AVE CRONOTC1B Manual de usuario
International Trademark registration n° 327040 - 942905 - 330600
Instructions for Use
Touchscreen chronothermostat - battery power supplied
CRONOTC1B / CRONOTC2B / CRONOTC3B
ENGLISH
2
Index
Introduction ...........................................................................................3
Controls and Indications ........................................................................4
Controls .................................................................................................4
Indications ..............................................................................................5
User manual............................................................................................6
Setting the date and time ........................................................................6
Summer/Winter selection ........................................................................7
Operating modes.....................................................................................7
“Manual” operating mode .......................................................................7
“Automatic” operating mode ...................................................................8
“Holiday” operating mode ........................................................................9
“Jolly” operating mode ............................................................................9
“OFF” function ........................................................................................10
Winter operation .................................................................................... 11
Summer operation.................................................................................. 11
Preset programs .....................................................................................12
Chronothermostat programming ..............................................................12
Preset parameter reset ............................................................................13
Displaying the temperature detected by the separate probe ......................13
Statistical data .......................................................................................14
Maintenance ..........................................................................................15
Keyboard lock ........................................................................................15
Touch Screen .........................................................................................15
Batteries replacement..............................................................................15
Installation .............................................................................................16
Base fastening .......................................................................................16
Electric connections ................................................................................17
Batteries fitting .......................................................................................18
Fastening the chronothermostat onto the base .........................................18
Chronothermostat configuration ...............................................................18
Technical data ........................................................................................22
3
ENGLISH
Introduction
Chronothermostat CRONOTC...B is suitable to measure the ambient temperature
and to control the heating and air conditioning system to which it is connected.
The operating mode can be chosen between the preset ones or can be customized
according to user’s needs.
The wide display shows the temperature profile - i.e.: the relationship between the time
table and the temperature to be kept -, as well as the measured temperature, relative
humidity, calculated perceived temperature, time and day of the week.
NOTE Temperature perceived is calculated according to the following formula:
Where “H” is the perceived temperature, “T” is the effective air temperature.
Values in brackets represent the empirical calculation of the air steam partial
pressure (according to the relative humidity).
The chronothermostat is battery powered. Both settings and data are stored in a non-
volatile memory capable of retaining them even when batteries are down.
It it possible to connect the chronothermostat to an external floor temperature
probe (AVE p.n 53GA91-T).
Chronothermostat is available in the following colours:
• "Domus RAL 9010" white (p.n. CRONOTC1B)
• "Life" black (p.n. CRONOTC2B)
• "Allumia" grey (p.n. CRONOTC3B)
ENGLISH
4
Controls and indications
Controls
1. Button used to select the “Manual” operating mode or increase a value (▲) *
2. Button used to select the “Automatic” operating mode or decrease a value
(▼) *
3. Button used to select the “Holiday” operating mode or go back to the previous
data item (◄) *
4. Button used to select the “Jolly” operating mode or go to the next data item
(►) *
5. Button used for the “OFF” or “Enter” functions *
6. Button used for the “Programming” or “Copy” or “Statistical data displaying”
functions *
7. Rotary selector for temperature correction: T1, Manual temperature, Jolly
temperature, and antifreeze temperature *
8. Rotary selector for correcting temperature T2 or the Jolly duration * operating
mode
9. Rotary selector for correcting temperature T3 or the Jolly duration * operating
mode
10. Summer/Winter switching key and keyboard lock
11. Chronothermostat reset button
12. Backlighted area
* The function associated with the button or selector depends on the current
operating mode. It is highlighted by the icon placed above.
1 2 3 4 5 6
5
ENGLISH
Indications
14 1 2 15 3 4 5
13 12 11 10 9 8 7 6
1. Time
2. Temperature profile
3. Temperature value T1 or “Jolly” operating mode duration (days)
4. Temperature value T2 or “Jolly” operating mode duration (hours)
5. Temperature value T3
6. System ON in Summer operation
7. System ON in Winter operation
8. Relative humidity percentage
9. Perceived temperature (displayed by the degree)
10. Ambient/external temperature
11. Current day (1 = Monday … 7 = Sunday; 8 = Holiday)
12. Winter operation
13. Summer operation
14. Battery charge level
15. keyboard lock
Note: pressing of a key is signalled by a short acoustic signal.
When ON blue backlighting will stay on for about three seconds after pressing a key
ENGLISH
6
User manual
In order to start the chronothermostat after it has been installed, proceed as follows:
1. Set the date and time.
2. Select the Summer/Winter operation.
3. Select the operating mode.
Setting the date and time
To set the current time and date, proceed as follows:
1. Enter the programming menu main page. The operating mode currently used will
be interrupted temporarily.
Choose the time setting function.
2. Modify the hour setting by means of the ▲and ▼buttons,then go to the
minute setting by means of the ►button.
3. Modify the minute setting by means of the ▲and ▼ buttons, then go to the day
setting by means of the ►button.
4. Modify the day setting by means of the ▲ button, then press ENTER to go
back to the main page of the programming menu.
5. Press ENTER again to exit the programming menu.
The chronothermostat operating mode previously interrupted will be resumed.
7
ENGLISH
Summer/Winter selection
To shift from the Winter operation (heating system) to the
Summer operation (cooling system), and vice versa, keep
the Summer/Winter button pressed for at least 4 seconds.
The selected operation will be shown on the display by
means of the “Winter” or “Summer” icons.
Operating modes
The CRONOTC...B chronothermostat features four different operating modes:
Manual, Automatic, Holiday and Jolly (in addition to the OFF function).
“Manual” operating mode
With the Manual operating mode, the chronothermostat adjusts the operation of
the heating or cooling system in order to always keep the same temperature. To
select “Manual”, press MAN.
The temperature level can be modified during operation by means of the
lower using either one of the three rotary switches on the right side of the
chronothermostat.The temperature can be changed from 2°C to 40 °C by 0.1°C
increments.
Winter Summer
ENGLISH
8
“Automatic” operating mode
With the “Automatic” operating mode, the chronothermostat adjusts the
operation of the heating or cooling system by following the profiles defined
for the various days of the week. To select “Automatic”, press AUTO.
The three temperature levels used can be modified during operation by means
of the rotary selectors located on the right side of the chronothermostat.
Temperature T3 cannot be lower than temperature T2 or higher than 40 °C.
In Summer operation mode, the upper limit of temperature T3 is 30°C. When
this value is exceeded, T3 will take the OFF value, which will involve switching
the system off.
Temperature T2 cannot be higher than temperature T3 or lower than
temperature T1.
Temperature T1 cannot be higher than temperature T2 or lower than 2 °C.
If no customization has been made, the automatic operating mode will function
with the stored temperature profiles, i.e. the preset ones (refer to «Preset
programs» pag. 35). To customize the profiles, refer to «Chronothermostat
programming» pag. 35.
9
ENGLISH
“Holiday” operating mode
With the “Holiday” operating mode, the chronothermostat adjusts the operation
of the heating or cooling system by following one single temperature profile,
which is valid for all days.
To select “Holiday”, press HOLIDAY.
To modify the temperature levels, refer to the description of the “Automatic”
operating mode (pag. 31).
When the preset programs are used (refer to «Preset programs» pag. 35), the
“Holiday” mode will follow the profile set for Saturdays and Sundays. To create a
customized “Holiday” program, refer to «Chronothermostat programming» (pag.
35).
“Jolly” operating mode
With the “Jolly” operating mode, the chronothermostat interrupts the current
operating mode and adjusts the operation of the heating or cooling system to
keep the “Jolly” temperature during the entire time set (from 1 hour to 99 days
and 23 hours, by 1 hour increments). After this time – which is displayed like a
countdown – has elapsed, the previous operation of the chronothermostat will
be resumed. To select “Jolly”, press JOLLY.
The “Jolly” temperature value and the operating mode duration can be modified
by means of the rotary selectors located on the right side of the chronothermostat.
Use the lower rotary selector to modify the temperature level.
ENGLISH
10
The temperature can be modified from 2°C to 40 °C, by 0.1 °C increments.
To set the “Jolly” operating mode duration, i.e. hours («h»), use the central rotary
selector. The hours can range from 0 to 23.
To set the “Jolly” operating mode duration, i.e. days («d»), use the upper rotary
selector.
The days can range from 0 to 99.
You can interrupt the “Jolly” mode at any time, by selecting any other operating
mode.
The “Jolly” operating mode can be used, for instance, to:
• saveenergybyloweringthetemperaturewhenthehouseisnotinhabitedatthe
weekends or winter vacation, while being sure that a comfortable temperature
will exist when the house is inhabited again);
• extendthenightheatingorcoolingbeyondtheusualtime,i.e.whenyoustayup
in the company of your guests.
“OFF” function
The “OFF” function can be activated by pressing OFF.
Otros manuales para CRONOTC1B
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Termostato de AVE
Manuales populares de Termostato de otras marcas
EWELLY
EWELLY EW-181 Manual de usuario
Prolon
Prolon T1100 Instrucciones de instalación
Computherm
Computherm Q20 Manual de usuario
Heatmiser
Heatmiser neoStat Manual de usuario
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario
