AURES ODP 444 Manual de usuario
Receipt Printer User’s Manual
MODEL : ODP 444
All specifications are subject to change without notice
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions.
1) This device may not cause harmful interference, and
2) This device must accept any interference received,
including interference that may cause undesired operation.
Jeff Burroughs
15042 Parkway Loop, Building D, Tustin, CA 92780 | USA
+714.669.3111
FR
Le Groupe Aures vous remercie de votre confiance.
Téléchargez nos derniers drivers et utilitaires
ainsi que nos conseils d’installation sur le site
du Support Technique AURES :
www.aures-support.fr
UK
The AURES Group thanks you for your loyalty.
To download out most recent drivers and utilities and
obtain advice regarding the installation of your equipment,
please visit the AURES Technical Support Website :
www.aures-support.fr/UK
DE
Die AURES Gruppe bedankt sich für lhre Bestellung.
Um unsereneuesten Treiber, Utilities
und Konfigurationsratschläge zu lhren Produkten
herunterzuladen besuchen Sie bitte unsere
technische Support-Website :
www.aures-support.fr/DE
2
Table of Contents
1. Parts Identications 3
2. Setting up the printer 4
2.1 Unpacking 4
2.2 Connecting the cables 5
2.3 Loading the roll paper 8
2.4 Cable cover 설치 및 분리 10
2.5 Jam Error 12
3. Control panel and other functions 15
3.1 Control panel 15
3.2 Error Indicating 15
4. Self Test 16
5. ASCII Print 17
6. ECO Mode 17
6.1 Font 17
6.2 Paper Reduce 18
6.3 Density 18
7. Printer Setting 19
7.1 Baudrate 19
7.2 Cutter 19
7.3 Error Beep 19
8. Hexadecimal Dump 20
9. Peripherals Connection 21
9.1 Bluetooth Connection 21
9.2 Wi-Fi Connection 21
9.3 NFC Connection 22
10. Printer Cleaning 23
11. Specications 24
12. Command List 26
3
1. Parts Identifications
CONTROL PANEL
FEED BUTTON
COVER OPEN PUSH BUTTON
POWER SWITCH
Features LED indicators
to indicate printer status
and switches to operate
the printer.
Push down this button to
open the printer cover.
Used to turn on/off
power to the printer.
PRINTER COVER
Open this cover to load or
replace a paper roll.
4
2-1. Unpacking
Your printer box should include these items. If any items are damaged or missing, please contact your
dealer for assistance.
The Printer CD Roll Paper
2. Setting Up the Printer
Adaptor Serial Cable 1 Serial Cable 2
USB Cable
5
2-2. Connecting the Cables
All cables connect to the connector panel on the back of the printer which is shown below:
Before connecting any of the cables, make sure that both the printer and the computer are turned off.
CASH DRAWER CONNECTOR ETHERNET CONNECTOR
ETHERNET SWITCH
POWER CONNECTOR USB CONNECTOR SERIAL CONNECTOR
6
2-2-1. Interface Connector
<9 Pin Serial> <USB “B” Type>
<Ethernet>
9Pin Serial Interface
Pin Signal I/O Description
2 RXD Input Printer receive data line RS-232C level
3 TXD Output Printer transmit data line RS-232C level
4, 7 DTR Output Printer handshake to host line RS-232C level
5 GND - System Ground
6 DSR Input Data Send Ready
1,8,9 NC -
USB Interface
Pin Signal I/O Description
1 +5V - +5V
2DATA- - Printer transmit data line
3DATA+ - Printer transmit data line
4 GND - System Ground
7
Ethernet Interface
PIN SIGNAL I/O
1 Data Out + Output Data +
2 Data Out - Output Data -
3 Data IN + Input Data +
4N.C
5N.C
6 Data IN - Input Data -
7N.C
8N.C
This equipment is indoor use and all the communication wirings are limited to inside of the building.
2-2-2. Cash Drawer Connector
The printer can operate a cash drawer with a 6 pin RJ-11 modular connector.
The driver is capable of supplying a maximum current of 1.0A for 510ms or less when not printing.
PIN SIGNAL DESCRIPTION
1 Signal GND -
2 Drawer kick-out drive signal 1 Output
3 Drawer open/close signal Input
4 +24V -
5 Drawer kick-out drive signal 2 Output
6 Signal GND -
8
2-3. Loading the Roll Paper
Notes: Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the
paper glued to the core because the printer cannot detect the paper end correctly.
♣Turn off power switch.
1. Make sure that the printer is not receiving data; Otherwise, data may be lost.
2. Open the printer cover by pushing down the cover open push button.
3. Remove the used paper roll core if there is one inside.
4. Insert new paper roll as shown.
Tabla de contenidos
Otros manuales de Impresora de AURES
AURES
AURES ODP 300 Manual de usuario
AURES
AURES TRP100 Manual de usuario
AURES
AURES SMP 58 Manual de usuario
AURES
AURES ODP 333 Manual de usuario
AURES
AURES TRP100 Manual de usuario
AURES
AURES ODP-200H-III Manual de usuario
AURES
AURES Posligne ODP-1000 Manual de usuario
AURES
AURES TRP100-III Manual de usuario
AURES
AURES ODP 300 Manual de usuario
AURES
AURES SLP 580 Manual de usuario
