLOCK

Winbond

W83977TF

SL2

SL4

JP6

JP12

Socket 7

CN9

COM A

JP2

CN12

USB 2 USB 1

JP4

JP5

SL1

Intel

82371AB

JP11

JP8

JP10

JP7

JP1

SL1

PCI 4

PCI 1

SL2

SL3

SL4

CN6 FDC.

CN3 IDE2

CN7 IDE1

DIMM 1

DIMM 2

CN14

JP4

JP3

Burst

Pipeline

SRAM

32K/64K *32

Pipeline

Burst

SRAM

32K/64K *32

JP9

SYS. BIOS

PT-5IT SYSTEM BOARD HARDWARE SETUP

I. HARDWARE SETUP

A. UNPACKING

The system board package should contain the following parts :

The PT-5IT system board.

OPERATION MANUAL.

Cable set for IDE and I/O device.

A. HARDWARE CONFIGURATION

Before the system board is ready to operate, the hardware must be configured to allow

for various functions within the system. To configure the PT-5IT system board is a

simple task, only a few jumpers, connectors, cables and sockets needs to be selected and

installed. (For the detailed locations of each component please refer to the "system

board layout figure" which appears in page 3-1.)

1. DRAM INSTALLATION

The PT-5IT system board will support two banks main memory (bank0 and bank 1) on

board, (using four 72-Pin SIMM socket, SIMM 1 - 4 and two 168-pin DIMM socket,

DIMM 1 - 2) each bank could be single-sided or double-sided, 8MB up to 256 MB of

local memory can be attained. Supports standard fast page mode (FPM), Extended Data

Out (EDO) and synchronous (SDRAM) memory.

The usable DRAM modules are : (Note : S = Single-sided , D = Double-sided)

(1) FPM and EDO memory : 512Kbx32 ( 2MB),1Mbx32 ( 4MB),

2Mbx32 ( 8MB),4Mbx32 (16MB),

8Mbx32 (32MB), 16Mbx32 (64MB)

(2) SDRAM memory : 1Mbx64 ( 8MB),2Mbx64 (16MB),

4Mbx64 ( 32MB), 8Mbx64 (64MB)

16Mbx64 (128MB).

The speed of FPM DRAMs must be used 70ns or faster than 70ns, the speed of EDO

DRAMs and SDRAMs must be used 60ns or faster than 60ns.

SIMMs' and DIMM's operating voltage :

PT-5IT SYSTEM BOARD HARDWARE SETUP

(1) SIMM1 - SIMM4 : + 5V DC

(2) DIMM1 - DIMM2 : +3.3V DC or +5V DC

(factory default at +3.3V DC, adjusted by “purchase order”)

DRAM Bank can be populated in any order (bank 0 does not have to be populated

before bank 1).Within any given bank, the SIMMs (DIMM) must be the same size.

Among the two banks, SIMM (DIMM) densities can be mixed in any order. EDO, FPM

and SDRAMs can be mixed between SIMMs (DIMM), a given SIMM (DIMM) must

contain only one type of DRAM. When DRAM types are mixed each SIMM (DIMM)

runs optimized for that particular type of DRAM.

There is no jumper needed for DRAM configuration, DRAMs' type and size will be

detected by system BIOS automatically.

The following table provides the possable combinations for DRAM memory

installation.

Bank 0 Bank 1

SIMM1 and SIMM2 DIMM1 SIMM3 and SIMM4 DIMM2

Single-sided Empty Single-sided Empty

Double-sided Empty Double-sided Empty

Empty Single-sided Empty Single-sided

Empty Double-sided Empty Double-sided

Note : We strong recommend, Don't install 5V SIMM module and 3.3V DIMM

modules at the same time.

1. L2 CACHE MEMORY INSTALLATION

The PT-5IT system board will support 256KB or 512KB cache memory on board, using

synchronous pipeline-burst SRAMs. Both Write Back and Write Through cache update

policy are supported.

The following table lists the detalied combination about cache memory installation.

Cache Size Data SRAMs(U7 , U8) Tag SRAMs(U1)

256 KB 32KB x 32 8KB or 16KB or 32KB x 8

512 KB 64KB x 32 16KB or 32KB x 8

Tabla de contenidos

Otros manuales de Placa madre de AZZA

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario