Autel MaxiDAS DS808S Manual de usuario
i
Trademarks
Autel®,MaxiSys®, MaxiDAS®,MaxiScan®, MaxiTPMS®,MaxiRecorder®, MaxiCOM®, and
MaxiCheck®are trademarks of Autel Intelligent Technology Corp., Ltd., registered in
China, the United States and other countries. All other marks are trademarks or
registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise
without the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the latest
information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While information of
this manual has been carefully checked for accuracy, no guarantee is given for the
completeness and correctness of the contents, including but not limited to the product
specifications, functions, and illustrations.
Autel will not be liable for any direct, special, incidental, indirect damages or any
economic consequential damages (including the loss of profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully, paying extra
attention to the safety warnings and precautions.
For Services and Support
pro.autel.com
www.autel.com
1-855-288-3587 (North America)
+86 (0755) 8614-7779 (China)
For technical assistance in all other markets, please refer to Technical Support in this
manual.
ii
Safety Information
For your own safety and the safety of others, and to prevent damage to the device and
vehicles upon which it is used, it is important that the safety instructions presented
throughout this manual be read and understood by all persons operating or coming into
contact with the device.
There are various procedures, techniques, tools, and parts for servicing vehicles, as well
as in the skill of the person doing the work. Because of the vast number of test
applications and variations in the products that can be tested with this equipment, we
cannot possibly anticipate or provide advice or safety messages to cover every
circumstance. It is the automotive technician’s responsibility to be knowledgeable of the
system being tested. It is crucial to use proper service methods and test procedures. It
is essential to perform tests in an appropriate and acceptable manner that does not
endanger your safety, the safety of others in the work area, the device being used, or the
vehicle being tested.
Before using the device, always refer to and follow the safety messages and applicable
test procedures provided by the manufacturer of the vehicle or equipment being tested.
Use the device only as described in this manual. Read, understand, and follow all safety
messages and instructions in this manual.
Safety Messages
Safety messages are provided to help prevent personal injury and equipment damage.
All safety messages are introduced by a signal word indicating the hazard level.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury to the operator or bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury to the operator or bystanders.
Safety Instructions
The safety messages herein cover situations Autel is aware of. Autel cannot know,
evaluate or advise you as to all of the possible hazards. You must be certain that any
condition or service procedure encountered does not jeopardize your personal safety.
iii
DANGER
When an engine is operating, keep the service area WELL VENTILATED or attach a
building exhaust removal system to the engine exhaust system. Engines produce carbon
monoxide, an odorless, poisonous gas that causes slower reaction time and can lead to
serious personal injury or loss of life.
SAFETY WARNINGS
⚫Always perform automotive testing in a safe environment.
⚫Wear safety eye protection that meets ANSI standards.
⚫Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot
engine parts.
⚫Operate the vehicle in a well-ventilated work area, for exhaust gases are poisonous.
⚫Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual
transmission) and make sure the parking brake is engaged.
⚫Put blocks in front of the drive wheels and never leave the vehicle unattended while
testing.
⚫Be extra cautious when working around the ignition coil, distributor cap, ignition wires
and spark plugs. These components create hazardous voltages when the engine is
running.
⚫Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires nearby.
⚫Do not connect or disconnect any test equipment while the ignition is on or the
engine is running.
⚫Keep the test equipment dry, clean, free from oil, water or grease. Use a mild
detergent on a clean cloth to clean the outside of the equipment as necessary.
⚫Do not drive the vehicle and operate the test equipment at the same time. Any
distraction may cause an accident.
⚫Refer to the service manual for the vehicle being serviced and adhere to all
diagnostic procedures and precautions. Failure to do so may result in personal injury
or damage to the test equipment.
⚫To avoid damaging the test equipment or generating false data, make sure the
vehicle battery is fully charged and the connection to the vehicle DLC is clean and
secure.
