Atmel SAM HA1G16A Xplained Pro Manual de usuario

Atmel Smart Microcontrollers

SAM HA1G16A Xplained Pro

USER GUIDE

Preface

The Atmel® SAM HA1G16A Xplained Pro evaluation kit is a hardware

platform to evaluate the ATSAMHA1G16A microcontroller.

Supported by the Atmel Studio integrated development platform, the kit

provides easy access to the features of the Atmel ATSAMHA1G16A and

explains how to integrate the device in a custom design.

The Xplained Pro MCU series evaluation kits include an on-board

Embedded Debugger, and no external tools are necessary to program or

debug the ATSAMHA1G16A.

The Xplained Pro extension kits offers additional peripherals to extend the

features of the board and ease the development of custom designs.

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.

Table of Contents

Preface............................................................................................................................ 1

1. Introduction................................................................................................................3

1.1. SAM HA1G16A Xplained Pro Introduction................................................................................... 3

1.2. SAM HA1G16A Xplained Pro Feature list.................................................................................... 3

2. Getting Started...........................................................................................................4

2.1. Xplained Pro Quick Start.............................................................................................................. 4

2.2. SAM HA1G16A Xplained Pro Design Documentation and relevant links.................................... 4

3. Xplained Pro.............................................................................................................. 6

3.1. Embedded Debugger................................................................................................................... 6

3.2. Hardware Identification System....................................................................................................7

3.3. Power Sources............................................................................................................................. 7

3.4. Xplained Pro Headers and Connectors........................................................................................8

4. Hardware User Guide.............................................................................................. 11

4.1. Connectors................................................................................................................................. 11

4.2. Peripherals................................................................................................................................. 14

4.3. Embedded Debugger Implementation........................................................................................16

5. Hardware Revision History and Known Issues........................................................18

5.1. Identifying Product ID and Revision........................................................................................... 18

5.2. Revision 3...................................................................................................................................18

6. Revision History.......................................................................................................19

7. Evaluation Board/Kit Important Notice.....................................................................20

8. FCC_note................................................................................................................ 21

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.Downloaded from Arrow.com.

1. Introduction

1.1. SAM HA1G16A Xplained Pro Introduction

The Atmel SAM HA1G16A Xplained Pro evaluation kit is a hardware platform to evaluate the Atmel

ATSAMHA1G16A.

The kit offers a set of features that enables the ATSAMHA1G16A user to get started with the SAM HA1

peripherals right away and to get an understanding of how to integrate the device in their own design.

Figure 1-1. SAM HA1G16A Xplained Pro Evaluation Kit Overview

1.2. SAM HA1G16A Xplained Pro Feature list

•SAMHA1G16A System in Package

•One mechanical reset button

•One mechanical programmable button

•One yellow user LED

•Two Xplained Pro extension headers

•One High-Voltage extension header

•Embedded Debugger

–Auto-ID for board identification in Atmel Studio

–One yellow status LED

–One green board power LED

–Programming and debugging

–Data Gateway Interface: I2C, SPI and four GPIOs

–Virtual COM port (CDC)

•USB powered

•Supported with application examples in Atmel Software Framework

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

2. Getting Started

2.1. Xplained Pro Quick Start

Steps to start exploring the Atmel Xplained Pro platform:

1. Download Atmel Studio.

2. Launch Atmel Studio.

3. Connect the DEBUG USB port on the kit to the PC using a USB cable (Standard-A to Micro-B or

Micro-AB).

When the Xplained Pro MCU kit is connected to the computer for the first time, the operating system will

install the software driver. The driver file supports both 32- and 64-bit versions of Microsoft® Windows®

XP, Windows Vista®, Windows 7, Windows 8, Windows 10, and Windows Server 2012.

When the Xplained Pro MCU board is powered, the green power LED will glow and Atmel Studio will

auto-detect the specific Xplained Pro MCU- and extension board(s) that are connected. Atmel Studio will

present relevant information such as datasheets and kit documentation. The kit landing page in Atmel

Studio also has an option to launch the Atmel Software Framework (ASF) example applications for the kit.

The SAM HA1 device is programmed and debugged by the on-board Embedded Debugger and therefore

no external programmer or debugger tool is required.

2.2. SAM HA1G16A Xplained Pro Design Documentation and relevant links

The following list contains links to the most relevant documents and software for the SAM HA1G16A

Xplained Pro.

•Xplained products - Atmel Xplained evaluation kits are a series of easy-to-use evaluation kits for

Atmel microcontrollers and other Atmel products. For low pin-count devices the Xplained Nano

series provides a minimalistic solution with access to all I/O pins of the target microcontroller.

Xplained Mini kits are for medium pin-count devices and adds Arduino UNO compatible header

footprint and a prototyping area. Xplained Pro kits are for medium to high pin-count devices, they

features advanced debugging and standardized extensions for peripheral functions. All these kits

have on board programmers/debuggers which creates a set of low-cost boards for evaluation and

demonstration of features and capabilities of different Atmel products.

•Atmel Studio - Free Atmel IDE for development of C/C++ and assembler code for Atmel

microcontrollers.

•Atmel sample store - Atmel sample store where you can order samples of devices.

•EDBG User Guide - User guide containing more information about the on-board Embedded

Debugger.

•IAR Embedded Workbench® for ARM® - This is a commercial C/C++ compiler that is available for

ARM®. There is a 30 day evaluation version as well as a code size limited kick-start version

available from their website. The code size limit is 16KB for devices with M0, M0+, and M1 cores

and 32KB for devices with other cores.

•Atmel QTouch® Library PTC - QTouch Library for Atmel AVR® and ARM®-based microcontrollers.

•Atmel QTouch® Composer - Tool for developing capacitive buttons, sliders, and wheels

applications.

•Atmel Data Visualizer - Atmel Data Visualizer is a program used for processing and visualizing

data. Data Visualizer can receive data from various sources such as the Embedded Debugger Data

Gateway Interface found on Xplained Pro boards and COM ports.

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

•Design Documentation - Package containing CAD source, schematics, BOM, assembly drawings,

3D plots, layer plots etc.

•Hardware Users Guide in PDF format - PDF version of this User Guide.

•SAM HA1G16A Xplained Pro in the Atmel store - Atmel Store link.

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

3. Xplained Pro

Xplained Pro is an evaluation platform that provides the full Atmel microcontroller experience. The

platform consists of a series of Microcontroller (MCU) boards and extension boards, which are integrated

with Atmel Studio, have Atmel Software Framework (ASF) drivers and demo code, support data

streaming, and more. Xplained Pro MCU boards support a wide range of Xplained Pro extension boards,

which are connected through a set of standardized headers and connectors. Each extension board has

an identification (ID) chip to uniquely identify which boards are connected to an Xplained Pro MCU board.

This information is used to present relevant user guides, application notes, datasheets, and example

code through Atmel Studio.

3.1. Embedded Debugger

The SAM HA1G16A Xplained Pro contains the Atmel Embedded Debugger (EDBG) for on-board

debugging. The EDBG is a composite USB device of three interfaces; a debugger, Virtual COM Port, and

a Data Gateway Interface (DGI).

Together with Atmel Studio, the EDBG debugger interface can program and debug the ATSAMHA1G16A.

On SAM HA1G16A Xplained Pro, the SWD interface is connected between the EDBG and the

ATSAMHA1G16A.

The Virtual COM Port is connected to a UART on the ATSAMHA1G16A and provides an easy way to

communicate with the target application through terminal software. It offers variable baud rate, parity, and

stop bit settings. Note that the settings on the ATSAMHA1G16A must match the settings given in the

terminal software.

Info: The Virtual COM Port in the EDBG requires the terminal software to set the data terminal

ready (DTR) signal to enable the UART pins connected to the ATSAMHA1G16A. If the DTR

signal is not enabled the UART pins on the EDBG is kept in high-z (tristate) rendering the COM

port unusable. The DTR signal is set automatically by some terminal software, but it may have

to be manually enabled in your terminal.

The DGI consists of several physical interfaces for communication with the host computer.

Communication over the interfaces is bidirectional. It can be used to send events and values from the

ATSAMHA1G16A or as a generic printf-style data channel. Traffic over the interfaces can be timestamped

on the EDBG for more accurate tracing of events. Note that timestamping imposes an overhead that

reduces maximal throughput. Atmel Data Visualizer is used to send and receive data through DGI.

The EDBG controls two LEDs on SAM HA1G16A Xplained Pro; a power LED and a status LED. The

table below shows how the LEDs are controlled in different operation modes.

Table 3-1. EDBG LED Control

Operation Mode Power LED Status LED

Normal operation Power LED is lit when power is

applied to the board.

Activity indicator, LED flashes

when any communication

happens to the EDBG.

Bootloader mode (idle) The power LED and the status LED blinks simultaneously.

Bootloader mode (firmware

upgrade)

The power LED and the status LED blinks in an alternating pattern.

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

For further documentation on the EDBG, see the EDBG User Guide.

3.2. Hardware Identification System

All Xplained Pro compatible extension boards have an Atmel ATSHA204 CryptoAuthentication™ chip

mounted. This chip contains information that identifies the extension with its name and some extra data.

When an Xplained Pro extension is connected to an Xplained Pro MCU board the information is read and

sent to Atmel Studio. The Atmel Kits extension, installed with Atmel Studio, will give relevant information,

code examples, and links to relevant documents. The table below shows the data fields stored in the ID

chip with example content.

Table 3-2. Xplained Pro ID Chip Content

Data Field Data Type Example Content

Manufacturer ASCII string Atmel'\0'

Product Name ASCII string Segment LCD1 Xplained Pro'\0'

Product Revision ASCII string 02'\0'

Product Serial Number ASCII string 1774020200000010’\0’

Minimum Voltage [mV] uint16_t 3000

Maximum Voltage [mV] uint16_t 3600

Maximum Current [mA] uint16_t 30

3.3. Power Sources

The SAM HA1G16A Xplained Pro kit can be powered by several power sources as listed in the table

below.

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Table 3-3. Power Sources for SAM HA1G16A Xplained Pro

Power Input Voltage Requirements Current Requirements Connector Marking

External power 5V ±2% (±100mV) for

USB host operation.

4.3V to 5.5V if USB host

operation is not

required.

Recommended

minimum is 1A to be

able to provide enough

current for connected

USB devices and the

board itself.

Recommended

maximum is 2A due to

the input protection

maximum current

specification.

PWR

Embedded debugger

USB

4.4V to 5.25V (according

to USB spec.)

500mA (according to

USB spec.)

DEBUG USB

External HV input 6V to 28V Voltage regulator in SBC

is specified for up to

85mA. This input also

supplies the LIN Bus

and all the other

features of the SBC. It's

recommended to use at

least 500mA.

VS and GND on

Connector HV

The kit will automatically detect which power sources are available and choose which one to use

according to the following priority:

1. External power.

2. Embedded Debugger USB.

3. External HV input

Note: The selection for the supply of the Target MCU has a separate connector. The above priority

selects which supply is used to power the EDBG and the VCC_P3V3_CON.

Info: External power is required when 500mA from a USB connector is not enough to power

the board with possible extension boards.

3.4. Xplained Pro Headers and Connectors

3.4.1. Xplained Pro Standard Extension Header

All Xplained Pro kits have one or more dual row, 20-pin, 100mil extension header. Xplained Pro MCU

boards have male headers, while Xplained Pro extensions have their female counterparts. Note that all

pins are not always connected. All connected pins follow the defined pin-out description in the table

below.

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

The extension headers can be used to connect a variety of Xplained Pro extensions to Xplained Pro MCU

boards or to access the pins of the target MCU on Xplained Pro MCU boards directly.

Table 3-4. Xplained Pro Standard Extension Header

Pin Number Name Description

1 ID Communication line to the ID chip on an extension board

2 GND Ground

3 ADC(+) Analog to digital converter, alternatively positive part of differential

ADC

4 ADC(-) Analog to digital converter, alternatively negative part of differential

ADC

5 GPIO1 General purpose I/O

6 GPIO2 General purpose I/O

7 PWM(+) Pulse width modulation, alternatively positive part of differential

PWM

8 PWM(-) Pulse width modulation, alternatively negative part of differential

PWM

9 IRQ/GPIO Interrupt request line and/or general purpose I/O

10 SPI_SS_B/

GPIO

Slave select for SPI and/or general purpose I/O

11 I2C_SDA Data line for I2C interface. Always implemented, bus type.

12 I2C_SCL Clock line for I2C interface. Always implemented, bus type.

13 UART_RX Receiver line of target device UART

14 UART_TX Transmitter line of target device UART

15 SPI_SS_A Slave select for SPI. Should preferably be unique.

16 SPI_MOSI Master out slave in line of serial peripheral interface. Always

implemented, bus type.

17 SPI_MISO Master in slave out line of serial peripheral interface. Always

implemented, bus type.

18 SPI_SCK Clock for serial peripheral interface. Always implemented, bus type.

19 GND Ground

20 VCC Power for extension board

3.4.2. Xplained Pro Power Header

The power header can be used to connect external power to the SAM HA1G16A Xplained Pro kit. The kit

will automatically detect and switch to any external power if supplied. The power header can also be used

as supply for external peripherals or extension boards. Care must be taken not to exceed the total current

limitation of the on-board regulator when using the 3.3V pin.

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Table 3-5. Xplained Pro Power Header

Pin Number Pin Name Description

1 VEXT_P5V0 External 5V input

2 GND Ground

3 VCC_P5V0 Unregulated 5V (output, derived from one of the input

sources)

4 VCC_P3V3 Regulated 3.3V (output, used as main power supply for the

kit)

3.4.3. Xplained Pro HV Header

This Xplained Pro kits has one, 20-pin, 100mil HV-extension header. Note that all pins are not always

connected. All connected pins follow the defined pin-out description in the table below.

Table 3-6. Xplained Pro HV Extension Header

Pin Number Name Description

1 ID Communication line to the ID chip on an extension board

2 GND Ground

3 NC

4 NC

5 LIN_GND GND of LIN SBC

6 NC

7 LIN LIN-Bus signal

8 NC

9 VS Battery voltage VS

10 NC

11 GND GND

12 NC

13 NC

14 NC

15 NC

16 NC

17 NC

18 NC

19 GND Ground

20 VCC Power for extension board

Atmel SAM HA1G16A Xplained Pro [USER GUIDE]

Atmel-9426A-SAM-HA1G16A-Xplained-Pro_User Guide-10/2016

Tabla de contenidos

Otros manuales de Microcontrolador de Atmel

Atmel

Atmel ATAB5749 Instrucciones de instalación y funcionamiento

Atmel

Atmel AVR AT90CAN64 Manual de usuario

Atmel

Atmel UC3-L0 Xplained Instrucciones de instalación y funcionamiento

Atmel

Atmel AT18F-DK3 Manual de usuario

Atmel

Atmel AT43DK355 Manual de usuario

Atmel

Atmel AVR 1908 Manual de usuario

Atmel

Atmel AT90S1200 Manual de usuario

Atmel

Atmel AVR STK100 Manual de usuario

Atmel

Atmel ATtiny26 Manual de usuario

Atmel

Atmel C51 Instrucciones de instalación y funcionamiento

Atmel

Atmel AVR1612 Instrucciones de instalación y funcionamiento

Atmel

Atmel AVR2131 Manual de usuario

Atmel

Atmel AVR Manual de usuario

Atmel

Atmel AT89C51 Guía del usuario

Atmel

Atmel AVR1921 Instrucciones de instalación y funcionamiento

Atmel

Atmel develer DevelBoard Blue Guía rápida de usuario

Atmel

Atmel SAM4N Xplained Pro Manual de usuario

Atmel

Atmel AT97SC3205T-SDK2 Manual de usuario

Atmel

Atmel AVR262 Instrucciones de instalación y funcionamiento

Atmel

Atmel AT32UC3A3256S Manual de usuario

Atmel

Atmel AVR AT90S4434 Manual de usuario

Atmel

Atmel AVR ATtiny15L Manual de usuario

Atmel

Atmel ATtiny13A Manual de usuario

Atmel

Atmel AT90S1200 Manual de usuario

Manuales populares de Microcontrolador de otras marcas

AMS

AMS AS7261 Demo Kit Manual de usuario

Novatek

Novatek NT6861 Manual de usuario

Espressif Systems

Espressif Systems ESP8266 SDK Guía de configuración

Nuvoton

Nuvoton ISD61S00 ChipCorder Guía

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manual de usuario

Texas Instruments

Texas Instruments Chipcon CC2420DK Manual de usuario

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manual de usuario

NEC

NEC 78GK0S/K 1+ Series Instrucciones de instalación y funcionamiento

Mikroe

Mikroe SEMITECH N-PLC Click Instrucciones de instalación y funcionamiento

Intel

Intel Agilex Manual de usuario

Cypress

Cypress CY4607 HX2VL Manual de usuario

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manual de usuario

Texas Instruments

Texas Instruments TMS320F2837 D Series Manual de usuario

CYPRES

CYPRES CY14NVSRAMKIT-001 Manual de usuario

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manual de usuario

Espressif Systems

Espressif Systems ESP8266EX Instrucciones de funcionamiento

Abov

Abov AC33M8128L Manual de usuario

Laird

Laird BL654PA Manual de usuario