Avtech AVC484A Manual de usuario

377Z

484a_V1.0

USER MANUAL

High Resolution Dome Camera

Please read the instructions thoroughly before using the product.

377Z

484a_V1.0

USER MANUAL

High Resolution Dome Camera

Please read the instructions thoroughly before using the product.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ROHS Announcement

All lead-free products offered by the company comply with the requirements of the European law on the

Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and

products are strictly “lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected

seperately at the product end-of-life. This applies to your product and any peripherals marked with this

symbol. Do not dispose of these products as unsorted municipal waste.

CE Mark

This apparatus is manufactured to comply with the radio interference.

The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to

revise or remove any content in this manual at any time.

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.

Only operate this apparatus from the type of power source indicated on the label.

The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the

possibility of such damages.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This exclamation point within an equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

ROHS Announcement

All lead-free products offered by the company comply with the requirements of the European law on the

Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and

products are strictly “lead-free” and without the hazardous substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected

seperately at the product end-of-life. This applies to your product and any peripherals marked with this

symbol. Do not dispose of these products as unsorted municipal waste.

CE Mark

This apparatus is manufactured to comply with the radio interference.

The company does not warrant that this manual will be uninterrupted or error-free. We reserve the right to

revise or remove any content in this manual at any time.

To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.

Only operate this apparatus from the type of power source indicated on the label.

The company shall not be liable for any damages arising out of any improper use, even if we have been advised of the

possibility of such damages.

FEATURES

1. 1/3" color CCD sensor with SONY Effio DSP

2. High resolution

3. F1.4 Large aperture

4. f3.8 ~ f9.5mm vari-focal lens

5. Supports 0.05 Lux at F1.4

6. Vandal-proof housing design (IPxx7)

PACKAGE CONTENT

Please make sure you have the following items in your sales package:

 Vari-Focal Dome Camera

with Power and Video Cable * 1

 User Manual * 1

FEATURES

1. 1/3" color CCD sensor with SONY Effio DSP

2. High resolution

3. F1.4 Large aperture

4. f3.8 ~ f9.5mm vari-focal lens

5. Supports 0.05 Lux at F1.4

6. Vandal-proof housing design (IPxx7)

PACKAGE CONTENT

Please make sure you have the following items in your sales package:

 Vari-Focal Dome Camera

with Power and Video Cable * 1

 User Manual * 1

SPECIFICATIONS*

-f

Pick up Element 1/3" Color CCD image sensor with SONY Effio DSP

Number of Pixel 768(H)x494(V) <NTSC> / 752(H)x582(V) <PAL>

Resolution Super High Resolution

Min. Illumination 0.05 Lux / F1.4

S/N Ratio More than 48dB (AGC off)

Electronic Shutter 1/60 (1/50) to 1/100,000 sec

Vari-focal Lens f3.8mm ~ f9.5mm

Lens Angle 85.4°～36°

IRIS Mode AES

White Balance ATW

IP Rating IPxx7

Video Output 1.0 Vp-p composite, 75Ω

Power Source (±10%) DC12V

Current Consumption 70mA

Dimensions (mm)** 124.3(Ø) x 92(H)

Net Weight (g) 460

* The specifications are subject to change without notice.

** Dimensional Tolerance: ± 5mm

SPECIFICATIONS*

-f

Pick up Element 1/3" Color CCD image sensor with SONY Effio DSP

Number of Pixel 768(H)x494(V) <NTSC> / 752(H)x582(V) <PAL>

Resolution Super High Resolution

Min. Illumination 0.05 Lux / F1.4

S/N Ratio More than 48dB (AGC off)

Electronic Shutter 1/60 (1/50) to 1/100,000 sec

Vari-focal Lens f3.8mm ~ f9.5mm

Lens Angle 85.4°～36°

IRIS Mode AES

White Balance ATW

IP Rating IPxx7

Video Output 1.0 Vp-p composite, 75Ω

Power Source (±10%) DC12V

Current Consumption 70mA

Dimensions (mm)** 124.3(Ø) x 92(H)

Net Weight (g) 460

* The specifications are subject to change without notice.

** Dimensional Tolerance: ± 5mm

LENS ANGLE ADJUSTMENT

The lens can be panned left or right for angle adjustment, maximum 60°respectively from the

default position .

CONNECTION

1. DC12V Terminal

Connect the power connector of the camera to a DC 12V regulated power supply.

NOTE: Please use a regulated DC12V power adaptor to operate this unit. The power tolerance of this unit is DC12V

± 10% (DC 10.8V ~ DC 13.2V). A power input of more than the DC 13.2V will damage this unit.

2. Connect the camera video output to the input of the DVR with a 75Ωcoaxial cable.

LENS ANGLE ADJUSTMENT

The lens can be panned left or right for angle adjustment, maximum 60°respectively from the

default position .

CONNECTION

1. DC12V Terminal

Connect the power connector of the camera to a DC 12V regulated power supply.

NOTE: Please use a regulated DC12V power adaptor to operate this unit. The power tolerance of this unit is DC12V

± 10% (DC 10.8V ~ DC 13.2V). A power input of more than the DC 13.2V will damage this unit.

2. Connect the camera video output to the input of the DVR with a 75Ωcoaxial cable.

INSTALLATION

Step1 Remove the Dome Cover

Remove the Dome Cover by turning it

counterclockwise to the end and then take it off.

Step2 Remove the Black Shield Case

First, unscrew the Black Shield Case. Then remove

it by pressing the two sides and then pulling it

outward.

INSTALLATION

Step1 Remove the Dome Cover

Remove the Dome Cover by turning it

counterclockwise to the end and then take it off.

Step2 Remove the Black Shield Case

First, unscrew the Black Shield Case. Then remove

it by pressing the two sides and then pulling it

outward.

Step3 Align the screw holes

Rotate the lens plate to the front side of the

camera, and align the gaps on the plate with the

three screw holes respectively as indicated

below. Then, aim the lens to the place you want

to watch.

Step4 Attach the camera to the ceiling

Attach the camera to the ceiling with three screws.

Then, connect the power and video cable to the

power supply and the input of the DVR for later

adjustments. (For the details of the connection,

please refer to the “CONNECTION” section).

Note:

1. Screws are not supplied with the sales package. For installation, please purchase the suitable screws.

2. For safety, always let the power and video line concealed behind the installation position.

Step3 Align the screw holes

Rotate the lens plate to the front side of the

camera, and align the gaps on the plate with the

three screw holes respectively as indicated

below. Then, aim the lens to the place you want

to watch.

Step4 Attach the camera to the ceiling

Attach the camera to the ceiling with three screws.

Then, connect the power and video cable to the

power supply and the input of the DVR for later

adjustments. (For the details of the connection,

please refer to the “CONNECTION” section).

Note:

1. Screws are not supplied with the sales package. For installation, please purchase the suitable screws.

2. For safety, always let the power and video line concealed behind the installation position.

Step5 Adjust the angle of the camera

To adjust the angle of the camera, swivel the black rotatable plate

from the center to the left or to the right, maximum 60°(Pan).

Adjust the tilt angle by moving the lens, maximum 90°(Tilt).

Use a flat-headed screwdriver to loosen the pivots on the lens.

First adjust the 1st pivot to zoom-in / out (Zoom). Second, adjust

the 2nd pivot to fine-tune the clearness of the images.

Secure these two pivots after the adjustment is completed.

Finally fasten the screw on the side of lens to fix the tilt angle

after the optimized positioning is achieved.

Note: When adjusting the title angle, please do not tilt the camera lens more than 90°.

Step5 Adjust the angle of the camera

To adjust the angle of the camera, swivel the black rotatable plate

from the center to the left or to the right, maximum 60°(Pan).

Adjust the tilt angle by moving the lens, maximum 90°(Tilt).

Use a flat-headed screwdriver to loosen the pivots on the lens.

First adjust the 1st pivot to zoom-in / out (Zoom). Second, adjust

the 2nd pivot to fine-tune the clearness of the images.

Secure these two pivots after the adjustment is completed.

Finally fasten the screw on the side of lens to fix the tilt angle

after the optimized positioning is achieved.

Note: When adjusting the title angle, please do not tilt the camera lens more than 90°.

Step6 Replace the Black Shield Case

Replace the Black Shield Case to the camera

base. Ensure that the Black Shield Case does not

cover the lens.

Step7 Replace the Dome Cover

Replace the dome cover to the camera base and

turn it clockwise to the end to secure it.

Step6 Replace the Black Shield Case

Replace the Black Shield Case to the camera

base. Ensure that the Black Shield Case does not

cover the lens.

Step7 Replace the Dome Cover

Replace the dome cover to the camera base and

turn it clockwise to the end to secure it.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Avtech

Avtech

Avtech AVN806 Series Manual de usuario

Avtech

Avtech Ezum DGC1306 Manual de usuario

Avtech

Avtech DGC5105T Manual de usuario

Avtech

Avtech AVM365 Manual de usuario

Avtech

Avtech KPC131E Manual de usuario

Avtech

Avtech IR Dome Camera Manual de usuario

Avtech

Avtech AVC307R Manual de usuario

Avtech

Avtech IC-AVM2421 Manual de usuario

Avtech

Avtech AVN806 Series Manual

Avtech

Avtech DG103 Instrucciones de funcionamiento

Avtech

Avtech AVT583 Manual de usuario

Avtech

Avtech AVN211 Manual de usuario

Avtech

Avtech DG206 Manual de usuario

Avtech

Avtech DGC1105A Manual de usuario

Avtech

Avtech AVN222 Manual de usuario

Avtech

Avtech AVM5447 Manual de usuario

Avtech

Avtech avn212 Manual de usuario

Avtech

Avtech AVN808 Manual de usuario

Avtech

Avtech dg205b Manual de usuario

Avtech

Avtech DGC5445ASE Series Manual de usuario

Avtech

Avtech Ezum DGC1304-10 Manual de usuario

Avtech

Avtech DG108X Manual de usuario

Avtech

Avtech AVM359a Manual de usuario

Avtech

Avtech AVT1206A Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario