ATT 2100 TEMPERATURE TRANSMITTER Operation Manual M2100-REV-G
5
Chapter 1 Introduction
The ATT 2100/ATT 2200, Smart Temperature Transmitter is correctly calibrated at the factory before
shipment. To ensure correct and efficient use of the instrument, please read this manual
thoroughly and fully understand how to operate the instrument before operating it
①The contents of this manual are subject to change without prior notice.
②All rights r
eserved. No part of this manual may be reproduced in any form without
Autrol’s written permission.
③If any question arises or errors are found, or if any information is missing from this manual,
please inf
orm the nearest Autrol sales office.
④The specifications covered by this manual are limited to those for the standard type under the
specified model number break-down and do not cover custom-made instrument.
⑤Please note that changes in the specifications, construction, or component parts of the
instrument may not immediately be reflected in this manual at the time of change, provided that
postponement of revisions will not cause difficulty to the user from a functional or performance
standpoint.
1-1 Using This Manual
The Chapters in this operating manual provide information on installing, operating, and
maintaining devices from the AUTROL Model ATT 2100 Smart Temperature Transmitter. The Chapters
are organized as follows.
Chapter 2 Handling Cautions
Chapter 2 provides instructon on unpacking, Storage and Selecting the installation locations.
Also, installation of explosion protected type transmitters at site and about EMC Conformity standards.
Chapter 3 Transmitter Functions
Chapter 3 contains in consideration of handling Model APT3100 Smart Pressure Transmitters.
Chapter 4 Installation
Chapter 4 contains mechanical, environment consideration and electrical installation
instructions on the Model ATT 2100 Smart Temperature Transmitters.
Chapter 5 On-line Operation
Chapter 5 describes the configuration the parameter how to use variety of the Model ATT
2100 Smart Temperature Transmitters' software fucntion and configuration.
Chapter 6 Maintenance
Chapter 6 contains hardware diagnostics, troubleshooting and maintenace task.
