Autel MaxScan VAG405 Manual de usuario

Table of Contents

1. Safety Precautions and Warnings........................................1

2. Product Information .............................................................2

2.1 Tool Description..........................................................2

2.2 Specifications...............................................................3

2.3 Accessories Included...................................................3

2.4 Navigation Characters................................................3

2.5 Power............................................................................4

2.6 Product Setup ..............................................................4

2.7 Vehicle Coverage.........................................................9

3. Operating Instructions..........................................................9

3.1 VW/AUDI Diagnostics................................................9

3.2 OBDII/EOBD Diagnostics........................................16

3.3 Oil Service..................................................................19

4. Warranty and Service .........................................................34

4.1 Limited One Year Warranty ...................................34

4.2 Service Procedures....................................................34

1. Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or the scan

tool, read this instruction manual first and observe the following

safety precautions at a minimum whenever working on a vehicle:

zAlways perform automotive testing in a safe environment.

zWear safety eye protection that meets ANSI standards.

zKeep clothing, hair, hands, tools, test equipment, etc, away from

all moving or hot engine parts.

zOperate the vehicle in a well-ventilated work area; Exhaust gases

are poisonous.

zPut blocks on drive wheels and never leave vehicle unattended

while running tests.

zUse extreme caution when working around the ignition coil,

distributor cap, ignition wires and spark plugs. These components

create hazardous voltages when the engine is running.

zPut transmission in PARK (for automatic transmission) or

NEUTRAL (for manual transmission) and make sure the parking

brake is engaged.

zKeep a fire extinguisher suitable for gasoline/chemical/ electrical

fires nearby.

zDon’t connect or disconnect any test equipment with ignition on

or engine running.

zKeep the scan tool dry, clean and free from oil, water and grease.

Use a mild detergent on a clean cloth to clean the outside of the

scan tool, when necessary.

2. Product Information

2.1 Tool Description

① LCD DISPLAY -- Indicates test results. Backlit, 128 x 64 pixel

display with contrast adjustment.

② Y BUTTON -- Confirms a selection (or action) from a menu.

When a DTC’s definition covers more than one screen, it is used

to move down to the next screen for additional data.

③ N BUTTON -- Cancels a selection (or action) from a menu or

returns to the menu. It is also used to set up the unit when being

pressed and held for at least 3 seconds.

④ UP SCROLL BUTTON -- Moves up through menu and

submenu items in menu mode. When more than one DTC is

retrieved, moves up through the current screen to the previous

screens for additional DTCs and definitions.

⑤ DOWN SCROLL BUTTON -- Moves down through menu

and submenu items in menu mode. When more than one DTC is

retrieved, moves down through the current screen to the next

screens for additional DTCs and definitions.

⑥ OBD II CONNECTOR -- Connects the scan tool to the vehicle’s

Data Link Connector (DLC).

2.2 Specifications

1) Display: Backlit, 128 x 64 pixel display with contrast adjustment

2) Operating Temperature: 0 to 50°C (32 to 122 F°)

3) Storage Temperature: -20 to 70°C (-4 to 158 F°)

4) External Power: 8.0 to 15.0 Volts provided via vehicle battery

5) Dimensions:

Length Width Height

178 mm (7.00”) 95 mm (3.75”) 34 mm (1.35”)

6) NW: 0.70kg (1.54lb), GW: 1.0kg(2.20lb)

2.3 Accessories Included

1) User’s Manual -- Instructions on tool operations

2) OBD2 cable -- Provides power to tool and communicates

between tool and vehicle

3) USB Cable -- Used to upgrade the scan tool

4) Carry Case -- A nylon case to store the scan tool when not in use.

2.4 Navigation Characters

Characters used to help navigate the scan tool are:

1) “►”-- Indicates current selection.

2) “↓” -- A flashing down arrow indicates additional information is

available on the next screen.

3) “↑” -- A flashing up arrow indicates additional information is

available on the previous screen.

4) “pd” -- Identifies a pending DTC when viewing DTCs.

2.5 Power

The external power of the scan tool is provided via the vehicle Data

Link Connector (DLC). Just follow the steps below to turn on the scan

tool:

1) Connect the OBD II Cable to scan tool.

2) Find DLC on vehicle.

zA plastic DLC cover may be found for some vehicles and you

need to remove it before plugging the OBD2 cable.

3) Plug OBD II Cable to the vehicle’s DLC.

2.6 Product Setup

The scan tool allows you to make the following adjustments and

settings:

1) Contrast Adjustment: Adjusts the contrast of the LCD display.

2) Display Test: Tests the LCD display.

3) Keyboard Test: Tests the keyboard.

To enter the setup menu mode

1) From the keyboard: Press and hold the Nbutton for at least 3

seconds until the System Setup menu shows up. Follow the

instructions to make adjustments and settings as described in the

following setup options.

System Setup

►1) Contrast

2) Display Test

3) Keyboard Test

4) Unit of Measure

2) From the Main Menu: Use the UP/DOWN Scroll Buttons to

select System Setup and then press the Ybutton. Follow the

instructions to make adjustments and settings as described in the

following setup options.

Main Menu

1) VW/Audi

2) OBDII/EOBD

3) Oil Service

►4) System Setup

Contrast Adjustment

1) From the System Setup menu, use the UP/DOWN scroll buttons

to select Contrast, and press the Ybutton.

System Setup

►1) Contrast

2) Display Test

3) Keyboard Test

4) Unit of Measure

2) From the Contrast menu, use the UP/DOWN scroll buttons to

increase or decrease the contrast.

Contrast

Contrast （45%）

Use or to change

3) Press the Ybutton to save your selection and return to previous

menu.

4) Press the Nbutton to return to previous menus.

Display Test

The Display Test is used to check the LCD display.

1) From the System Setup menu, use the UP/DOWN scroll buttons

to select Display Test and press the Ybutton.

System Setup

1) Contras

►2) Display Test

3) Keyboard Test

4) Unit of Measure

2) Press the Ybutton again to start test. Look for missing spots in

the solid black characters.

Display Test

Press [Y] to test.

Look for missing

3) When completed, press the Nbutton to return.

Keyboard Test

The Keyboard Test is used to verify that the keys are functioning

properly.

1) Use the UP/DOWN scroll buttons to select Keyboard Test from

System Setup menu, and then press Ybutton.

spots in characters.

Press <N> to return.

System Setup

1) Contras

2) Display Test

►3) Keyboard Test

4) Unit of Measure

2) Press any key to start test. When you press a key, the key name

should be observed on the display. If the name does not show up,

then the key is not functioning properly.

Keyboard Test

Press any key to

Start test to

display name.

Key:

Double [N] to Return

3) Double press Nto return to the previous menu.

Unit of Measure

The Unit of Measure is used to change measurement unit between

English and metric.

1) Use the UP/DOWN scroll buttons to select Unit of Measure

from System Setup menu, and then press Ybutton.

System Setup

1) Contras

2) Display Test

3) Keyboard Test

►4) Unit of Measure

2) Use the UP/DOWN scroll buttons to change between English

and Metric, and press Y button to confirm.

Unit of Measure

►01) English

02) Metric

2.7 Vehicle Coverage

The MaxScan VAG405 VW/AUDI Code Scanner is specially

designed to work with most Volkswagen and Audis sold worldwide of

1990 or newer models. If a VW/AUDI has a 16-pin "OBD-II style"

Data Link Connector (DTC), the code reader will certainly work. If it

has an old-style 2x2 Data Link Connector (DTC), then it depends on

whether there are 4 or 3 wires connecting to the pins. If there are 4

wires, each connecting a pin, then it will work. If there are only 3

wires, leaving one pin disconnected, then it will not work.

For VW/AUDI with old-style 2x2 Data Link Connector (DTC), you

need to have a 2x2 cabling adapter which is not included in this

product package.

3. Operating Instructions

3.1VW/AUDI Diagnostics

Reading Codes

CAUTION: Don’t connect or disconnect any test equipment with

ignition on or engine running.

1) Turn the ignition off.

2) Locate the vehicle’s 16-pin Data Link Connector (DLC).

3) Plug the OBDII connector to the vehicle’s DLC.

4) Turn the ignition on. But do not start the engine.

5) Press the Ybutton. The Main Menu will be observed on the

display.

Tabla de contenidos

Otros manuales de Equipo de diagnóstico de Autel

Autel

Autel MaxiCOM MK808 Manual de usuario

Autel

Autel MaxiDAS DS808S Manual de usuario

Autel

Autel OTOFIX D1 Manual de usuario

Autel

Autel MaxiService OLS301 Manual de usuario

Autel

Autel MaxiSys MS906TS Manual de usuario

Autel

Autel MaxiTPMS TS508K Manual de usuario

Autel

Autel MaxiVCI Mini Manual de usuario

Autel

Autel MaxiVCI V100 Manual de usuario

Autel

Autel Maxiscan MS509 Manual de usuario

Autel

Autel MaxiPRO MP808BT Manual de usuario

Autel

Autel MaxiDAS DS708 Manual de usuario

Autel

Autel TS609 Manual de usuario

Autel

Autel MAXISYS MS906 Manual de usuario

Autel

Autel MaxiLink ML629 Manual de usuario

Autel

Autel MAXISYS Manual de usuario

Autel

Autel MaxiDAS DS708 Manual de usuario

Autel

Autel MaxiSys MS908CV II Manual de usuario

Autel

Autel MaxiCOM MK906S PRO Manual de usuario

Autel

Autel AutoLink AL2300 Manual de usuario

Autel

Autel MaxiAP AP200 Manual de usuario

Autel

Autel MaxiSys MS909CV Manual de usuario

Autel

Autel MaxiSys 906CV Manual de usuario

Autel

Autel MaxiTPMS TS401 Manual de usuario

Autel

Autel MOT Pro Manual de usuario

Manuales populares de Equipo de diagnóstico de otras marcas

Mindray

Mindray M7Vet Guía de inicio rápido

TEXA

TEXA TMD2 Manual de usuario

Sealey

Sealey BT2012 Manual de usuario

Diagnoptics

Diagnoptics Age Reader Manual de usuario

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Manual de usuario

Hella Gutmann

Hella Gutmann Mega macs X Manual de usuario

Foxwell

Foxwell I80TS Manual de usuario

KaVo

KaVo 3D eXam Manual de usuario

ATEQ

ATEQ VT46 Manual de usuario

Hella Gutmann

Hella Gutmann mega macs X Manual de usuario

Qiagen

Qiagen QIAcube Connect MDx Manual de usuario

Alber

Alber BDSU Manual de usuario

St. Jude Medical

St. Jude Medical QUANTIEN Manual de usuario

Bosch

Bosch DCU 100 Manual de usuario

Launch

Launch CNC-602A Manual de usuario

Innova

Innova 3568 Manual de usuario

FujiFilm

FujiFilm ED-580XT Manual de usuario

Snap-On

Snap-On Zeus Manual de usuario