Autel MaxiIM KM100E Manual de usuario

Trademarks

Autel®, MaxiIM®, MaxiCOM®, MaxiDAS®, MaxiScan®, MaxiTPMS®,

MaxiRecorder®, and MaxiCheck® are trademarks of Autel Intelligent Technology

Corp., Ltd., registered in China, the United States and other countries. All other

marks are trademarks or registered trademarks of their respective holders.

No part of this manual may be reproduced, stored in a retrieval system or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise without the prior written permission of Autel.

Disclaimer of Warranties and Limitation of Liabilities

All information, specifications and illustrations in this manual are based on the

latest information available at the time of printing. Autel reserves the right to make

changes at any time without notice. While information of this manual has been

carefully checked for accuracy, no guarantee is given for the completeness and

correctness of the contents, including but not limited to the product specifications,

functions, and illustrations.

Autel will not be liable for any direct damages or for any special, incidental, or

indirect damages or for any economic consequential damages (including the loss

of profits).

IMPORTANT: Before operating or maintaining this unit, please read this manual

carefully, paying extra attention to the safety warnings and precautions.

For Services and Support:

pro.autel.com

www.autel.com

1-855-288-3587 (North America)

+86 (0755) 8614-7779 (China)

[email protected]

For technical assistance in all other markets, please refer to Technical Support

in this manual.

Safety Information

For your own safety and the safety of others, and to prevent damage to the device

and vehicles upon which it is used, it is important that the safety instructions

presented throughout this manual be read and understood by all persons

operating or coming into contact with the device.

There are various procedures, techniques, tools, and parts for servicing vehicles,

as well as in the skill of the person doing the work. Because of the vast number

of test applications and variations in the products that can be tested with this

equipment, we cannot possibly anticipate or provide advice or safety messages

to cover every circumstance. It is the automotive technician’s responsibility to be

knowledgeable of the system being tested. It is crucial to use proper service

methods and test procedures. It is essential to perform tests in an appropriate

and acceptable manner that does not endanger your safety, the safety of others

in the work area, the device being used, or the vehicle being tested.

Before using the device, always refer to and follow the safety messages and

applicable test procedures provided by the manufacturer of the vehicle or

equipment being tested. Use the device only as described in this manual. Read,

understand, and follow all safety messages and instructions in this manual.

Safety Messages

Safety messages are provided to help prevent personal injury and equipment

damage. All safety messages are introduced by a signal word indicating the

hazard level.

DANGER: Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury to the operator or to

bystanders.

WARNING: Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury to the operator or to

bystanders.

iii

Safety Instructions

The safety messages herein cover situations Autel is aware of. Autel cannot know,

evaluate or advise you as to all of the possible hazards. You must be certain that

any condition or service procedure encountered does not jeopardize your

personal safety.

DANGER: When an engine is operating, keep the service area WELL

VENTILATED or attach a building exhaust removal system to the engine

exhaust system. Engines produce carbon monoxide, an odorless,

poisonous gas that causes slower reaction time and can lead to serious

personal injury or loss of life.

Do Not Turn the Volume Up Too Loud When Using Headphones

Listening at high volumes that over-stimulate the ear for long periods of

time may result in loss of hearing.

SAFETY WARNINGS:

⚫Always perform automotive testing in a safe environment.

⚫Wear safety eye protection that meets ANSI standards.

⚫Keep clothing, hair, hands, tools, test equipment, etc., away from all

moving or hot engine parts.

⚫Operate the vehicle in a well-ventilated work area.

⚫Put the transmission in PARK (for automatic transmission) or

NEUTRAL (for manual transmission) and make sure the parking

brake is engaged.

⚫Put blocks in front of the drive wheels and never leave the vehicle

unattended while testing.

⚫Be extra cautious when working around the ignition coil, distributor

cap, ignition wires and spark plugs. These components create

hazardous voltages when the engine is running.

⚫Keep a fire extinguisher suitable for gasoline, chemical, and

electrical fires nearby.

⚫Do not connect or disconnect any test equipment while the ignition

is on or the engine is running.

⚫Keep the test equipment dry, clean, and free from oil, water, and

grease. Use a mild detergent on a clean cloth to clean the outside

of the equipment as necessary.

⚫Do not drive the vehicle and operate the test equipment at the same

time. Any distraction may cause an accident.

⚫Refer to the service manual for the vehicle being serviced and

adhere to all diagnostic procedures and precautions. Failure to do

so may result in personal injury or damage to the test equipment.

⚫To avoid damaging the test equipment or generating false data,

make sure the vehicle battery is fully charged and the connection

to the vehicle DLC is clean and secure.

⚫Do not place the test equipment on the distributor of the vehicle.

Strong electro-magnetic interference can damage the equipment.

⚫Do not place the device in a strong electromagnetic environment

for strong electromagnetic interference may damage the device.

 
v 
 
CONTENTS 
Safety Information ...............................................................................................ii 
Using This Manual........................................................................................1 
1 Conventions.............................................................................................1 
General Introduction....................................................................................3 
1 MaxiIM KM100.........................................................................................3 
2 MaxiVCI V200 —Vehicle Communication Interface .....................................6 
Getting Started ............................................................................................8 
1 Powering Up ............................................................................................8 
2 Powering Down......................................................................................12 
Universal Key.............................................................................................13 
1 Confirm Vehicle Information....................................................................13 
2 Operation ..............................................................................................16 
Reading/Cloning ........................................................................................17 
1 Transponder Reading..............................................................................17 
2 Transponder Cloning...............................................................................18 
3 Transponder Editing ...............................................................................20 
Transponder Function ................................................................................22 
1 Transponder Generation .........................................................................22 
2 Transponder Simulation..........................................................................24 
3 Frequency Detection...............................................................................26 
IMMO .......................................................................................................27 
1 Getting Started.......................................................................................27 

 
vi 
 
2 Vehicle Identification ..............................................................................28 
3 IMMO Screen Layout ..............................................................................30 
4 Screen Messages ....................................................................................31 
5 Making Selections...................................................................................32 
6 IMMO ...................................................................................................32 
Special Functions .......................................................................................40 
1 IMMO Data Processing............................................................................40 
2 Key Unlocking ........................................................................................43 
4 Universal Key Information Detection........................................................45 
5 Button Customization .............................................................................45 
Ignition Coil Detection..................................................................................47 
Settings .....................................................................................................49 
1 Market ................................................................................................49 
2 Feedback .............................................................................................49 
3 VCI Manager ........................................................................................50 
4 System Settings ....................................................................................53 
5 Units ...................................................................................................53 
6 About ..................................................................................................54 
Updates.....................................................................................................55 
Data Manager............................................................................................57 
1 Test Records ........................................................................................57 
2 Workshop Information..........................................................................58 
3 Image ..................................................................................................59 
4 PDF .....................................................................................................60 

 
vii 
 
5 Uninstall Apps ......................................................................................60 
6 Data Logging ........................................................................................60 
Remote Desktop ........................................................................................62 
Tool Registration........................................................................................64 
Academy ...................................................................................................65 
Maintenance and Service............................................................................66 
1 Maintenance Instructions......................................................................66 
2 Troubleshooting Checklist .....................................................................67 
3 About Battery Usage.............................................................................67 
4 Service Procedures ...............................................................................68 
Compliance Information.............................................................................72 
Warranty...................................................................................................74 
1 Limited One-Year Warranty ...................................................................74 

1.Using This Manual

This manual contains device usage instructions.

Some illustrations shown in this manual may contain modules and optional

equipment that are not included in your system. Contact your sales

representative for availability of other modules and optional tools or accessories.

1.1 Conventions

The following conventions are used.

1.1.1 Bold Text

Bold text is used to highlight selectable items such as buttons and menu options.

Example:

⚫Tap OK.

1.1.2 Notes

A NOTE provides helpful information such as additional explanations, tips, and

comments.

1.1.3 Important

IMPORTANT indicates a situation which, if not avoided, may result in damage to

the test equipment or vehicle.

1.1.4 Hyperlinks

Hyperlinks or links that take you to other related articles, procedures, and

illustrations are available in electronic documents. Blue italic colored text

indicates a selectable hyperlink.

1.1.5 Procedures

An arrow icon indicates a procedure.

➢To power down the tool

Press and hold the Power/Lock button.

Tap Power off.

Tap OK. The tool will turn off in a few seconds.

2.General Introduction

The MaxiIM KM100 is a professional intelligent key tool that integrates such

functions as universal key generation, transponder reading/cloning, and IMMO

learning in a compact and easy-to-use design. Equipped with the MaxiVCI V200

vehicle communication interface device, this professional key tool easily offers

you one-stop service from universal key generation to key learning. It is

undoubtedly an ideal choice for professional locksmiths.

2.1 MaxiIM KM100

2.1.1 Product Overview

Figure 2-1 KM100 Front/Back View

1. 5.5-inch Touchscreen

2. Ambient Light Sensor — detects ambient brightness

3. Status LED

4. Low Frequency Detection Collector — collects low frequency data

5. Transponder Slot — reads and writes transponder

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de diagnóstico de Autel

Autel

Autel MaxiDiag Pro MD801 Manual de usuario

Autel

Autel MaxiTPMS TS508 Hoja de información del producto

Autel

Autel MaxiTPMS TS508K Manual de usuario

Autel

Autel MaxiSys ADAS Manual de usuario

Autel

Autel OTOFIX D1 Pro Manual de usuario

Autel

Autel MaxiTPMS TS508 Manual de usuario

Autel

Autel MaxiIM KM100 Manual de usuario

Autel

Autel MaxiPRO MP808K Manual de usuario

Autel

Autel TS609 Manual de usuario

Autel

Autel OTOFIX D1 Pro Manual de usuario

Autel

Autel MaxiBAS BT609 Manual de usuario

Autel

Autel MaxiLink ML519 Manual de usuario

Autel

Autel TR201 Manual de usuario

Autel

Autel MaxiDAS DS808S Manual de usuario

Autel

Autel MaxiCOM MK906 Pro Manual de usuario

Autel

Autel MAXISYS MS906 Manual de usuario

Autel

Autel Maxiscan MS509 Manual de usuario

Autel

Autel AutoLink AL629 Manual de usuario

Autel

Autel MaxiAP AP200M Manual de usuario

Autel

Autel MaxiDAS DS708 Manual de usuario

Autel

Autel MaxiCheck MX808TS Manual de usuario

Autel

Autel MaxiCheck MX808 Manual de usuario

Autel

Autel OTOFIX EvoScan Ultra Manual de usuario

Autel

Autel Maxiim IM608 Pro Manual de usuario

Manuales populares de Equipo de diagnóstico de otras marcas

Mindray

Mindray M7Vet Guía de inicio rápido

TEXA

TEXA TMD2 Manual de usuario

Sealey

Sealey BT2012 Manual de usuario

Diagnoptics

Diagnoptics Age Reader Manual de usuario

LAUNCH TECH

LAUNCH TECH X-431 PRO5 Manual de usuario

Hella Gutmann

Hella Gutmann Mega macs X Manual de usuario

Foxwell

Foxwell I80TS Manual de usuario

KaVo

KaVo 3D eXam Manual de usuario

ATEQ

ATEQ VT46 Manual de usuario

Hella Gutmann

Hella Gutmann mega macs X Manual de usuario

Qiagen

Qiagen QIAcube Connect MDx Manual de usuario

Alber

Alber BDSU Manual de usuario

St. Jude Medical

St. Jude Medical QUANTIEN Manual de usuario

Bosch

Bosch DCU 100 Manual de usuario

Launch

Launch CNC-602A Manual de usuario

Innova

Innova 3568 Manual de usuario

FujiFilm

FujiFilm ED-580XT Manual de usuario

Snap-On

Snap-On Zeus Manual de usuario