⚫Do not place the test equipment on the distributor of the vehicle. Strong electro-
magnetic interference can damage the equipment.
iv
CONTENTS
SAFETY INFORMATION ...........................................................................................................II
SAFETY MESSAGES................................................................................................................II
SAFETY INSTRUCTIONS ...........................................................................................................II
USING THIS MANUAL...............................................................................................1
1.1 CONVENTIONS ...........................................................................................................1
GENERAL INTRODUCTION........................................................................................3
2.1 MAXIDAS DS808S TABLET .........................................................................................3
2.2 TECHNICAL SPECIFICATIONS ..........................................................................................5
2.3 ACCESSORY KIT ..........................................................................................................7
GETTING STARTED ...................................................................................................8
3.1 POWER UP................................................................................................................8
3.2 POWER DOWN.........................................................................................................11
DIAGNOSTICS ........................................................................................................12
4.1 GETTING STARTED ....................................................................................................12
4.2 VEHICLE IDENTIFICATION............................................................................................14
4.3 DIAGNOSTICS SCREEN LAYOUT ....................................................................................18
4.4 DIAGNOSIS ..............................................................................................................21
4.5 GENERIC OBDII OPERATIONS .....................................................................................35
4.6 EXITING DIAGNOSTICS ...............................................................................................38
SERVICE .................................................................................................................40
5.1 OIL RESET SERVICE....................................................................................................40
5.2 ELECTRONIC PARKING BRAKE (EPB) SERVICE .................................................................40
5.3 BATTERY MANAGEMENT SYSTEM (BMS) SERVICE ..........................................................41
5.4 STEERING ANGLE SENSOR (SAS) SERVICE......................................................................42
v
5.5 DIESEL PARTICLE FILTER (DPF) SERVICE........................................................................42
5.6 TIRE PRESSURE MONITOR SYSTEM (TPMS) SERVICE .......................................................43
5.7 IMMOBILIZER (IMMO) SERVICE..................................................................................43
OEM AUTHORIZATION...........................................................................................45
DATA MANAGER ...................................................................................................46
7.1 VEHICLE HISTORY .....................................................................................................46
7.2 WORKSHOP INFORMATION.........................................................................................48
7.3 CUSTOMER..............................................................................................................49
7.4 IMAGE....................................................................................................................50
7.5 PDF FILES ...............................................................................................................51
7.6 REVIEW DATA..........................................................................................................52
7.7 UNINSTALL APPS ......................................................................................................52
7.8 DATA LOGGING........................................................................................................52
7.9 REPORT ..................................................................................................................53
SETTINGS...............................................................................................................54
8.1 UNIT ......................................................................................................................54
8.2 LANGUAGE..............................................................................................................54
8.3 PRINTING SETTINGS ..................................................................................................55
8.4 REPORT SETTINGS.....................................................................................................56
8.5 FIRMWARE UPGRADE ................................................................................................56
8.6 AUTO UPDATE .........................................................................................................57
8.7 VEHICLE LIST............................................................................................................58
8.8 SYSTEM SETTINGS.....................................................................................................58
8.9 ABOUT ...................................................................................................................58
UPDATE .................................................................................................................59
SUPPORT............................................................................................................61
10.1 PRODUCT REGISTRATION ........................................................................................61
vi
10.2 SUPPORT SCREEN LAYOUT ......................................................................................62
REMOTE DESKTOP..............................................................................................64
MAXIVIEWER .....................................................................................................66
QUICK LINK ........................................................................................................68
MAXIVIDEO........................................................................................................69
14.1 ADDITIONAL ACCESSORIES ......................................................................................70
14.2 OPERATIONS ........................................................................................................73
MAINTENANCE AND SERVICE.............................................................................75
15.1 MAINTENANCE INSTRUCTIONS.................................................................................75
15.2 TROUBLESHOOTING CHECKLIST ................................................................................76
15.3 ABOUT BATTERY USAGE .........................................................................................76
15.4 SERVICE PROCEDURES............................................................................................77
COMPLIANCE INFORMATION .............................................................................80
WARRANTY........................................................................................................82
17.1 LIMITED ONE YEAR WARRANTY ...............................................................................82
1
Using this Manual
This manual contains device usage instructions for the Autel MaxiDAS DS808S.
Some illustrations shown in this manual may contain modules and optional equipment
that are not included in your system.
1.1 Conventions
The following conventions are used:
Bold Text
Bold text is used to highlight selectable items such as buttons and menu options.
Example:
⚫Tap OK.
Notes and Important Messages
Notes
A NOTE provides helpful information such as additional explanations, tips, and
comments.
Example:
NOTE
New batteries reach full capacity after approximately 3 to 5 charging and discharging
cycles.
Important
IMPORTANT indicates a situation which, if not avoided, may result in damage to the
tablet or vehicle.
Example:
IMPORTANT
Keep the cable away from heat, oil, sharp edges and moving parts. Replace damaged
cables immediately.
2
Hyperlinks
Hyperlinks are available in electronic documents. Blue italic text indicates a selectable
hyperlink and blue underlined text indicates a website link or an email address link.
Illustrations
Illustrations used in this manual are samples, the actual testing screen may vary for each
vehicle being tested. Observe the menu titles and on-screen instructions to make correct
option selection.
Procedures
An arrow icon indicates a procedure.
Example:
➢To power down the tablet
1. Press and hold the Power/Lock button.
2. Tap Power off. The tablet will turn off in a few seconds.
3
General Introduction
When it comes to ultra-portability, MaxiDAS DS808S is your perfect companion. Installed
with a fast quad-core processor, DS808S offers maximum convenience and swift
diagnosis. The intuitive user screen makes using the device effortless through a 7-inch
LCD touchscreen that displays at 1024 x 600 quality. Together with the ability to quickly
read and clear DTCs for all available modules of the majority of the makes and models
on the market, DS808S provides you with superior special functions, including Oil Reset,
EPB (Electronic Parking Brake), SAS (Steering Angle Sensor), BMS (Battery
Management System), DPF (Diesel Particulate Filter), IMMO, and TPMS (Tire Pressure
Monitoring System).
This manual describes the construction and operation of the device and how it works to
deliver diagnostic solutions.
2.1 MaxiDAS DS808S Tablet
2.1.1 Product Overview
Figure 2-1 Tablet Front View
1. 7.0”LCD Capacitive Touchscreen
2. Ambient Light Sensor —detects ambient brightness.
3. Power LED —indicates battery level & charging or system status.
4. Vehicle Communication LED —flashes green when the tablet is communicating with
the vehicle’s system.
The power LED displays green, yellow or red depending on power level and operating
status.
4
A. Green
⚫Illuminates green when the tablet is charging and the battery level is above 90%.
⚫Illuminates green when the tablet is powered on and the battery level is above
15%.
B. Yellow
⚫Illuminates yellow when the tablet is chargingand the battery level is below 90%.
C. Red
⚫Illuminates red when the tablet is poweredon and the battery level is below 15%
or an error has occurred.
Figure 2-2 Tablet Top View
5. Mini USB Port
6. Micro SD Card Slot —holds the micro SD card.
7. DB15-Pin Port —connects the main cable.
8. USB Port
9. Power/Lock Button —press and hold to turn the tablet on/off or tap to unlock the
tablet.
Figure 2-3 Tablet Rear View
10. Heat Sink
11. Collapsible Stand —extends from the back to allow hands-free viewing of the tablet.
Tabla de contenidos
Otros manuales de Equipo de diagnóstico de Autel
Autel
Autel MaxiBAS BT609 Manual de usuario
Autel
Autel MaxiFlash VCMI Manual de usuario
Autel
Autel MaxiSys MS908SP Manual de usuario
Autel
Autel MaxiDAS DS708 Manual de usuario
Autel
Autel MaxiPRO MP808BT Manual de usuario
Autel
Autel OTOFIX D1 Manual de usuario
Autel
Autel MaxiCheck MX808 Manual de usuario
Autel
Autel AutoLink AL629 Manual de usuario
Autel
Autel OTOFIX D1 Pro Manual de usuario
Autel
Autel MaxiDAS DS708 Manual de usuario
Autel
Autel MaxiTPMS TS608 Manual de usuario
Autel
Autel MaxiCheck DS808BT Manual de usuario
Autel
Autel MaxiVideo MV301 Manual de usuario
Autel
Autel MaxiVCI V100 Manual de usuario
Autel
Autel Maxiim IM608 Pro Manual de usuario
Autel
Autel OTOFIX EvoScan Ultra Manual de usuario
Autel
Autel MaxiSys MS908CV II Manual de usuario
Autel
Autel MaxiAP AP100 Manual de usuario
Autel
Autel MaxiTPMS TS508 Manual de usuario
Autel
Autel MaxiSys MS909CV Manual de usuario
